617737
78
Zoom out
Zoom in
Previous page
1/111
Next page
75
Contents Setting Up
Basic Sewing
Machine
Operation
Utility Stitches Embroidering Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
Setting the fabric into the embroidery frame
1. Mark the fabric using a chalk pen or fabric marking pen to
indicate the embroidering position.
2. Loosen the adjusting screw and separate the inner and outer
frames. Lay the fabric on top of the outer frame and secure it
between the inner and outer frame, and tighten the adjusting
screw just enough to secure the fabric. Gently remove the fab-
ric from the frame without loosening the adjusting screw.
* Be sure to align the mark on the inner frame with the (
)
mark on the outer frame.
1 Inner frame
2 Outer frame
3 Loosen
4 Adjusting screw
3. Tighten screw of outer hoop to hold fabric and inner hoop in
place.
Remove fabric and inner hoop.
(For best results lay the outer frame on a flat table surface and
lay the fabric on top of it.)
4. Place the embroidery sheet into the inner frame, while match-
ing lines on the sheet with mark on fabric.
1 Inner frame
2 Standard line
1
2
3
4
1
2
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PE-300S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PE-300S in the language / languages: English as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info