480649
97
Zoom out
Zoom in
Previous page
1/104
Next page
94
Mechanical trouble
Probable cause
1. Feed dog is lowered.
2. Stitch length is set at no feeding.
3. The combination of selected stitch and
presser foot is not correct.
4. Correct needle is not being used.
5. Thread is entangled.
1. Needle is not correctly inserted.
2. Correct needle is not used.
3. The combination of fabric, thread and
needle is not correct.
4. The fabric is pulled too much.
1. “START/STOP” button is not pressed.
2. Main power switch is in the off position.
3. Presser foot is not lowered.
1. LCD contrast is not correct.
Remedy
1. Raise the feed dog with the feed dog
adjustment lever.
2. Set stitch length properly.
3. Change presser foot to correct one.
4. Change to proper needle.
5. Remove thread-ends in the race or
inner shuttle.
1. Set needle properly.
2. Change to proper needle.
3. Check the “FABRIC/THREAD/NEEDLE
COMBINATION CHART” on page 27.
4. Guide the fabric allowing it to sew
without pulling.
1. Press “START/STOP” button.
2. Turn the power on.
3. Lower the presser foot.
1. Adjust the LCD contrast with the
screen brightness control lever.
Symptom
1. Fabric is not fed properly
2. Needle breaks
3. Machine does not start
4. Display is hard to read
Note
If the power goes out while the sewing machine is being operated:
Turn off the sewing machine and unplug its power cord.
When the sewing machine is restarted, operate it correctly according to the operating procedure.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PC 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PC 3000 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info