480649
54
Zoom out
Zoom in
Previous page
1/104
Next page
51
1. Set the stitch length using the scale on presser foot A.
Pull on the end of the button holder plate to expand it. The
finished size of the bar tack will be the space shown in the
illustration.
1 Scale on the presser foot
2 Button holder plate
3 0.5 cm (13/64")
4 Length of darning
5 Width [7 mm (9/32")]
* The maximum stitch length for darning is 3 cm (1-13/64").
2. Check the needle drop point and then lower the presser foot.
* After the presser foot lever has been lowered, ad-
just the presser foot so that there is no gap behind
the section that is shaded in the illustration at the
right. Otherwise, the size of the stitch will not be
correct. To adjust the presser foot, push the presser
foot towards the back of the machine as shown in
the figure at the left.
* Pass the thread underneath the presser foot.
4. While lightly holding the upper thread, start sewing.
* Before stopping, the machine will automatically sew a rein-
forcement stitch after the darning is finished.
3. Lower the buttonhole lever and position it behind the metal
bracket on the buttonhole foot.
1 Metal bracket on the buttonhole foot
DARNING
19: For medium fabric
20: For thick fabric
19
20
A
1
2
3
5
4
4
6
5
6
5
1
6
5
A
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PC 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PC 3000 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info