480649
36
Zoom out
Zoom in
Previous page
1/104
Next page
33
Sewing on thick fabric
1. Raising the presser foot lever even further raises the presser
foot to a higher position allowing you to sew on thicker fabrics.
With the presser foot in the up position, raise the presser foot
lever even higher to make room for thicker fabrics.
Sewing a curve with a zigzag stitch
Set the stitch length short in order to obtain a fine stitch. Sew
slowly while keeping the seam parallel to the fabric edge as you
guide the fabric around the curve.
* For sharp corners, temporarily stop sewing with the needle in
the material, then raise the presser foot and carefully turn the
fabric while keeping it level with the presser foot. Lower the
presser foot and continue sewing.
Sewing on thin fabric
Place thin paper or stabilizer material under the fabric before sew-
ing.
* Use a straight stitch foot to eliminate any puckering. Remem-
ber to select the center needle position. Additional adjustment
of stitch length and tension may be necessary.
2. If the fabric will not feed at the beginning of sewing, place
another piece of fabric with the same thickness at the back of
the material.
6
5
6
5
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PC 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PC 3000 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info