480649
20
Zoom out
Zoom in
Previous page
1/104
Next page
17
2
5
1
4. While holding the end of the thread with your left hand, pass
the thread through the guides in the order shown by the num-
bers.
Note
- If the thread is pushed down at 1 to make it taut, it can be
passed around the other thread guides more easily.
- Incorrectly feeding the thread will result in faulty sewing.
1 Thread take-up lever
Threading the take-up lever
5. Lower the presser foot.
6. Guide the thread through the wire loop and thread through
needle eye.
1 Wire loop
* You do not need to pull the bobbin thread up before you start
sewing.
7. Pass the thread underneath the presser foot and pull it out
from the rear of the machine by about 5 cm.
Note
Always raise the presser foot before removing the upper thread from
the machine or damage may occur to the auto thread tension unit.
8. When using the auto-threading device, gently pull the thread
towards you.
1 Needle threader lever
2 Guide (Large hook)
* Lowering the presser foot will engage the automatic tension
and will allow you to grip the thread as you proceed.
1
2
1
2
4
1
1
5
2
11
9. Lower the needle threader lever all the way down using your
left index finger. Check that the thread is held by the guide
(large hook) and that the third hook on the needle threader
has passed through the eye of the needle.
1 Second set of hooks
2 Third hook
10. As you lower the needle threader lever, pull the thread to the
left and catch it on the large hook. When the needle threader
lever is in the lowest position, pull the thread in front of the
needles eye and catch it on the third hook.
5
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PC 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PC 3000 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info