718660
13
Zoom out
Zoom in
Previous page
1/181
Next page
13
Before using your machine
Description of buttons
Lamp display
The ON/OFF button lamp (blue) and Error lamp (red) indicate the current operating status.
Button Function
ON/OFF button ( )
Turns the printer on and off.
Feed and Cut button ( )
Feeds and cuts the printed labels.
Use this button when the auto cut option in the printing dialog
box is not checked.
* Feed and cut does not function when SZ tapes are
loaded.
Open Cover button Opens the cover.
Lamp Status
Printer Status
ON/OFF
Button (Blue)
Error Lamp
(Red)
Off Off
The printer is off.
On Off
The printer is working normally.
Flashing Off
The printer is receiving data from the computer.
Flashing On
The printer is receiving data from the computer, but unable
to print.
Load a tape cassette and close the cover.
On On
No tape cassette is loaded, or the cover is open.
Load a tape cassette and close the cover.
The Feed and Cut button was pressed when SZ tape is
loaded. (Unable to use the Feed and Cut button when SZ
tape is loaded.)
You reached the end of the SZ tape. Remove the SZ tape
cassette and check the surface of the tape. If "END" is
printed on the tape, replace the cassette with a new SZ
tape cassette.
On Flashing
A print job is received, but the printer cannot print. Load the
correct tape cassette and close the cover.
If ERROR is printed on the SZ tape, an error occurred
when writing data to the RFID tag or the tag is damaged.
Try printing again.
On
Flashing
Rapidly
Make sure that the tapes are not jammed in the printer.
Turn the printer off and on.
* If the problem is not solved, contact your dealer or
authorized service center.
On
Flashing Very
Rapidly
Turn off the printer, and then turn it on again.
* If the problem is not solved, contact your dealer or
authorized service center.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-Touch RL-700S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-Touch RL-700S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info