718660

Brother P-Touch RL-700S Manual

10
Zoom out
Zoom in
Previous page
1/181
Next page
Before using your machine
10
• Data reading may be significantly impaired if labels are applied directly to moist surfaces or
near them. Test operation before applying labels to surfaces.
• Do not bring SZ tape cassettes or RFID tags within 50 mm in front of, above, or on the right
side of the printer when it is in use. This may interfere data writing during printing.
• Do not bring SZ tape cassettes within the read range of other RFID reader/writers. This may
interfere data writing during printing.
• To avoid damaging labels, do not bundle the tape, put objects on it, or scratch it using hard
objects. Do not apply labels to objects where they will be subjected to strong vibration or
impact.
• Check where you will apply labels before applying them.
Once labels are applied, you cannot reapply them elsewhere after peeling them off.
• Do not attempt to disassemble the cassettes or labels.
• Depending on environmental conditions and the location and material of objects labelled,
labels may peel away, become irremovable, or leave a residue. Also, the label color may
change over time, and the surface underneath may be damaged.
• Do not apply labels to skin.
• Before setting the casette, take up any slack in the ribbon by winding it in the direction shown
1 - 2 times around.
• Note that the margin of the first label printed is larger than other labels.
• To avoid label damage or data loss, do not use labels in extremely high or low temperatures.
• Note that applying labels to curved surfaces will lower the read rate because the antenna will
be curved. Extremely curved surfaces may interfere reading, and the tape may peel off.
• Do not bend labels, which may break the antenna or damage the RFID tag.
• To avoid fire, do not put labels in microwave ovens.
• This product uses I-Code SLI RFID chips manufactured by NXP Semiconductors.
These chips are compatible with reader/writers conforming to ISO/IEC 15693 and 18000-3
standards. (Operation is not guaranteed with all reader/writers.)
• When introducing a system based on SZ tape labels, check the environment of use carefully
to ensure correct operation before use.
• When tape or labels are no longer needed, cut the RFID tag portion or take other measures
to interfere data reading or writing before disposal.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-Touch RL-700S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-Touch RL-700S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info