542757
6
Zoom out
Zoom in
Previous page
1/19
Next page
Introduction
4
Follow these guidelines to avoid fire, electric shock, or other damage.
Power Cord
Use only the authorized power source
(220 - 240 V AC) for the printer.
Use only the power cord included with
the printer.
Do not handle the power cord or plug if
your hands are wet.
Do not overload the power socket with
too many appliances or insert the power
cord into a damaged socket.
Do not cut, damage, alter or place heavy
objects on the power cord.
Do not use the power cord if it is
damaged.
Ensure the power plug is correctly
inserted into the power socket.
If the printer will not be used for an
extended period, remove the power
supply cord from the electrical socket.
CAUTION
Follow these guidelines to avoid fire, electric shock, or other damage.
The Printer
The standard electrical socket should be close to the printer and be easily accessible.
Power Cord
Always hold the power plug when removing the power cord from or inserting it into the
socket. Pulling on the power cord cable could cause problems with the power cord.
Cutter
Do not touch the blade of the cutter unit.
Do not open the top cover when the
cutter is operating.
Do not apply excessive pressure to the
cutter unit.
Installation/Storage
Place the printer on a flat, stable surface
such as a desk.
Do not place any heavy objects on top of
the printer.
DK Roll (DK Label, DK Tape)
Be careful not to drop the DK Roll.
DK Rolls use thermal paper and thermal
film. Both the label and print will fade
with sunlight and heat. Do not use DK
Rolls for outdoor use that require
durability.
Depending on the location, material, and
environmental conditions, the label may
unpeel or become irremovable, the
colour of the label may change or be
transferred to other objects.
Before applying the label, check the
environmental condition and the
material. Test the label by affixing a
small piece of it to an inconspicuous
area of the intended surface.
WARNING
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-Touch QL 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-Touch QL 500 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother P-Touch QL 500

Brother P-Touch QL 500 User Manual - German - 69 pages

Brother P-Touch QL 500 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info