579450
4
Zoom out
Zoom in
Previous page
1/4
Next page
For Windows
®
7
1. Turn off the P-touch labeler.
2. From the Start menu, click [Devices and Printers].
3. Select [Brother PT-P700] and click [Remove device], or right-click the icon and click
[Remove device].
If a User Account Control message appears, type in the password, and then click [Yes].
4. Select [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window,
and then click [Print server properties], which appeared on the menu bar.
5. Click the [Drivers] tab, and then click [Change Driver Settings]. If a User Account Control
message appears, type in the password, and then click [Yes]. Select [Brother PT-P700],
and then click [Remove...].
6. Select [Remove driver and driver package], and then click [OK]. Follow the on-screen
instructions.
7. Close the [Print Server Properties] window. The printer driver has been uninstalled.
For Windows
®
8
1. Turn off the P-touch labeler.
2. Click [Control Panel] on the [Apps] screen - [Hardware and Sound] - [Devices and
Printers].
3. Select [Brother PT-P700] and click [Remove device], or right-click the icon and click
[Remove device].
If a User Account Control message appears, type in the password, and then click [Yes].
4. Select [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window,
and then click [Print server properties], which appeared in the menu bar.
5. Click the [Drivers] tab, and then click [Change Driver Settings]. If a User Account Control
message appears, type in the password, and then click [Yes]. Select [Brother PT-P700],
and then click [Remove...].
6. Select [Remove driver and driver package], and then click [OK]. Follow the on-screen
instructions.
7. Close the [Print Server Properties] window. The printer driver has been uninstalled.
For Mac OS X v10.6.8 - v10.8.x
1. Turn off the P-touch labeler.
2. Click [Apple menu] - [System Preferences], and click [Print & Fax] (OS X v10.6.8) /
[Print & Scan] (OS X v10.7.x/v10.8.x).
3. Choose [Brother PT-P700], and click [-].
4. Close the [Print & Fax] (OS X v10.6.8) / [Print & Scan] (OS X v10.7.x/v10.8.x) window.
The printer driver has been uninstalled.
Uninstalling the software
Perform this procedure only if the software is no longer necessary or when re-installing the
software.
To uninstall the software, follow the usual steps for your operating system.
10
Definition of the Status Lamp
The Status lamp on the P-touch labeler indicates the current operating condition.
11
Troubleshooting
12
Specifications
*1
Not included.
*2
Visit us at http://solutions.brother.com/ for the latest information about the recommended
batteries.
Please see the Brother Solutions Center (http://solutions.brother.com/
) for the latest compatible
OS.
Lamp Condition
Not lit
Power is OFF.
Green lamp is lit
Power is ON.
Green lamp is flashing
Receiving data from the computer.
Transferring data.
Orange lamp is lit
The cassette cover is open. Close the cassette cover correctly.
Starting the reset procedure, or the Feed & Cut button was
pressed during the reset procedure.
For details on resetting the P-touch labeler, see
Troubleshooting.
Orange lamp is flashing
Cooling (Wait for the temperature to cool down)
Reset in progress. For details on resetting the P-touch labeler,
see Troubleshooting.
Red lamp is lit
The P-touch labeler is booting.
Red lamp is flashing
Indicates one of the following errors.
Red lamp flashes in 0.9 second intervals:
No tape cassette
Incorrect tape cassette installed
Incompatible tape cassette installed
The cassette cover was opened during printing
Transmission error
Overheating error
Cutter error
Red lamp flashes in 0.3 second intervals:
•System error
Problem Solution
After exiting P-touch Editor
Lite, how do I restart the
program while the P-touch
labeler is still on?
There are three ways to restart. Perform any of the following.
Turn off the P-touch labeler and then turn it back on.
Disconnect and then reconnect the USB cable while the
P-touch labeler is on.
(For Windows
®
)
Launch P-touch Editor Lite from [My Computer].
I cannot turn the P-touch
labeler on.
Check to see that the batteries are installed correctly, or that
the included power adapter is securely connected.
I cannot exit P-touch Editor
Lite.
Check to see if an error message is displayed, and try to
resolve it. Please note that the software cannot be exited while
labels are being printed.
A blank horizontal line
appears through the printed
label.
Streaks or poor quality characters on printed labels generally
indicate that the print head is dirty. Clean the print head using
a cotton swab or optional print head cleaning cassette (TZe-
CL4).
* Do not touch the print head directly with your bare hands.
The label is difficult to cut. Clean the cutter blade using a cotton swab moistened with
alcohol.
* Do not touch the cutter blade directly with your bare hands.
When the label is printed out,
there is too much margin
(space) on both sides of the
text.
When margins are set to [Large], labels print with approx. 1"
(25 mm) margins on each side of the printed text. Reduce this
margin by changing the setting to [Small].
On P-touch Editor Lite, right-click the mouse and select
[Margins] from the displayed menu. Change the setting to
[Small].
The P-touch labeler does not
print, or the printed
characters are not formed
properly.
Check that the tape cassette has been inserted correctly.
If the tape cassette is empty, replace it.
Check the cassette cover is properly closed.
The power turns off when you
try to print.
The batteries may be weak. Replace them.
Check that the batteries are correctly inserted.
An incorrect adaptor is being used; the recommended
adapter is the AD-E001.
The tape does not feed
properly, or the tape gets
stuck inside the P-touch
labeler.
Check that the end of the tape feeds under the tape guides.
The Feed & Cut button was used while printing. Do not touch
the Feed & Cut button during printing.
I want to reset the P-touch
labeler.
With the P-touch labeler off, press and hold the Feed & Cut
button while holding down the Power button. When the Editor
Lite lamp starts flashing and the Status lamp lights orange,
press the Feed & Cut button six times while continuing to hold
down the Power button. The P-touch labeler will be reset to the
factory settings.
Product Specifications
Dimensions (W × D × H) Approximately 3.1" (W) × 6.0" (D) × 5.6" (H)
(78 mm (W) × 152 mm (D) × 143 mm (H))
Weight Approximately 1.6 lb (710 g) (without batteries and tape
cassette)
Power supply AC adapter (AD-E001)
Six "AA" alkaline batteries (LR6)
*1
Six "AA" Ni-MH rechargeable batteries (HR6)
*1
*2
Accessories
Tape cassette Brother TZe tape (width)
0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm),
0.70" (18 mm), 0.94" (24 mm)
AC Adapter AD-E001
System Requirements
Windows
®
Macintosh
Operating System
Windows Vista
®
/
Windows
®
7/Windows
®
8
Mac OS X
v10.6.8/v10.7.x/v10.8.x
Hard-Disk Free Space 70 MB or more 500 MB or more
Memory
Windows Vista
®
: 512 MB or
more
Windows
®
7/Windows
®
8:
1 GB (32-bit) or 2 GB (64-bit)
or more
2 GB or more
Display SVGA/High Color or more More than 256 colors
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-Touch P700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-Touch P700 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother P-Touch P700

Brother P-Touch P700 User Manual - German - 4 pages

Brother P-Touch P700 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info