508436
46
Zoom out
Zoom in
Previous page
1/57
Next page
44
Troubleshooting
For printer troubleshooting, refer to the following list of possible problems.
Q & A
Problem Solution
The printer does not print.
A printing error is received.
Check that the interface cable is connected correctly, the tape
cassette is installed correctly, and the tape compartment
cover is closed.
While printing, striped tape appears.
The tape cassette is empty.
Refer to “Installing the tape cassette” ( P. 15) and install
a new tape cassette.
There is about 1” of blank space at the
leading edge of each printed label.
Most TZe labels have a clear laminate top layer. This
durable laminate helps the label withstand abrasion, fading
and wet conditions providing a crisp, readable image. The
process of
adding this laminate layer results in the leading
edge of blank space. Adjusting the label’s margin or using
the chain printing feature may reduce the amount of blank
space.
The power button does not light up or
flash.
Check that the main power switch on the back of printer
is
on.
Check that the power supply and adapter cord is connected
correctly. If the power button still does not light up or flash,
contact the retail outlet where the printer was purchased or
your local authorised service center.
The printed label contains a blank
horizontal line.
There may be some dust on the print head.
Refer to “Maintenance” ( P. 43) and clean the print head
and head roller.
After the labels are cut, they are not
ejected from the printer correctly.
The cutter blade may be dirty.
Refer to “Maintenance” ( P. 43) and clean the cutter.
A data transmission error appears on
the computer.
The wrong port may be selected.
For Windows
®
, select the correct port from the “Print to
the following port” list in the printer Properties dialog box.
For a USB connection, select “USB00n”.
Is someone printing via network?
If you try to print while other users are printing large
amounts of data, the printer is unable to accept your print
job until the ongoing printing is finished. In such situations,
restart the print job after the other jobs are completed.
The baud rates for the computer and the printer may not
be the same. Refer to
“Setting the computer baud rate”
( P. 42) and change the baud rate.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-touch 9800PCN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-touch 9800PCN in the language / languages: English as an attachment in your email.

The manual is 8,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother P-touch 9800PCN

Brother P-touch 9800PCN User Manual - English, German, Dutch - 58 pages

Brother P-touch 9800PCN User Manual - Dutch - 59 pages

Brother P-touch 9800PCN User Manual - French, Italian, Spanish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info