508432
77
Zoom out
Zoom in
Previous page
1/84
Next page
1
2
3
4
5
6
7
8
9
73
What to do when...
z TROUBLESHOOTING
TROUBLESHOOTING
What to do when...
Problem Solution
The screen ‘locks’, or
the P-touch does not
respond normally.
Refer to “Resetting the P-touch” on page 71 and reset the
internal memory to the initial settings. If resetting the P-touch
does not solve the problem, disconnect the AC adapter and
remove the batteries for more than 10 minutes.
The display remains
blank after turning on
the power.
Check that the batteries are correctly installed and that the
AC adapter designed exclusively for your P-touch
(provided) is correctly connected.
The LCD messages
are displayed in a
foreign language.
Refer to “Setting Language and Unit” on page 22 to select
your desired language.
The label is not
printed after pressing
the Print key.
Check that text has been entered and that the tape
cassette is installed correctly with sufficient tape
remaining.
If the tape is bent, cut off the bent section and thread the
tape through the tape exit slot.
If the tape is jammed, remove the tape cassette and then
pull out the jammed tape and cut it. Check that the end of
the tape passes through the tape guide before reinstalling
the tape cassette.
The label is not
printed correctly.
Remove the tape cassette and reinstall it, pressing it firmly
until it clicks into place.
If the print head is dirty, clean it with a cotton swab or
optional print head cleaning cassette (TZe-CL4).
Check that the Cut Option setting is not set to Chain or No
Cut, as the tape will not be fed after printing the label.
Alternatively, hold down the
Shift
key and press the
Preview
key to feed and cut the tape.
The ink ribbon is
separated from the
ink roller.
If the ink ribbon is broken, replace the tape cassette. If not,
leave the tape uncut and remove the tape cassette, then
wind the loose ink ribbon onto the spool as shown in the
figure.
Spool
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-touch 2730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-touch 2730 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother P-touch 2730

Brother P-touch 2730 User Manual - German - 84 pages

Brother P-touch 2730 User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info