537205
101
Zoom out
Zoom in
Previous page
1/130
Next page
94
To feed and cut off 1” (24 mm) of TZ tape:
Hold down c and press r once. 1” (24 mm) of tape is fed out and cut off.
This function can be used to print many copies of the same text while increasing certain char-
acters (letters, numbers or barcode data) after each label is printed. This type of automatic
incrementation is very useful when printing serial number labels, production control labels or
other labels requiring ascending codes.
Letters and numbers increase as shown below:
0 1 ...9 0 ...
A B ...Z A ...
a b ...z a ...
A0 A1 ...A9 B0 ...
Spaces (shown as underlines “_” in the examples below) can be used to adjust the spacing
between characters or to control the number of digits that are printed:
_9 10 ...99 _0 ...
_Z AA ...ZZ _A ...
1_9 2_0 ...9_9 __0 ...
Only one numbering field can be selected from any text.
If you include a non-alphanumeric character such as a symbol in the numbering field, only the
letters and numbers in the numbering field will be increased when the labels are printed, or
just one label will be printed if the field only contains a non-alphanumeric character.
To use the Numbering function:
1 Hold down c and press O. The message “START?” appears in the display.
To cancel the Numbering function at any time, hold down c and press O (or
press just * ).
2 Press f, w, e or h until the first character that you wish to select for the num-
bering field is flashing.
The last number to be printed can also be selected by pressing e or h.
A number lower than the one that was selected cannot be entered.
3 Press _. The message “END?” appears in the display.
If a barcode was selected, “NUMBER” appears in the display instead. Skip to step
6 to continue printing with the Numbering function.
4 Press f, w, e or h until all of the characters that you wish to select for the num-
ber field are flashing.
A barcode cannot be selected in addition to other characters.
5 Press _. The message “NUMBER” appears in the display.
TZ-Tape
AV-Label
NUMBERING FUNCTION
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-touch 2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-touch 2600 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info