463656
141
Zoom out
Zoom in
Previous page
1/164
Next page
CARE AND MAINTENANCE
Appendix
139
6
i
Insert the bobbin case so that the mark
aligns with the mark as shown below.
a mark
b mark
* Align the and marks.
j
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover
back into place.
a Needle plate cover
b Tabs
Cleaning the Bobbin Case
Thread wax and dust easily collect around the notch in
the tension spring on the bobbin case, resulting in an
incorrect thread tension. Therefore, the bobbin case
should be cleaned as necessary should tension
problems arise.
When cleaning the bobbin case, use business card
stock or another type of paper of similar thickness and
sturdiness in order to prevent pieces of paper tearing off
and getting lodged in the bobbin case.
a
Follow steps from “Cleaning the Race” on
page 138 to remove the bobbin case.
b
Using a piece of paper of adequate thickness
and sturdiness, slide the paper between the
tension plate base and the tension spring and
also slide the paper behind the notch of the
spring to remove any dirt or dust.
a Tension plate base
b Notch
c Paper (e.g. business card type)
d Tension spring
e Bobbin case projection (stopper)
c
Use the included cleaning brush to remove
any lint and dust from inside the bobbin case.
d
Reinsert the bobbin case and needle plate
cover assuring the bobbin case projection
(stopper) is touching the bracket spring.
Never use a bobbin case that is scratched;
otherwise, the upper thread may become tangled,
the needle may break, or sewing performance may
suffer.
For a new bobbin case (part code: XC3153-351
(black), part code: SABWRK1/BWRK1 (gray)),
contact your nearest authorized dealer.
Be sure that the bobbin case is correctly installed.
Otherwise, the needle may break.
a
b
b
a
a
b
Do not bend the tension spring. In addition, do not use
anything other than recommended paper to clean the
bobbin case.
c
b
a
d
a
d
e
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother NX-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother NX-2000 in the language / languages: English as an attachment in your email.

The manual is 10,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother NX-2000

Brother NX-2000 User Manual - German - 164 pages

Brother NX-2000 User Manual - Dutch - 164 pages

Brother NX-2000 User Manual - French - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info