558979
82
Zoom out
Zoom in
Previous page
1/219
Next page
Chapter 7
68
Connections 7
The external TAD must be plugged into the
jack labeled EXT. Your machine cannot work
correctly if you plug the TAD into a wall jack
(unless you are using Distinctive Ring).
aUsing both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
bPlug the telephone line cord from the
telephone wall jack into the jack labeled
LINE.
cRemove the protective cap (1) from the
jack labeled EXT., and then plug the
telephone line cord from the external
TAD into the EXT. jack. (Make sure this
cord is connected to the TAD at the
TAD's telephone line jack, and not its
handset jack.)
dCarefully guide the telephone line cord
into the cable channel and out the back
of the machine.
eLift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
fSet your external TAD to four rings or
fewer. (The machine's Ring Delay
setting does not apply.)
gRecord the outgoing message on your
external TAD.
hSet the TAD to answer calls.
iSet the Receive Mode to
External TAD. (See Choose the
correct Receive Mode on page 52.)
Recording an outgoing
message (OGM) on the
external TAD 7
Timing is important in recording this
message. The way you record this message
will affect both manual and automatic fax
reception.
aRecord 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
bLimit your speaking to 20 seconds.
cEnd your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
“After the beep, leave a message or
send a fax by pressing l51 and Start.”
NOTE
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
1
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-J6720DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-J6720DW in the language / languages: English as an attachment in your email.

The manual is 26,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-J6720DW

Brother MFC-J6720DW User Manual - English - 94 pages

Brother MFC-J6720DW Installation Guide - English - 46 pages

Brother MFC-J6720DW User Manual - German - 105 pages

Brother MFC-J6720DW Installation Guide - German - 46 pages

Brother MFC-J6720DW User Manual - German - 218 pages

Brother MFC-J6720DW User Manual - Dutch - 101 pages

Brother MFC-J6720DW Installation Guide - Dutch - 44 pages

Brother MFC-J6720DW User Manual - Dutch - 215 pages

Brother MFC-J6720DW Installation Guide - French - 46 pages

Brother MFC-J6720DW User Manual - French - 219 pages

Brother MFC-J6720DW User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info