558969
71
Zoom out
Zoom in
Previous page
1/91
Next page
Printing photos from a memory card or USB Flash memory drive
65
8
NOTE
Auto Crop is available for paper with
right angles of 90 degrees at all four
corners. If one of the angles is not square,
Auto Crop cannot detect the document.
If your document is too long or wide, this
setting does not work correctly. The
document has to meet the following
specification: up to 195 270 mm.
If the ratio between the height and width of
the document is more than 1 to 8, this
setting does not work correctly.
You must place the documents away from
the edges of the scanner glass as shown
in the illustration.
You must place the documents at least
10 mm apart from each other.
Auto Crop adjusts the skew of the
document on the scanner glass, but if your
document is skewed more than
10 degrees, this setting will not work.
The ADF must be empty to use the
Auto Crop.
The Auto Crop feature is available for up
to a maximum of 16 documents
depending on the size of your documents.
(MFC-J4710DW)
2-sided Scan and Skip Blank Page
are not available with Auto Crop.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while the
machine is reading or writing to the
memory card or USB Flash memory drive
to avoid damaging the card, USB Flash
memory drive, or the data stored on them.
How to set a new default 8
You can save the Scan to Media settings
(Scan Type, Resolution, File Type,
Auto Crop, Skip Blank Page
1
and
Remove Background Colour) you use
most often by setting them as the default
settings. These settings will remain until you
change them again.
1
(For MFC-J4710DW)
a Open the media slot cover.
b Put the memory card or USB Flash
memory drive in the correct slot.
c Press Scan to Media.
d Press Options.
e Swipe up or down, or press a or b to
display Scan Type, Resolution,
File Type, Auto Crop,
Skip Blank Page
1
or
Remove Background Colour, and
then press the setting you want to
change. Then press the option you want
to change.
1
(For MFC-J4710DW)
Repeat this step for each setting you
want to change.
f After you are finished choosing your
preferred settings, swipe up or down, or
press a or b to display
Set New Default.
g Press Set New Default.
h The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
i Press .
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-J4710DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-J4710DW in the language / languages: English as an attachment in your email.

The manual is 10,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-J4710DW

Brother MFC-J4710DW Installation Guide - English - 44 pages

Brother MFC-J4710DW User Manual - English - 203 pages

Brother MFC-J4710DW Installation Guide - German - 44 pages

Brother MFC-J4710DW User Manual - German - 105 pages

Brother MFC-J4710DW User Manual - German - 213 pages

Brother MFC-J4710DW Installation Guide - Dutch - 44 pages

Brother MFC-J4710DW User Manual - Dutch - 101 pages

Brother MFC-J4710DW User Manual - Dutch - 213 pages

Brother MFC-J4710DW Installation Guide - French - 44 pages

Brother MFC-J4710DW User Manual - French - 103 pages

Brother MFC-J4710DW User Manual - French - 213 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info