558972
97
Zoom out
Zoom in
Previous page
1/139
Next page
Troubleshooting
89
B
Transmission Verification Report
shows RESULT:ERROR.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and see RESULT:ERROR on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can print fax messages from the machine’s memory. (See Advanced User’s
Guide: Printing a fax from the memory.) If the problem continues, ask the
telephone company to check your telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the machine's Compatibility setting to Basic(for VoIP).
(See Telephone line interference / VoIP on page 92.)
If you connect your machine to PBX or ISDN, set the menu setting of Telephone
Line Type to your telephone line type. (See Setting the Telephone Line Type
on page 33.)
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 58.)
Handling Incoming Calls
Difficulty Suggestions
The machine “hears” a voice as a
CNG Tone.
If Fax Detect is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax-receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Fax Detect to Off.
(See Fax Detect on page 31.)
Sending a fax call to the machine. If you answered on an extension or external telephone, press your Remote
Activation Code (the factory default is l 51). If you answered on an external
telephone, press Mono Start or Colour Start, and press 2 to receive the fax.
When your machine answers, hang up.
Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, Caller ID, Voice Mail, an
answering machine, an alarm system or other custom feature on a single
telephone line with your machine, it may create a problem sending or receiving
faxes.
For example: If you subscribe to Call Waiting or another custom service and its
signal comes through the line while your machine is sending or receiving a fax, the
signal can temporarily interrupt the faxes. Brother's ECM (Error Correction Mode)
feature should help overcome this problem. This condition is related to the
telephone system industry and is common to all devices that send and receive
information on a single, shared line with custom features. If avoiding a slight
interruption is crucial to your business, we recommend using a separate
telephone line with no custom features.
Copying Difficulties
Difficulty Suggestions
Vertical black lines or streaks
appear in copies.
Black vertical lines on copies are typically caused by dirt or correction fluid on the
glass strip. Clean the glass strip, scanner glass, white bar and white plastic above
them. (See Cleaning the scanner glass on page 58.)
Poor copy results when using the
ADF.
Try using the scanner glass. (See Using the scanner glass on page 22.)
Fit to Page does not work correctly. Make sure your source document is not skewed.
Reposition the document and try again.
Sending Faxes (continued)
Difficulty Suggestions
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-J470DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-J470DW in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-J470DW

Brother MFC-J470DW User Manual - English - 48 pages

Brother MFC-J470DW Installation Guide - English - 34 pages

Brother MFC-J470DW Installation Guide - German - 35 pages

Brother MFC-J470DW User Manual - German - 54 pages

Brother MFC-J470DW User Manual - Dutch - 52 pages

Brother MFC-J470DW Installation Guide - Dutch - 34 pages

Brother MFC-J470DW User Manual - Dutch - 139 pages

Brother MFC-J470DW Installation Guide - French - 35 pages

Brother MFC-J470DW User Manual - French - 52 pages

Brother MFC-J470DW User Manual - French - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info