558972
44
Zoom out
Zoom in
Previous page
1/139
Next page
Chapter 6
36
Connection settings 6
The external TAD must be connected as
shown in the previous illustration.
a Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
b Carefully guide the telephone line cord
into the cable channel and out the back
of the machine.
c Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
d Set your external TAD to one or two
rings. (The machine's Ring Delay setting
does not apply.)
e Record the outgoing message on your
external TAD.
f Set the TAD to answer calls.
g Set the Receive Mode to
External TAD. (See Choose the
Receive Mode on page 27.)
Recording an outgoing
message (OGM) on an
external TAD 6
Timing is important in recording this
message.
a Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b Limit your speaking to 20 seconds.
NOTE
We recommend beginning your OGM with
an initial 5 second silence because the
machine may not hear the fax tones over
a voice. You may try omitting this pause,
but if your machine has trouble receiving,
then you must re-record the OGM to
include it.
Multi-line connections (PBX) 6
We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi-line system, we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator, we recommend that
you set the Receive Mode to Manual.
We cannot guarantee that your machine will
operate correctly under all circumstances
when connected to a PBX. Any difficulties
with sending or receiving faxes should be
reported first to the company who handles
your PBX.
NOTE
Make sure the Telephone Line Type is set
to PBX. (See Setting the Telephone Line
Type on page 33.)
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-J470DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-J470DW in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-J470DW

Brother MFC-J470DW User Manual - English - 48 pages

Brother MFC-J470DW Installation Guide - English - 34 pages

Brother MFC-J470DW Installation Guide - German - 35 pages

Brother MFC-J470DW User Manual - German - 54 pages

Brother MFC-J470DW User Manual - Dutch - 52 pages

Brother MFC-J470DW Installation Guide - Dutch - 34 pages

Brother MFC-J470DW User Manual - Dutch - 139 pages

Brother MFC-J470DW Installation Guide - French - 35 pages

Brother MFC-J470DW User Manual - French - 52 pages

Brother MFC-J470DW User Manual - French - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info