681757
27
Zoom out
Zoom in
Previous page
1/42
Next page
27
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
Manual setup from the control panel using the Setup Wizard
(Windows
®
, Macintosh and mobile devices)
17
Set up the wireless
settings
a On your machine, press .
Press Setup Wizard.
b When Enable WLAN? is displayed, press
Yes. This will start the wireless setup wizard.
c The machine will search for available SSIDs. It
will take a few minutes to display a list of
available SSIDs.
If a list of SSIDs is displayed, swipe up or down,
or press a or b to choose the SSID you wrote
down in step 16-b on page 23.
Press OK.
d Do one of the following:
If the wireless access point/router of the
selected SSID supports WPS and the
machine asks to use WPS, go to e.
If you are using an authentication and
encryption method that requires a Network
Key, go to f.
If your authentication method is Open
System and your encryption mode is None,
go to g.
e To connect your machine using the automatic
wireless mode, press Yes. (If you choose
No (Manual), go to f to enter the Network
Key.) When the Touchscreen instructs you to
start WPS, press the WPS button on your
wireless access point/router, and then press
Next on the Touchscreen. Go to g.
f Enter the Network Key you wrote down in step
16-b on page 23 using the numbers and
characters on the Touchscreen.
Press OK when you have entered all the
characters, and then press Yes to apply your
settings.
g Your machine will now try to connect to your
wireless network using the information you
have entered.
A connection result message appears on the
Touchscreen and a WLAN report will
automatically print.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
uu page 30.
Press OK.
IMPORTANT
You must have the wireless settings you wrote
down for your network in step 16-b on page 23
before you proceed.
NOTE
If you use your machine in an IEEE 802.1x
supported wireless network: uu Network User's
Guide: Using IEEE 802.1x authentication.
NOTE
If the list is blank, check that the wireless access
point/router has power and is broadcasting the
SSID. Move your machine closer to the wireless
access point/router and try starting from a
again.
If your wireless access point/router is set to not
broadcast the SSID you will have to manually
add the SSID name. For details: uu Network
User's Guide: Configuring your machine when
the SSID is not broadcast.
NOTE
To enter numbers or special characters, press
repeatedly until the character you want to
enter appears, then press the character you
want.
If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, then press .
To enter a space, press Space.
For more details, see Entering Text uu
page 33.
Wireless setup is now complete.
A four-level indicator at the top right of
your machine’s Touchscreen will show
the wireless signal strength of your
wireless access point/router.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-9342CDW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-9342CDW in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-9342CDW

Brother MFC-9342CDW User Manual - English - 75 pages

Brother MFC-9342CDW User Manual - English - 234 pages

Brother MFC-9342CDW Installation Guide - German - 44 pages

Brother MFC-9342CDW User Manual - German - 78 pages

Brother MFC-9342CDW User Manual - German - 259 pages

Brother MFC-9342CDW Installation Guide - Dutch - 44 pages

Brother MFC-9342CDW User Manual - Dutch - 80 pages

Brother MFC-9342CDW User Manual - Dutch - 252 pages

Brother MFC-9342CDW Installation Guide - French - 44 pages

Brother MFC-9342CDW User Manual - French - 79 pages

Brother MFC-9342CDW User Manual - French - 256 pages

Brother MFC-9342CDW Additional guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info