481052
32
Zoom out
Zoom in
Previous page
1/246
Next page
Chapter 2
20
Envelopes 2
Most envelopes will be suitable for your
machine. However, some envelopes may
have feed and print-quality problems
because of the way they have been made. A
suitable envelope should have edges with
straight, well-creased folds and the leading
edge should not be thicker than two sheets of
paper. The envelope should lie flat and not be
of baggy or flimsy construction. You should
buy quality envelopes from a supplier who
understands that you will be using the
envelopes in a laser machine.
Envelopes can only be fed from the Manual
feed slot. We recommend that you print a test
envelope to make sure the print results are
what you want before you print or purchase a
large quantity of envelopes.
Check the following:
Envelopes should have a lengthwise
sealing flap.
The sealing flaps should be folded crisply
and correctly (irregularly cut or folded
envelopes may cause paper jams).
Envelopes should consist of two layers of
paper in the area circled in the figure
below.
1 Feeding direction
Envelope joints that are sealed by the
manufacturer should be secure.
We recommend that you do not print
within 15 mm of the edges of envelopes.
Types of envelopes to avoid 2
IMPORTANT
DO NOT use envelopes:
that are damaged, curled, wrinkled or
an unusual shape
that are extremely shiny or textured
with clasps, staples, snaps or tie
strings
with self-adhesive closures
that are of a baggy construction
that are not sharply creased
that are embossed (have raised writing
on them)
that were previously printed by a
laser/LED machine
that are pre-printed on the inside
that cannot be arranged neatly when
stacked
that are made of paper that weighs
more than the paper weight
specifications for the machine
with edges that are not straight or
consistently square
with windows, holes, cut-outs or
perforations
with glue on surface as shown in figure
below
with double flaps as shown in figure
below
1
1
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-9120CN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-9120CN in the language / languages: English as an attachment in your email.

The manual is 17,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-9120CN

Brother MFC-9120CN Installation Guide - English - 31 pages

Brother MFC-9120CN Installation Guide - German - 31 pages

Brother MFC-9120CN User Manual - German - 250 pages

Brother MFC-9120CN User Manual - Dutch - 243 pages

Brother MFC-9120CN Installation Guide - Dutch - 31 pages

Brother MFC-9120CN Installation Guide - Dutch - 221 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info