451214
44
Zoom out
Zoom in
Previous page
1/55
Next page
Installing the Driver & Software
42
STEP2
Macintosh
®
Macintosh
®
Wireless
Network
Using the SecureEasySetup™ software to configure your machine for a
wireless network
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4 through 15.
The SecureEasySetup™ software allows you to
configure the wireless network easier than
configuring it manually. By pushing a button on the
wireless router or access point, you can complete
setup and secure the wireless network. Your router or
access point must also support SecureEasySetup™.
See the user’s guide for your wireless LAN router or
access point for instructions to configure your
machine for a wireless network. If your wireless router
or access point does not support SecureEasySetup™
go to page 43 for installation instructions.
Note
Routers or access points that support
SecureEasySetup™ have the
SecureEasySetup™ symbol as shown below.
Note
Make sure that the machine is turned on by
connecting the power cord.
Improper Setup
If you have previously configured the wireless
settings of the machine you must reset the
network (LAN) settings before you can
configure the wireless settings again.
On your machine, press Menu. Press a or b to
choose LAN and then press OK.
Press a or b to choose Factory Reset, and
then press OK. Press 1 twice for Yes to accept
the change.
1 Place the Brother machine close to the
SecureEasySetup™ router or access point
(less than 5 m/16 feet).
2 Push the SecureEasySetup™ button on your
wireless router or access point. See the user’s
guide for your wireless router or access point
for instructions.
3 On your machine, press Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Network I/F and
press OK.
Press a or b to choose WLAN and press OK.
The wired network interface will become
inactive with this setting.
It will take about a minute for the LAN menu on
the LCD to become available again.
Press Stop/Exit.
4 When the LAN menu becomes available, press
Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Setup WLAN and
press OK.
Press a or b to choose SecureEasySetup
and press OK.
5 The wireless network connection status using
the SecureEasySetup™ software will be
displayed: Connecting WLAN, Connected
or Connection Error.
Connecting WLAN is displayed when the
print server is trying to make connections to
your router or access point. Wait till either
Connected or Connection Error is
displayed.
Connected is displayed when the print server
is successfully connected to your router or
access point. You can now use your machine
in a wireless network.
Connection Error is displayed when the
print server has not successfully connected to
your router or access point. Try starting from
step 1 again. If the same message is displayed
again, reset the print server back to the default
factory settings and try again.
(See Restoring the network settings to factory
default on page 49.)
Wireless setup is now complete. To install
the MFL-Pro suite, continue to step 12 on
page 45.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-845CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-845CW in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-845CW

Brother MFC-845CW User Manual - English - 201 pages

Brother MFC-845CW Installation Guide - German - 57 pages

Brother MFC-845CW User Manual - German - 211 pages

Brother MFC-845CW Installation Guide - Dutch - 55 pages

Brother MFC-845CW User Manual - Dutch - 210 pages

Brother MFC-845CW Installation Guide - French - 55 pages

Brother MFC-845CW User Manual - French - 213 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info