451232
35
Zoom out
Zoom in
Previous page
1/226
Next page
23
3
3
Power Save mode 3
You can put the machine into Power Save
mode by pressing the Power Save key. You
can still receive telephone calls in Power
Save mode (MFC-790CW only). For further
information on receiving faxes in the Power
Save condition, please see the table on
page 24. The delayed faxes that have been
set up will be sent. You can even retrieve
faxes using Remote Retrieval if you are away
from your machine. If you want to do other
operations, you must take the machine out of
Power Save mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode 3
a Press the Power Save key. The LCD
will tell you that you cannot use the
phone once it is switched off.
Press Yes.
The LCD shows
Shutting Down
and will
stay on for a few seconds before going off.
Bringing your machine out of
Power Save mode 3
a Press the Power Save key.
The LCD shows the date and time.
Note
Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
If you unplug the AC power cord, no
machine operations will be available.
You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 23.)
Power Save setting 3
You can customize the machine's
Power Save key. The factory setting is
Fax Receive:On. Your machine can
receive faxes (or calls for MFC-790CW only)
even when the machine is in Power Save
mode. If you do not want your machine to
receive faxes (or calls for MFC-790CW only),
turn this setting to Fax Receive:Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
P.Save Setting.
e Press P.Save Setting.
f Press Fax Receive:Off or
Fax Receive:On.
(MFC-790CW) Go to step h.
(MFC-990CW) If you choose
Fax Receive:On, go to step g.
If you choose Fax Receive:Off,
go to step h.
g Press Ring Tone:On.
Make sure you set the Ring Volume to
Low, Med or High. (See Ring Volume
on page 26.)
h Press Stop/Exit.
Note
If you choose Ring Tone:Off, the
machine will not ring when you receive a
call.
General setup 3
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-790CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-790CW in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-790CW

Brother MFC-790CW Installation Guide - English - 47 pages

Brother MFC-790CW Installation Guide - German - 47 pages

Brother MFC-790CW User Manual - German - 234 pages

Brother MFC-790CW Installation Guide - Dutch - 47 pages

Brother MFC-790CW User Manual - Dutch - 235 pages

Brother MFC-790CW Installation Guide - French - 47 pages

Brother MFC-790CW User Manual - French - 235 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info