451225
23
Zoom out
Zoom in
Previous page
1/231
Next page
USER’S GUIDE
MFC-5890CN
MFC-5895CW
MFC-6490CW
Version 0
UK/IRE/GEN/SAF
If you need to call Customer Service
Please complete the following information for future
reference:
Model Number: MFC-5890CN, MFC-5895CW and
MFC-6490CW (Circle your model number)
Serial Number:
1
Date of Purchase:
Place of Purchase:
1
The serial number is on the back of the unit. Retain
this User's Guide with your sales receipt as a
permanent record of your purchase, in the event of
theft, fire or warranty service.
Register your product on-line at
http://www.brother.com/registration/
© 2008-2010 Brother Industries, Ltd.
i
Approval Information and Compilation and
Publication Notice
THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE
FITTED WITH THE APPROPRIATE CONNECTOR.
APPROVAL INFORMATION
Brother advises that this product may not function correctly in a country other than where it was
originally purchased, and does not offer any warranty in the event that this product is used on
public telecommunication lines in another country.
Compilation and Publication Notice
Under the supervision of Brother Industries Ltd., this manual has been compiled and published,
covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
Declaration of Conformity (Europe only)
Brother declares that this product is in compliance with the essential requirements of Directives
1999/5/EC and 2005/32/EC.
The Declaration of Conformity (DoC) in the User's Guides and/or Quick Setup Guides may be an
earlier version. For the latest version please refer to our web site.
Please go to http://solutions.brother.com/
-> choose region (eg. Europe)
-> choose country
-> choose your model
-> choose "Manuals"
-> choose Declaration of Conformity (Select Language when required.)
ii
Table of Contents
Section I General
1 General Information 2
Using the documentation.......................................................................................2
Symbols and conventions used in the documentation ....................................2
Accessing the Software User’s Guide and Network User’s Guide ........................3
Viewing Documentation...................................................................................3
Accessing Brother Support (For Windows
®
) .........................................................5
MFC-6490CW Control panel overview ..................................................................6
LCD screen indications....................................................................................8
Basic Operations .............................................................................................8
2 Loading paper and documents 9
Loading paper and other print media.....................................................................9
Loading paper in paper tray #1........................................................................9
Loading paper in paper tray #2 (MFC-6490CW only)....................................12
Loading envelopes and postcards.................................................................15
Removing small printouts from the machine .................................................16
Printable area ................................................................................................17
Acceptable paper and other print media..............................................................18
Recommended print media ...........................................................................18
Handling and using print media.....................................................................19
Choosing the right print media.......................................................................20
Loading documents .............................................................................................22
Using the ADF ...............................................................................................22
Using the scanner glass ................................................................................23
Scannable area .............................................................................................24
3 General setup 25
Power Save mode ...............................................................................................25
Putting your machine in Power Save mode...................................................25
Bringing your machine out of Power Save mode ..........................................25
Power Save setting........................................................................................25
Mode Timer..........................................................................................................26
Paper settings......................................................................................................26
Paper Size and Type (MFC-5890CN and MFC-5895CW) ............................26
Paper Size and Type (MFC-6490CW only) ...................................................27
Tray use in Copy mode (MFC-6490CW only) ...............................................28
Tray use in Fax mode (MFC-6490CW only)..................................................28
Secure Paper Feed mode for A3 size Short Grain Paper .............................29
Volume Settings...................................................................................................29
Ring Volume ..................................................................................................29
Beeper Volume..............................................................................................30
Speaker Volume............................................................................................30
Automatic Daylight Savings Time ........................................................................30
iii
Sleep Mode ......................................................................................................... 31
LCD screen..........................................................................................................31
LCD Contrast.................................................................................................31
Setting the backlight brightness.....................................................................31
Setting the Dim Timer for the backlight ........................................................32
Setting the Wallpaper ....................................................................................32
4 Security features 33
Secure Function Lock ..........................................................................................33
Setting and changing the Administrator Password........................................33
Setting up and changing the Public user .......................................................34
Setting up and changing restricted users ......................................................35
Turning Secure Function Lock on/off.............................................................36
Switching users .............................................................................................37
Changing to the Public mode ........................................................................37
Reset all users...............................................................................................37
Section II Fax
5 Sending a Fax 40
Entering Fax mode ..............................................................................................40
Faxing from the ADF ....................................................................................40
Faxing from the scanner glass ......................................................................41
Setting scanner glass size for faxing (MFC-5890CN and MFC-5895CW) ....41
Setting scanner glass size for faxing (MFC-6490CW only)...........................42
Colour fax transmission .................................................................................42
How to preview an outgoing fax ....................................................................42
Cancelling a fax in progress ..........................................................................42
Broadcasting (Monochrome only)........................................................................43
Cancelling a Broadcast in progress...............................................................44
Additional sending operations..............................................................................44
Sending faxes using multiple settings ...........................................................44
Contrast .........................................................................................................45
Changing fax resolution.................................................................................45
Dual access (Monochrome only) ...................................................................46
Real time transmission .................................................................................. 46
Overseas Mode .............................................................................................46
Delayed Faxing (Monochrome only)..............................................................46
Delayed Batch Transmission (Monochrome only).........................................47
Checking and cancelling waiting jobs............................................................47
Setting your changes as a new default..........................................................47
Restoring all settings to the factory settings .................................................. 47
Sending a fax manually .................................................................................48
Out of Memory message ...............................................................................48
iv
6 Receiving a Fax 49
Receive modes....................................................................................................49
Choose the Receive Mode ..................................................................................49
Using receive modes ...........................................................................................50
Fax only .........................................................................................................50
Fax/Tel...........................................................................................................50
Manual...........................................................................................................50
External TAD .................................................................................................50
Receive mode settings ........................................................................................51
Ring Delay .....................................................................................................51
F/T Ring Time (Fax/Tel mode only)...............................................................51
Fax Detect .....................................................................................................52
Additional receiving operations............................................................................52
Printing a reduced incoming fax ....................................................................52
Setting Receiving Priority ..............................................................................53
Printing a fax from the memory .....................................................................54
Out of Paper Reception.................................................................................54
Memory Receive (Monochrome only)..................................................................54
Fax Forwarding..............................................................................................55
Fax Storage...................................................................................................55
PC Fax Receive.............................................................................................56
Changing the destination PC.........................................................................57
Turning off Memory Receive Operations.......................................................57
Changing Memory Receive Operations.........................................................58
Fax Preview (Monochrome only) .........................................................................58
How to preview a received fax.......................................................................58
Changing the settings to turn off Fax Preview...............................................60
Remote Retrieval .................................................................................................60
Setting a Remote Access Code.....................................................................60
Using your Remote Access Code..................................................................61
Remote Fax commands ................................................................................62
Retrieving fax messages ...............................................................................63
Changing your Fax Forwarding number........................................................63
v
7 Telephone and External devices 64
Voice operations..................................................................................................64
Tone or Pulse ................................................................................................64
Fax/Tel mode ................................................................................................64
Fax/Tel mode in Power Save condition ......................................................... 64
Telephone services..............................................................................................65
Caller ID (U.K. and Ireland only)....................................................................65
Setting the Telephone Line Type...................................................................66
BT Call Sign (U.K. only).................................................................................66
Connecting an external TAD (telephone answering device)................................67
Connections...................................................................................................68
Recording outgoing message (OGM) on an external TAD............................68
Multi-line connections (PBX) .........................................................................68
External and extension telephones......................................................................69
Connecting an external or extension telephone ............................................69
Operation from extension telephones............................................................69
Using extension telephones (For U.K. only)..................................................69
Using a cordless external telephone ............................................................. 70
Using remote codes.......................................................................................70
8 Dialling and storing numbers 72
How to Dial .......................................................................................................... 72
Manual dialling...............................................................................................72
One Touch Dialling ........................................................................................72
Speed Dialling ...............................................................................................72
Search ...........................................................................................................73
Fax Redial ..................................................................................................... 73
Outgoing Call history .....................................................................................73
Caller ID history .............................................................................................74
Storing numbers .................................................................................................. 74
Storing a pause .............................................................................................74
Storing One Touch Dial numbers ..................................................................74
Storing Speed Dial numbers..........................................................................76
Changing One Touch or Speed Dial names or numbers...............................78
Setting up groups for broadcasting................................................................79
Combining Quick Dial numbers .....................................................................80
9 Printing Reports 82
Fax reports...........................................................................................................82
Transmission Verification Report...................................................................82
Fax Journal (activity report) ...........................................................................83
Reports ................................................................................................................83
How to print a report ......................................................................................83
vi
10 Polling 84
Polling overview...................................................................................................84
Polling receive .....................................................................................................84
Setup to receive polling .................................................................................84
Setup to receive polling with secure code .....................................................84
Setup to receive delayed polling....................................................................84
Sequential polling (Monochrome only) ..........................................................85
Polled transmit (Monochrome only) .....................................................................86
Setup for polled transmit................................................................................86
Setup for polled transmit with secure code....................................................86
Section III Copy
11 Making copies 88
How to copy .........................................................................................................88
Entering Copy mode......................................................................................88
Making a single copy .....................................................................................88
Making multiple copies ..................................................................................88
Stop copying..................................................................................................88
Copy settings .......................................................................................................89
Changing copy speed and quality .................................................................89
Enlarging or reducing the image copied........................................................89
Making N in 1 copies or a poster (Page Layout) ..........................................90
Sorting copies using the ADF ........................................................................92
Adjusting Brightness and Contrast ................................................................92
Paper Options................................................................................................93
Skew Adjustment (MFC-6490CW only).........................................................94
Book Copy .....................................................................................................94
Watermark Copy............................................................................................95
Setting your changes as a new default..........................................................96
Restoring all settings to the factory settings ..................................................96
‘Out of Memory’ message....................................................................................97
vii
Section IV Direct Photo Printing
12 Printing photos from a memory card or
USB Flash memory drive 100
PhotoCapture Center™ Operations...................................................................100
Printing from a memory card or USB Flash memory drive without a PC.....100
Scanning to a memory card or USB Flash memory drive without a PC ......100
Using PhotoCapture Center™ from your computer.....................................100
Using a memory card or USB Flash memory drive .....................................100
Memory cards or a USB Flash memory drive folder structure.....................101
Getting started ...................................................................................................102
Entering PhotoCapture mode ......................................................................103
Print Images.......................................................................................................103
View Photo(s) ..............................................................................................103
Print Index (Thumbnails) .............................................................................104
Printing Photos ............................................................................................ 105
Enhance Photos ..........................................................................................105
Search by Date............................................................................................108
Print All Photos ............................................................................................108
Slide Show...................................................................................................108
Trimming......................................................................................................109
DPOF printing..............................................................................................109
PhotoCapture Center™ print settings................................................................110
Print Speed and Quality...............................................................................111
Paper options ..............................................................................................111
Adjusting Brightness, Contrast and Colour..................................................112
Cropping ......................................................................................................113
Borderless printing....................................................................................... 113
Date Print.....................................................................................................113
Setting your changes as a new default........................................................114
Restoring all settings to the factory settings ................................................114
Scan to a memory card or USB Flash memory drive ........................................114
Entering Scan mode ....................................................................................114
How to scan to a memory card or USB Flash memory drive.......................114
Glass Scan Size (MFC-6490CW only) ........................................................116
How to change the file name .......................................................................116
How to set a new default .............................................................................116
How to reset to factory settings ...................................................................116
Understanding the Error Messages...................................................................117
13 Printing photos from a camera 118
Printing photos directly from a PictBridge camera.............................................118
PictBridge requirements ..............................................................................118
Setting your digital camera ..........................................................................118
Printing Images............................................................................................119
DPOF printing..............................................................................................119
Printing photos directly from a digital camera (without PictBridge)....................120
Printing Images............................................................................................120
Understanding the Error Messages...................................................................121
viii
Section V Software
14 Software and Network features 124
Section VI Appendixes
A Safety and Legal 126
Choosing a location ...........................................................................................126
To use the machine safely.................................................................................127
Important safety instructions........................................................................131
IMPORTANT - For your safety ....................................................................132
LAN connection ...........................................................................................133
Radio interference .......................................................................................133
EU Directive 2002/96/EC and EN50419......................................................133
International ENERGY STAR
®
Compliance Statement...............................133
Legal limitations for copying ..............................................................................134
Trademarks........................................................................................................135
B Troubleshooting and Routine Maintenance 136
Troubleshooting ................................................................................................136
If you are having difficulty with your machine ..............................................136
Dial Tone detection......................................................................................143
Telephone line interference.........................................................................143
Error and Maintenance messages.....................................................................144
Error animations Display .............................................................................150
Transferring your faxes or Fax Journal report .............................................150
Document jam ............................................................................................151
Printer jam or paper jam (MFC-5890CN and MFC-5895CW)......................152
Printer jam or paper jam (MFC-6490CW only) ............................................154
Routine maintenance.........................................................................................157
Replacing the ink cartridges ........................................................................157
Cleaning the outside of the machine ...........................................................160
Cleaning the scanner glass .........................................................................161
Cleaning the machine printer platen............................................................161
Cleaning the paper pick-up roller.................................................................162
Cleaning the print head ...............................................................................162
Checking the print quality ............................................................................163
Checking the print alignment .......................................................................164
Checking the ink volume .............................................................................165
Machine Information ..........................................................................................165
Checking the serial number.........................................................................165
Packing and shipping the machine....................................................................165
ix
C Menu and Features 168
On-screen programming....................................................................................168
Menu table...................................................................................................168
Memory storage...........................................................................................168
Mode and menu keys ........................................................................................168
Menu table...................................................................................................169
Entering Text ...............................................................................................194
D Specifications 195
General..............................................................................................................195
Print media.........................................................................................................198
Fax.....................................................................................................................199
Copy ..................................................................................................................200
PhotoCapture Center .....................................................................................201
PictBridge ..........................................................................................................202
Scanner .............................................................................................................203
Printer ................................................................................................................204
Interfaces...........................................................................................................205
Computer requirements (MFC-5890CN and MFC-6490CW) ............................206
Computer requirements (MFC-5895CW)...........................................................207
Consumable items .............................................................................................208
Network (LAN) ...................................................................................................209
E Glossary 210
FIndex 214
x
Section I
General I
General Information 2
Loading paper and documents 9
General setup 25
Security features 33
2
1
Using the
documentation
1
Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.
Symbols and conventions
used in the documentation 1
The following symbols and conventions are
used throughout the documentation.
General Information 1
Bold Bold typeface identifies specific
buttons on the machine's
control panel, or on the
computer screen.
Italics Italicized typeface emphasizes
an important point or refers you
to a related topic.
Courier
New
Text in Courier New font
identifies messages on the
LCD of the machine.
Warnings tell you what to do to
prevent possible personal injury.
Cautions specify procedures you
must follow or avoid to prevent
possible damage to the machine or
other objects.
Electrical Hazard icons alert you to
possible electrical shock.
Notes tell you how you should
respond to a situation that may arise
or give tips about how the operation
works with other features.
Improper Setup icons alert you to
devices and operations that are not
compatible with the machine.
General Information
3
1
Accessing the
Software User’s Guide
and Network User’s
Guide
1
This User’s Guide does not contain all the
information about the machine such as how
to use the advanced features of the Printer,
Scanner, PC Fax and Network. When you are
ready to learn detailed information about
these operations, read the Software User’s
Guide and Network User’s Guide that are
on the CD-ROM.
Viewing Documentation 1
Viewing Documentation
(For Windows
®
) 1
To view the documentation, from the Start
menu, point to Brother, MFC-XXXX (where
XXXX is your model name) from the
programs group, and then choose
User’s Guides in HTML format.
If you have not installed the software, you can
find the documentation by following the
instructions below:
a Turn on your PC. Insert the Brother
CD-ROM into your CD-ROM drive.
b If the model name screen appears, click
your model name.
c If the language screen appears, click
your language. The CD-ROM Main
Menu will appear.
Note
If this window does not appear, use
Windows
®
Explorer to run the start.exe
program from the root directory of the
Brother CD-ROM.
d Click Documentation.
e Click the documentation you want to
read.
HTML documents: Software
User’s Guide and Network User’s
Guide in HTML format.
This format is recommended for
viewing on your computer.
PDF documents: User’s Guide for
stand-alone operations, Software
User’s Guide and Network User’s
Guide in PDF format.
This format is recommended for
printing the manuals. Click to go to
the Brother Solutions Center, where
you can view or download the PDF
documents. (Internet access and
PDF Reader software are required.)
Chapter 1
4
How to find Scanning instructions 1
There are several ways you can scan
documents. You can find the instructions as
follows:
Software User’s Guide
Scanning
ControlCenter3
Network Scanning
ScanSoft™ PaperPort11SE with OCR
How-to-Guides
The complete ScanSoft™ PaperPort™
11SE with OCR How-to-Guides can be
viewed from the Help selection in the
ScanSoft™ PaperPort™ 11SE
application.
How to find Network setup
instructions (MFC-5895CW and
MFC-6490CW)
1
Your machine can be connected to a wireless
or wired network. You can find basic setup
instructions in the Quick Setup Guide. If your
wireless access point supports
SecureEasySetup™ (MFC-6490CW only),
Wi-Fi Protected Setup™ or AOSS™, follow
the steps in the Quick Setup Guide. For more
information about network setup please see
the Network User’s Guide.
Viewing Documentation
(For Macintosh)
1
a Turn on your Macintosh. Insert the
Brother CD-ROM into your CD-ROM
drive. The following window will appear.
(The window below may vary depending
on the model.)
b Double-click the Documentation icon.
c Double-click your language folder.
d Double-click top.html to view the
Software User's Guide and Network
User's Guide in HTML format.
e Click the documentation you want to
read:
Software User’s Guide
Network User’s Guide
General Information
5
1
How to find Scanning instructions 1
There are several ways you can scan
documents. You can find the instructions as
follows:
Software Users Guide
Scanning
ControlCenter2
Network Scanning
Presto! PageManager User’s Guide
The complete Presto! PageManager
User’s Guide can be viewed from the Help
selection in the Presto! PageManager
application.
How to find Network setup
instructions (MFC-5895CW and
MFC-6490CW)
1
Your machine can be connected to a wireless
or wired network. You can find basic setup
instructions in the Quick Setup Guide. If your
wireless access point supports
SecureEasySetup™ (MFC-6490CW only),
Wi-Fi Protected Setup™ or AOSS, follow
the steps in the Quick Setup Guide. For more
information about network setup please see
the Network User’s Guide.
Accessing Brother
Support
(For Windows
®
) 1
You can find all the contacts you will need,
such as Web support (Brother Solutions
Center).
Click Brother Support on the main menu.
The following screen will appear:
To access our web site
(http://www.brother.com
), click Brother
Home Page.
For the latest news and product support
information (http://solutions.brother.com
),
click Brother Solutions Center.
To visit our web site for original Brother
Supplies
(http://www.brother.com/original/
), click
Supplies Information.
To access the Brother CreativeCenter
(http://www.brother.com/creativecenter/
)
for FREE photo projects and printable
downloads, click Brother
CreativeCenter.
To return to the main page, click Back or
if you have finished, click Exit.
Chapter 1
6
MFC-6490CW Control panel overview 1
The MFC-5890CN, MFC-5895CW and MFC-6490CW have the same control panel keys.
Note
Most of the illustrations in this User’s Guide show the MFC-6490CW.
1 Fax and telephone keys:
Fax Preview
Lets you preview incoming and outgoing
faxes on the LCD.
Tel/R
This key is used to have a telephone
conversation after picking up the external
handset during the F/T pseudo-ring.
Also, when connected to a PBX, you can
use this key to gain access to an outside line
or to transfer a call to another extension.
Redial/Pause
Redials the last 30 numbers called. It also
inserts a pause when programming quick
dial numbers.
2Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone.
3 Mode keys:
Fax
Lets you access Fax mode.
Scan
Lets you access Scan mode.
Copy
Lets you access Copy mode.
Photo Capture
Lets you access PhotoCapture Center™
mode.
4 Menu keys:
Volume keys
d c
When the machine is idle, you can press
these keys to adjust the ring volume.
Phone Book key
Press to store One Touch, Speed Dial and
Group numbers in the machine’s memory.
Lets you store, look up, and dial numbers
that are stored in the memory.
21
910
21.12.2009
Fax
12:45
MeMem.Me
General Information
7
1
d or c
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
a or b
Press to scroll through the menus and options.
Menu
Access the main menu.
OK
Choose a setting.
Clear/Back
Press to delete characters or to go back to
the previous menu level.
5 Start keys:
Colour Start
Lets you start sending faxes or making
copies in full colour. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in colour or mono
depending on the scanning setting in the
ControlCenter software).
6PowerSave
Lets you put the machine into Power Save mode.
7 Stop/Exit
Stops an operation or exits from a menu.
8 Ink Management
Lets you clean the print head, check the print
quality, and check the available ink volume.
9 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD by
lifting it.
10 One Touch keys
These 3 keys give you instant access to 6
previously stored numbers.
Shift
To access One Touch numbers 4 to 6, hold
down Shift as you press the One Touch key.
Also, if no number is assigned to the key, you
can directly store the number by pressing the
empty key.
34 5
9
768
21.12.200921.12.2009
FaxFax
12:4512:45
Mem.Mem.
Chapter 1
8
LCD screen indications 1
The LCD shows the current machine status
when the machine is idle.
1 Wireless Status (MFC-5895CW and
MFC-6490CW)
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
2 Memory Status
Lets you see the available memory in the
machine.
3 Ink indicator
Lets you see the available ink volume.
4 Current Receive Mode
Lets you see the current receive mode.
Fax (Fax only)
F/T (Fax/Tel)
TAD (External TAD)
Mnl (Manual)
5 Faxes in memory
Shows how many received faxes are in the
memory.
Note
(MFC-6490CW)
If you receive a fax containing multiple paper
sizes (for example, a page of A4 data and a
page of A3 data), the machine may create and
store a file for each paper size. The LCD may
show that more than one fax job has been
received.
Basic Operations 1
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Mode Timer.
d Press d or c to choose 30Secs.
Press OK.
You can see the current setting on the
LCD:
e Press Stop/Exit.
0Max
21.12.200921.12.200921.12.2009
FaxFaxFax
12:4512:4512:45
Mem.Mem.Mem.
12 3 4
5
Network
MENU
Fax
Machine Info.
Initial Setup
Print Reports
Select & Press
OK
General Setup
9
2
2
Loading paper and
other print media
2
Note
(MFC-6490CW only)
For Tray #2, see Loading paper in paper
tray #2 (MFC-6490CW only) on page 12.
If the tray used for Fax mode is set to
Auto Select you should open and close
the scanner cover to reset the machine
after refilling paper tray #1.
Loading paper in paper
tray #1 2
a If the paper support flap is open, close it,
and then close the paper support. Pull
the paper tray completely out of the
machine.
Note
When you are using A3, Legal or Ledger
size paper, press and hold the universal
guide release button (1) as you slide out
the front of the paper tray.
If you are using A5 or smaller size paper,
make sure that the paper tray is not
extended.
b Open the paper tray cover (1).
Loading paper and documents 2
1
1
1
1
Chapter 2
10
c
With both hands, gently press and slide
the paper side guides (1) and then the
paper length guide (2) to fit the paper size.
Make sure that the triangular marks (3)
on the paper side guides (1) and paper
length guide (2) line up with the mark for
the paper size you are using.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
e Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray.
f Gently adjust the paper side guides to
the paper with both hands.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
2
3
1
Loading paper and documents
11
2
g Close the paper tray cover.
Check that the paper is flat in the tray
and below the maximum paper mark
(1)
.
h Slowly push the paper tray completely
into the machine.
WARNING
DO NOT push Tray #1 into the machine too
quickly. Doing this may cause injury to your
hand by trapping it between Tray #1 and
Tray #2. Please push Tray #1 slowly.
i While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
When you shorten Tray#1, take the paper
out of the tray. Then shorten the tray by
pressing the universal guide release
button (1). Adjust the paper length
guide (2) to fit the paper size you are going
to use. Then put the paper into the tray.
1
1
2
1
1
2
Chapter 2
12
Loading paper in paper
tray #2 (MFC-6490CW only) 2
Note
You can only use plain paper sizes A3,
A4, Ledger, Letter, Legal or Executive in
Tray #2.
a Pull the paper tray completely out of the
machine.
b Take off the paper tray cover (1).
c With both hands, gently press and slide
the paper side guides (1) and then the
paper length guide (2) to fit the paper
size.
Make sure that the triangular marks (3)
on the paper side guides (1) and paper
length guide (2) line up with the mark for
the paper size you are using.
1
2
1
3
Loading paper and documents
13
2
Note
If you are using Ledger, Legal or A3 size
paper, press and hold the universal guide
release button (1) as you slide out the
front of the paper tray.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
e Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
f Gently adjust the paper side guides with
both hands to fit the paper stack.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
g Put on the paper tray cover.
h Slowly push the paper tray back into the
machine.
1
1
Chapter 2
14
i If you are using A3, Ledger or Legal size
paper, complete the following steps.
Pull Tray #1 out of the machine.
j Press and hold the universal guide
release button (1) as you slide out the
front of the paper tray.
k Open the paper tray cover and adjust
the per length guide (1) for the paper.
l Close the paper tray cover and slowly
push the paper tray into the machine.
Pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
If you are finished using A3, Ledger or
Legal size paper and want to use a
smaller paper size, take the paper out of
the tray. Then shorten the tray by pressing
the universal guide release button (1).
Adjust the paper length guide (2) to fit the
paper size you are going to use. Then put
the smaller paper into the tray.
1
1
1
1
2
1
2
Loading paper and documents
15
2
Loading envelopes and
postcards 2
About envelopes 2
Use envelopes that weigh between 80 to
95 g/m
2
.
Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing many
envelopes.
CAUTION
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
That are of a baggy construction.
That are embossed (have raised writing
on them).
That have clasps or staples.
That are pre-printed on the inside.
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
How to load envelopes and postcards2
a Before loading, press the corners and
sides of envelopes or post cards to
make them as flat as possible.
Note
If envelopes or post cards are ‘double-
feeding’, put one envelope or post card in
the paper tray at a time.
Glue Double flap
Chapter 2
16
b
Put envelopes or post cards in the paper
tray with the address side down and the
leading edge (top of the envelopes) in
first. With both hands, gently press and
slide the paper side guides (1) and paper
length guide (2) to fit the size of the
envelopes or post cards.
If you have problems when printing on
envelopes, try the following suggestions:
2
a Make sure the flap is either to the side of
the envelope or to the back edge of the
envelope when printing.
b Adjust the size and margin in your
application.
Removing small printouts
from the machine 2
When the machine ejects small paper onto
the output paper tray you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
2
1
Loading paper and documents
17
2
Printable area 2
The printable area depends on the settings in the application you are using. The figures below
show the unprintable areas on cut sheet paper and envelopes. The machine can print in the
shaded areas of cut sheet paper when the Borderless print feature is available and turned on.
(See Printing for Windows
®
or Printing and Faxing for Macintosh in the Software User's Guide on
the CD-ROM.)
Note
The Borderless feature is not available for envelopes.
Cut Sheet Paper Envelopes
Top (1) Bottom (2) Left (3) Right (4)
Cut Sheet 3mm 3mm 3mm 3mm
Envelopes 12 mm 24 mm 3 mm 3 mm
3
4
1
2
3
4
1
2
Chapter 2
18
Acceptable paper and
other print media
2
The print quality can be affected by the type
of paper you use in the machine.
To get the best print quality for the settings
you have chosen, always set the Paper Type
to match the type of paper you load.
You can use plain paper, inkjet paper (coated
paper), glossy paper, transparencies and
envelopes.
We recommend testing various paper types
before buying large quantities.
For best results, use Brother paper.
When you print on inkjet paper (coated
paper), transparencies and photo paper,
be sure to choose the correct print media
in the ‘Basic’ tab of the printer driver or in
the Paper Type setting of the menu. (See
Paper Size and Type (MFC-6490CW
only) on page 27.)
When you print on Brother Photo paper,
load one extra sheet of the same photo
paper in the paper tray. An extra sheet has
been included in the paper package for
this purpose.
When you use transparencies or photo
paper, remove each sheet at once to
prevent smudging or paper jams.
Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.
Recommended print media 2
To get the best print quality, we suggest using
Brother paper. (See table below.)
If Brother paper is not available in your
country, we recommend testing various
papers before purchasing large quantities.
We recommend using ‘3M Transparency
Film’ when you print on transparencies.
Brother paper
Paper Type Item
A3 Plain BP60PA3
A3 Glossy Photo BP71GA3
A3 Inkjet (Matte) BP60MA3
A4 Plain BP60PA
A4 Glossy Photo BP71GA4
A4 Inkjet (Matte) BP60MA
10 x 15 cm Glossy Photo BP71GP
Loading paper and documents
19
2
Handling and using print
media 2
Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
You can only print on both sides of the
paper with PC printing. (See Printing for
Windows
®
in the Software User’s Guide
on the CD-ROM.)
Improper Setup
DO NOT use the following kinds of paper:
Damaged, curled, wrinkled, or
irregularly shaped paper
1 2 mm or greater
Extremely shiny or highly textured paper
Paper that cannot be arranged uniformly
when stacked
Paper capacity of the paper tray 2
Up to 50 sheets of 80 g/m
2
A4 paper.
Transparencies and photo paper must be
picked up from the output paper tray one
page at a time to avoid smudging.
1
1
Chapter 2
20
Choosing the right print media 2
Paper type and size for each operation 2
Paper Type Paper Size Usage
Fax Copy Photo
Capture
Printer
Cut Sheet Ledger 279.4 431.8 mm (11 17 in.) Yes Yes Yes Yes
A3 297 420 mm (11.7 16.5 in.) Yes Yes Yes Yes
Letter 215.9 279.4 mm (8 1/2 11 in.) Yes Yes Yes Yes
A4 210 297 mm (8.3 11.7 in.) Yes Yes Yes Yes
Legal 215.9 355.6 mm (8 1/2 14 in.) Yes Yes Yes
Executive 184 267 mm (7 1/4 10 1/2 in.) Yes
JIS B4 257 364 mm (10.1 14.3 in.) Yes
JIS B5 182 257 mm (7.2 10.1 in.) Yes
A5 148 210 mm (5.8 8.3 in.) Yes Yes
A6 105 148 mm (4.1 5.8 in.) Yes
Cards Photo 10 15 cm (4 6 in.) Yes Yes Yes
Photo L 89 127 mm (3 1/2 5 in.) Yes
Photo 2L 13 18 cm (5 7 in.) Yes Yes
Index Card 127 203 mm (5 8 in.) Yes
PostCard 1
100 148 mm (3.9 5.8 in.) Yes
PostCard 2
(Double)
148 200 mm (5.8 7.9 in.) Yes
Envelopes
C5 Envelope
162 229 mm (6.4 9 in.) Yes
DL Envelope
110 220 mm (4.3 8.7 in.) Yes
COM-10 105 241 mm (4 1/8 9 1/2 in.) Yes
Monarch 98 191 mm (3 7/8 7 1/2 in.) Yes
JE4 Envelope
105 235 mm (4.1 9.3 in.) Yes
Transparencies
Letter 215.9 279.4 mm (8 1/2 11 in.) Yes Yes
A4 210 297 mm (8.3 11.7 in.) Yes Yes
Loading paper and documents
21
2
Paper weight, thickness and capacity 2
1
Up to 150 sheets of 80 g/m
2
paper.
2
Up to 250 sheets of 80 g/m
2
paper.
Paper Type Weight Thickness No. of
sheets
Cut
Sheet
Plain Paper
64 to 120 g/m
2
0.08 to 0.15 mm
150
1
(Tray #2)
Plain Paper
(MFC-6490CW)
64 to 105 g/m
2
0.08 to 0.15 mm
250
2
Inkjet Paper
64 to 200 g/m
2
0.08 to 0.25 mm 20
Glossy Paper
Up to 220 g/m
2
Up to 0.25 mm 20
Cards Photo Card
Up to 220 g/m
2
Up to 0.25 mm 20
Index Card
Up to 120 g/m
2
Up to 0.15 mm 30
PostCard
Up to 200 g/m
2
Up to 0.25 mm 30
Envelopes
75 to 95 g/m
2
Up to 0.52 mm 10
Transparencies 10
Chapter 2
22
Loading documents 2
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF 2
The ADF can hold up to 50 pages and feeds
each sheet individually. Use standard
80 g/m
2
paper and always fan the pages
before putting them in the ADF.
Recommended environment 2
Document Sizes Supported 2
How to load documents 2
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
Make sure documents written with ink are
completely dry.
a Unfold the ADF Document Support (1)
and the ADF Document Output Support
Flap (2).
b Fan the pages well.
c Adjust the paper guides (1) to fit the
width of your documents.
Temperature: 20 C to 30 C
Humidity: 50% to 70%
Paper:
80 g/m
2
Length: (MFC-5890CN and
MFC-5895CW)
148 to 355.6 mm
(MFC-6490CW)
148 to 431.8 mm
Width: (MFC-5890CN and
MFC-5895CW)
148 to 215.9 mm
(MFC-6490CW)
148 to 297 mm
Weight:
64 to 90 g/m
2
1
2
1
Loading paper and documents
23
2
d Place your documents, face up, top
edge first in the ADF until you feel them
touch the feed roller.
Note
(MFC-6490CW only)
Insert A4/Letter documents short-edge
first.
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 2
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported 2
How to load documents 2
Note
To use the scanner glass, the ADF must
be empty.
a Lift the document cover.
b Using the document guidelines on the
left and top, place the document face
down in the upper left corner of the
scanner glass.
c Close the document cover.
CAUTION
If you are scanning a book or thick
document, DO NOT slam the cover down or
press on it.
Length: (MFC-5890CN and
MFC-5895CW)
Up to 297 mm
(MFC-6490CW)
Up to 431.8 mm
Width: (MFC-5890CN and
MFC-5895CW)
Up to 215.9 mm
(MFC-6490CW)
Up to 297 mm
Weight: Up to 2 kg
Chapter 2
24
Scannable area 2
The scannable area depends on the settings
in the application you are using. The figures
below show the unscannable area.
Usage Document
Size
Top (1)
Bottom (2)
Left (3)
Right (4)
Fax Ledger
(MFC-
6490CW
only)
3mm 3.7mm
A3
(MFC-
6490CW
only)
3mm 4.5mm
Letter 3 mm 4 mm
A4 3 mm (Scanner
Glass)
3mm
(ADF)
1mm
Legal 3 mm 4 mm
Copy All paper
sizes
3mm 3mm
Scan All paper
sizes
3mm 3mm
3
4
1
2
25
3
3
Power Save mode 3
To maintain print quality, prolong print head
life, and provide the best ink cartridge
economy, you should keep your machine
connected to the power at all times.
You can put the machine into Power Save
mode by pressing the Power Save key. You
can still receive telephone calls in Power
Save mode. For further information on
receiving faxes in the Power Save condition,
please see the table on page 25. The delayed
faxes that have been set up will be sent. You
can even retrieve faxes using Remote
Retrieval if you are away from your machine.
If you want to do other operations, you must
take the machine out of Power Save mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode 3
a Press and hold down the Power Save
key until the LCD shows
Shutting Down.
The LCD will stay on for a few seconds
before going off.
Bringing your machine out of
Power Save mode 3
a Press the Power Save key.
The LCD shows the date and time.
Note
Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 25.)
Power Save setting 3
You can customize the machine's
Power Save key. The factory setting is
Fax Receive:On. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
P.Save Setting.
d Press d or c to choose
Fax Receive:Off (or
Fax Receive:On).
Press OK.
e Press Stop/Exit.
1
You cannot receive a fax with Mono Start or
Colour Start.
2
You cannot receive a fax automatically if you have
set the receive mode to Fax/Tel.
3
Set before you switch off the machine.
General setup 3
On/Off
setting
Receive
mode
Available
operations
Fax Receive:
On
1
(factory
setting)
Fax Only
External
TAD
Fax Receive
Fax Detect
Delayed Fax
3
Fax Forward
3
Fax Storage
3
Fax Preview
3
PC Fax Receive
3
Remote Retrieval
3
Manual
Fax/Tel
2
Fax Detect
Delayed Fax
3
Fax Receive:
Off
No machine
operations will be
available other than
cleaning the print
head.
Chapter 3
26
Mode Timer 3
The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
Photo Capture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose Off, the
machine stays in the mode you used last.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Mode Timer.
d Press d or c to choose 0Sec, 30Secs,
1Min, 2Mins, 5Mins or Off.
Press OK.
e Press Stop/Exit.
Paper settings 3
Paper Size and Type
(MFC-5890CN and
MFC-5895CW) 3
Paper Type 3
To get the best print quality, set the machine
for the type of paper you are using.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Paper Type.
d Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
e Press Stop/Exit.
Note
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
General setup
27
3
Paper Size 3
You can use seven sizes of paper for printing
copies: A4, A5, A3, 10 15 cm (4 6in.),
Letter, Legal and Ledger and five sizes for
printing faxes: Ledger, Letter, Legal, A3 and
A4. When you change the size of paper you
load in the machine, you will need to change
the paper size setting at the same time so
your machine can fit an incoming fax on the
page.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Paper Size.
d
Press
d
or
c
to choose
A4
,
A5
,
A3
,
10x15cm
,
Letter
,
Legal
, and
Ledger
.
Press OK.
e Press Stop/Exit.
Paper Size and Type
(MFC-6490CW only) 3
To get the best print quality, set the machine
for the type of paper you are using.
You can use seven sizes of paper for printing
copies: A3, A4, A5, 10 15 cm (4 6in.),
Ledger, Letter and Legal and five sizes for
printing faxes: A3, A4, Ledger, Letter and
Legal. When you load a different size of paper
in the machine, you will need to change the
paper size setting at the same time so your
machine can fit an incoming fax on the page.
a Press Menu.
b Press a or b to chose General Setup.
Press OK.
c Press a or b to chose Tray Setting.
Press OK.
d Press a or b to choose Tray#1 or
Tray#2.
Press OK.
e Do one of the following:
If you chose Tray#1, press d or c to
choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or
Transparency.
Press OK.
Press a or b to choose Paper Size
and press d or c to choose A4, A5,
A3, 10x15cm, Letter, Legal or
Ledger.
Press OK.
If you chose Tray#2, press a or b to
choose Paper Size and press
d or c to choose A4, A3, Letter,
Legal or Ledger.
Press OK.
f Press Stop/Exit.
Note
You can only use plain paper and paper
sizes A3, A4, Ledger, Letter or Legal in
Tray #2.
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Chapter 3
28
Tray use in Copy mode
(MFC-6490CW only) 3
You can change the default tray the machine
will use for printing copies.
To change the default setting follow the
instructions below:
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Tray Setting.
Press OK.
d Press a or b to choose
Tray Use:Copy.
e Press d or c to choose Tray#1 or
Tray#2.
Press OK.
f Press Stop/Exit.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 93 and Tray
Select (MFC-6490CW only) on page 93.)
Tray use in Fax mode
(MFC-6490CW only) 3
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
Tray #1 is out of paper.
Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Tray Setting.
Press OK.
d Press a or b to choose Tray Use:Fax.
e Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
f Press Stop/Exit.
General setup
29
3
Secure Paper Feed mode for
A3 size Short Grain Paper 3
If your print datas have horizontal lines when
using A3 paper, your paper may be long grain
paper. Choose A3 - Short Grain to Off
to avoid this problems.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
A3 - Short Grain.
d Press d or c to choose Off.
Press OK.
e Press Stop/Exit.
Note
If you are not sure about the type of paper
you are using, consult the paper
packaging or manufacturer for paper
specifications.
Printing will be slower when using the
A3 - Short Grain setting On.
Volume Settings 3
Ring Volume 3
You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it. You can also change the volume
through the menu, by following the
instructions below:
Setting the Ring Volume from the
menu
3
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Ring.
e Press d or c to choose Low, Med, High
or Off.
Press OK.
f Press Stop/Exit.
Chapter 3
30
Beeper Volume 3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Beeper.
e Press d or c to choose Low, Med, High
or Off.
Press OK.
f Press Stop/Exit.
Speaker Volume 3
You can choose a range of speaker volume
levels, from High to Off.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Speaker.
e Press d or c to choose Low, Med, High
or Off.
Press OK.
f Press Stop/Exit.
Automatic Daylight
Savings Time
3
You can set the machine to change
automatically for daylight savings time. It will
reset itself forward one hour in the Spring and
backward one hour in the Autumn. Make sure
you have set the correct date and time in the
Date&Time setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Auto Daylight.
d Press d or c to choose Off (or On).
Press OK.
e Press Stop/Exit.
General setup
31
3
Sleep Mode 3
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode.
d Press d or c to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins which is the length of time the
machine is idle before entering sleep
mode.
Press OK.
e Press Stop/Exit.
LCD screen 3
LCD Contrast 3
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose LCD Contrast.
e Press d or c to choose Light, Med or
Dark.
Press OK.
f Press Stop/Exit.
Setting the backlight
brightness 3
If you are having difficulty reading the LCD,
try changing the brightness setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Backlight.
e Press d or c to choose Light, Med or
Dark.
Press OK.
f Press Stop/Exit.
Chapter 3
32
Setting the Dim Timer for the
backlight 3
You can set how long the LCD backlight stays
on after the last key press.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
e Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f Press Stop/Exit.
Setting the Wallpaper 3
You can change the wallpaper.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Wallpaper.
Press OK.
e Press a or b to choose your wallpaper
from the four available designs.
Press OK.
f Press Stop/Exit.
33
4
4
Secure Function Lock 4
Secure Function Lock lets you restrict public
access to certain machine functions (Fax,
Copy, Scan, Print
1
and PCC).
This feature also prevents users from
changing the default settings of the machine
by limiting access to the menu settings.
Before using the security features you must
first enter an administrator password.
Access to restricted operations can be
enabled by creating a restricted user.
Restricted users must enter a user password
to use the machine.
Make a careful note of your password. If you
forget it, please call your Brother dealer for
service.
1
Print includes PC-Fax Send as well as all print jobs.
Note
Only administrators can set limitations
and make changes for each user.
When Print is disabled, PC print jobs will
be lost without notification.
If Fax Tx is disabled, you cannot use any
function in the Fax menu.
Polling Receive is enabled only when the
both Fax Tx and Fax Rx are enabled.
Setting and changing the
Administrator Password 4
Setting the password 4
The password you set in these steps is for the
administrator. This password is used to set
up users and to turn Secure Function Lock on
or off. (See Setting up and changing
restricted users on page 35 and Turning
Secure Function Lock on/off on page 36.)
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Enter a four-digit number for the
password using numbers 0-9.
Press OK.
e Re-enter the password when the LCD
shows Verify:.
Press OK.
f Press Stop/Exit.
Security features 4
Chapter 4
34
Changing the password 4
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Set Password.
Press OK.
e Enter the registered four-digit password.
Press OK.
f Enter a four-digit number for the new
password.
Press OK.
g If the LCD shows Verify:, re-enter the
new password.
Press OK.
h Press Stop/Exit.
Setting up and changing the
Public user 4
Public users do not need to enter a password.
You can set up one Public user.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Setup User.
Press OK.
e Enter the administrator password.
Press OK.
f Press a or b to choose Public.
Press OK.
g Do one of the following:
To set up the Public user, press
d
or
c
to choose
Enable
or
Disable
for
Fax Tx
. After you have set
Fax Tx
, press
a
or
b
to choose the
settings for
Fax Rx
,
Copy(Color)
,
Copy(B&W)
,
Scan
,
Print
and
PCC
by repeating this step.
Press OK
To change the Public user setting,
press a or b to choose the setting
you want to change.
Press d or c to choose Enable or
Disable.
Repeat this step until you finish
changing settings.
Press OK
Note
If you disable PC Print and PhotoCapture
printings (PCC) for Public users it will also
disable those functions for all restricted
users.
h Press Stop/Exit.
Security features
35
4
Setting up and changing
restricted users 4
Setting up restricted users 4
You can set up users with restrictions and a
password. You can set up to 20 restricted users.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Setup User.
Press OK.
e Enter the administrator password.
Press OK.
f Press a or b to choose User01.
Press OK.
g Use the numeric keys to enter the user
name. (See Entering Text on page 194.)
Press OK.
h Enter a four-digit password for the user.
Press OK.
i Press d or c to choose Enable or
Disable for Fax Tx.
Press OK.
After you have set Fax Tx, press a or b
and repeat this step for Fax Rx,
Copy(Color), Copy(B&W)and Scan.
j Press a or b to choose Exit.
Press OK.
k Repeat f to j for entering each
additional user and password.
l Press Stop/Exit.
Note
You cannot use the same password as
another user’s password.
Changing user name, password or
settings for restricted users
4
a Press Menu.
b
Press
a
or
b
to choose
General Setup
.
Press OK.
c
Press
a
or
b
to choose
Function Lock
.
Press OK.
d Press a or b to choose Setup User.
Press OK.
e Enter the administrator password.
Press OK.
f Press a or b to choose the existing
restricted user you want to change.
Press OK.
g Press a or b to choose Change.
Press OK.
h Do one of the following:
If you want to change the name
press Clear/Back, and then enter
the new name. (See Entering Text
on page 194.)
Press OK.
To leave the name unchanged press
OK.
i Enter a new four-digit password for this
user.
Press OK.
j Press d or c to choose Enable or
Disable for Fax Tx.
Press OK.
After you have set Fax Tx, press a or b
and repeat this step for Fax Rx,
Copy(Color), Copy(B&W)and Scan.
k Press a or b to choose Exit.
Press OK.
l Repeat f to k if you want to change
more users and settings.
m Press Stop/Exit.
Chapter 4
36
Reset existing restricted users 4
You can reset restricted users one by one.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Setup User.
Press OK.
e Enter the administrator password.
Press OK.
f Press a or b to choose the existing
restricted user you want to reset.
Press OK.
g Press a or b to choose Reset.
Press OK.
h Press 1 to choose Yes.
i Do one of the following:
Set a new restricted user. (See
Setting up restricted users
on page 35.)
If you do not want to set a new
restricted user, go to step j.
j Repeat f to i if you want to reset more
users.
k Press Stop/Exit.
Turning Secure Function
Lock on/off 4
Note
If you enter the wrong password, the LCD
will show Wrong Password. Re-enter
the correct password.
Turning Secure Function Lock on 4
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Lock OffiOn.
Press OK.
e Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off 4
a Press Menu.
b Press a or b to choose Lock OniOff.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Security features
37
4
Switching users 4
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
a Hold down Shift as you press l.
Or, press Menu. Then press a or b to
choose Change User and press OK.
b Press a or b to choose your user name.
Press OK.
c Enter your four-digit password.
Press OK.
Changing to the Public mode 4
a Press Menu.
b Press a or b to choose Go to Public.
Press OK.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting. (See Mode Timer
on page 26.)
Reset all users 4
You can reset all settings and passwords for
the Public user and all restricted users.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose
Reset All Users.
Press OK.
e Enter your four-digit administrator
password.
Press OK.
f Press 1 to reset.
g Press Stop/Exit.
Chapter 4
38
Section II
Fax II
Sending a Fax 40
Receiving a Fax 49
Telephone and External devices 64
Dialling and storing numbers 72
Printing Reports 82
Polling 84
40
5
Entering Fax mode 5
When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 45.)
Contrast (See page 45.)
Glass ScanSize
(MFC-5890CN and MFC-5895CW:
See page 41.)
(MFC-6490CW: See page 42.)
Phone Book (See page 72.)
Outgoing Call (See page 73.)
Caller ID hist. (See page 74.)
Broadcasting (See page 43.)
Delayed Fax (See page 46.)
Batch TX (See page 47.)
Real Time TX (See page 46.)
Polled TX (See page 86.)
Polling RX (See page 84.)
Overseas Mode (See page 46.)
Set New Default (See page 47.)
Factory Reset (See page 47.)
When the option you want is highlighted,
press OK.
Faxing from the ADF 5
a Press (Fax).
b Place the document face up in the ADF.
(See Using the ADF on page 22.)
c Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview.
(See How to preview an outgoing fax
on page 42.)
d Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
To cancel, press Stop/Exit.
If you send a mono fax when the memory
is full it will be sent in real time.
You can send colour faxes up to A4 in size.
Sending a Fax 5
Sending a Fax
41
5
Faxing from the scanner glass
5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to A3 size for MFC-6490CW, and A4
size for MFC-5890CN and MFC-5895CW.
You cannot send colour faxes with multiple
pages.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
(MFC-6490CW only)
You can send colour faxes up to A4 in size.
a Press (Fax).
b Load your document face down on the
scanner glass. (See Using the scanner
glass on page 23.)
c Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview. For
details, see How to preview an outgoing
fax on page 42.
d Press Mono Start or Colour Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
If you press
Colour Start
, the
machine starts sending the document.
e Do one of the following:
To send a single page, press 2 to
choose No (or press Mono Start
again).
The machine starts sending the
document.
To send more than one page, press
1
to choose
Yes
and go to step
f
.
f
Place the next page on the scanner glass.
Press OK.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
Setting scanner glass size for
faxing (MFC-5890CN and
MFC-5895CW) 5
When documents are Letter size, you need to
set scan size to Letter. If you do not, the side
portion of the faxes will be missing.
a Press (Fax).
b Press a or b to choose
Glass ScanSize.
c Press d or c to choose Letter (or A4).
Press OK.
Note
You can save the setting you use most
often by setting it as default. (See Setting
your changes as a new default
on page 47.)
This setting is only available for sending
documents from the scanner glass.
Chapter 5
42
Setting scanner glass size for
faxing (MFC-6490CW only) 5
To fax a A3, Letter, Legal or Ledger size
document from the scanner glass, you need
to change the glass scan size setting.
a Press (Fax).
b Press a or b to choose
Glass ScanSize.
c Press d or c to choose A4, A3, Letter,
Legal or Ledger.
Note
You can save the setting you use most
often by setting it as default. (See Setting
your changes as a new default
on page 47.)
Colour fax transmission 5
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the memory.
When you send a colour fax, the machine will
send it in real time (even if Real Time TX is
set to Off).
How to preview an outgoing
fax 5
You can preview a fax message before you
send it. You must set the Real Time
Transmission and Polling RX to off before
you use this feature.
a Press (Fax).
b Load the document.
c Enter the fax number using the dial pad,
One Touch or Speed Dial.
d Press Fax Preview.
The machine starts scanning the
document and the outgoing fax appears
on the LCD. When the fax is open the
control panel keys will perform the
operations shown below.
e Press Mono Start.
Note
The fax message in the memory will be
sent and then erased when you press
Mono Start.
Cancelling a fax in progress 5
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
Key Description
Enlarge the fax.
Reduce the fax.
a or b Scroll vertically.
d or c Scroll horizontally.
Rotate the fax clockwise.
Go back to the previous page.
Go to the next page.
Sending a Fax
43
5
Broadcasting
(Monochrome only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One Touch, Speed Dial numbers and up to
50 manually dialled numbers in the same
broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a Press (Fax).
b Load your document.
c Press a or b to choose Broadcasting.
Press OK.
d You can add numbers to the broadcast
in the following ways:
Press a or b to choose Add Number
and enter a number using a dial pad.
Press OK.
Press a or b to choose Phone Book
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
Note
One Touch Dial locations begin with
l.
Speed Dial locations begin with
#.
e After you have entered all the fax
numbers by repeating step d, press
a or b to choose Complete.
Press OK.
f Press Mono Start.
Note
If you did not use up any of the numbers
for Groups, you can ‘broadcast’ faxes to
as many as 216 (MFC-5890CN and
MFC-5895CW) or 256 (MFC-6490CW)
different numbers.
The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.
Chapter 5
44
Cancelling a Broadcast in
progress 5
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcast job number.
d Press OK.
The LCD will ask you the following
message:
Cancel Job?
Yes i Press 1
No i Press 2
e Press 1 to cancel the number being
dialled.
The LCD will then show the Broadcast
job number.
f Press OK.
The LCD will ask you the following
message:
Cancel Job?
Yes i Press 1
No i Press 2
g Press 1 to cancel the Broadcast.
h Press Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings 5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, glass scan size, overseas mode,
delayed fax timer, polling transmission and
real time transmission.
a Press (Fax).
The LCD shows:
b Press a or b to choose a setting you
want to change.
c Press d or c to choose an option.
d Go back to b to change more settings.
Note
Most settings are temporary and the
machine returns to its default settings after
you send a fax.
You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 47.)
Sending a Fax
45
5
Contrast 5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a Press (Fax).
b Press a or b to choose Contrast.
c Press d or c to choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
When you send a colour fax.
When you choose Photo as the Fax
Resolution.
Changing fax resolution 5
The quality of a fax can be improved by
changing the fax resolution.
a Press (Fax).
b Press a or b to choose
Fax Resolution.
c Press d or c to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
Chapter 5
46
Dual access
(Monochrome only) 5
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning documents, press
Stop/Exit to cancel or Mono Start to send
the scanned pages.
Real time transmission 5
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
If the memory is full and you are sending a
black & white fax from the ADF, the machine
will send the document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
a Press (Fax).
b Press a or b to choose Real Time TX.
c Press d or c to choose On (or Off).
Press OK.
Note
In real time transmission, the automatic
redial feature does not work when using
the scanner glass.
Overseas Mode 5
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a Press (Fax).
b Load your document.
c Press a or b to choose
Overseas Mode.
d Press d or c to choose On (or Off).
Press OK.
Delayed Faxing
(Monochrome only) 5
During the day you can store up to 50 faxes
in the memory to be sent within 24-hours.
These faxes will be sent at the time of day you
enter in step e.
a Press (Fax).
b Load your document.
c Press a or b to choose Delayed Fax.
d Press d or c to choose On.
Press OK.
e Enter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
Sending a Fax
47
5
Delayed Batch Transmission
(Monochrome only) 5
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
a Press (Fax).
b Press a or b to choose Batch TX.
c Press d or c to choose On.
Press OK.
d Press Stop/Exit.
Checking and cancelling
waiting jobs 5
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
d Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
e Do one of the following:
To cancel, press 1 to choose Yes.
If you want to cancel another job go
to step d.
To exit without cancelling, press 2 to
choose No.
f
When you have finished, press
Stop/Exit
.
Setting your changes as a
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
a Press (Fax).
b Press a or b to choose the menu option
that you want to change. Press d or c to
choose your new setting.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (Fax).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Chapter 5
48
Sending a fax manually 5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Press (Fax).
b Load your document.
c To listen for a dial tone pick up the
handset of an external telephone.
d Dial the fax number.
e When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 on the machine to send a fax.
f Replace the handset.
Out of Memory message 5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start or
Colour Start to send the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
Note
If you do not want to delete your stored
faxes to clear the memory, you can
change the setting to send the fax in real
time. (See Real time transmission
on page 46.)
49
6
6
Receive modes 6
You must choose a receive mode depending on the external devices and telephone services you
have on your line.
Choose the Receive Mode 6
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct mode.
For more detailed information on the receive modes, see Using receive modes on page 50.
To set a receive mode follow the instructions below.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Receive Mode.
d Press d or c to choose Fax Only, Fax/Tel, External TAD or Manual.
Press OK.
e Press Stop/Exit.
The LCD will display the current receive mode.
Receiving a Fax 6
Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected on the
same line as the machine?
Yes
Fax Only
No
No
No
Manual
Yes
External TAD
Fax/Tel
Are you using the voice message function of
an external telephone answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Yes
Chapter 6
50
Using receive modes 6
Some receive modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the ring delay before using these
modes. (See Ring Delay on page 51.)
Fax only 6
Fax only mode will automatically answer
every call as a fax call.
Fax/Tel 6
Fax/Tel mode helps you automatically
manage incoming calls, by recognizing
whether they are fax or voice calls and
dealing with them in one of the following
ways:
Faxes will be automatically received.
Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.
(Also see F/T Ring Time (Fax/Tel mode only)
on page 51 and Ring Delay on page 51.)
Manual 6
Manual mode turns off all automatic
answering functions unless you are using the
BT Call Sign feature.
To receive a fax in manual mode lift the
handset of an external telephone. When you
hear fax tones (short repeating beeps), press
Mono Start or Colour Start and choose
Receive. You can also use the Fax Detect
feature to receive faxes by lifting a handset on
the same line as the machine.
(Also see Fax Detect on page 52.)
External TAD 6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:
Faxes will be automatically received.
Voice callers can record a message on the
external TAD.
(For more information see Connecting an
external TAD (telephone answering device)
on page 67.)
Receiving a Fax
51
6
Receive mode settings 6
Ring Delay 6
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine choose the maximum number of
rings.
(See Operation from extension telephones
on page 69 and Fax Detect on page 52.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Ring Delay.
e Press d or c to choose how many times
the line rings before the machine
answers.
Press OK.
If you choose 0, the line will not ring at
all.
f Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only) 6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T ring time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone. (For more information see
Using remote codes on page 70.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
F/T Ring Time.
e Press d or c to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press OK.
f Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
Chapter 6
52
Fax Detect 6
If Fax Detect is On: 6
The machine receives a fax call
automatically, even if you answer the call.
When you see Receiving on the LCD or
when you hear “chirps” through the handset
you are using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Off: 6
If you are at the machine and answer a fax
call by lifting the handset, press Mono Start
or Colour Start, then press 2 to receive the
fax.
If you answered at an extension telephone,
press l 5 1. (See Operation from extension
telephones on page 69.)
Note
If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external telephone
handset, press the remote activation code
l 5 1.
If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Fax Detect.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
Additional receiving
operations
6
Printing a reduced incoming
fax 6
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of A4, Letter or Legal size paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size setting. (See Paper Size and Type
(MFC-5890CN and MFC-5895CW)
on page 26 or Paper Size and Type (MFC-
6490CW only) on page 27.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Auto Reduction.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
Receiving a Fax
53
6
Setting Receiving Priority 6
If a A3 Colour fax is sent to your machine, your machine will receive either a A3 mono fax or a A4
Colour fax depending on the Receiving Priority setting. If you choose Mono(Max.A3), you will
receive a A3 mono fax. If you choose Colour(Max.A4), you will receive a A4 Colour fax.
Note
The default setting is Mono(Max.A3), so the machine cannot receive A4 colour fax by default.
1
These results may vary depending on the sending machine's ability.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose Setup Receive.
Press OK.
d Press a or b to choose Mono/Colour.
e Press d or c to choose Mono(Max.A3) or Colour(Max.A4).
Press OK.
f Press Stop/Exit.
Receiving
Priority
Document
Sent
Document
Received
Fax Preview Storage OFF
Memory Receive (On)
Fax Storage
Fax Forward
PC-FAX
CLR (Max. A4)
Colour
A4 Colour A4
N/A
(Colour
Printout)
(Colour
Printout)
N/A
(Colour
Printout)
N/A
(Colour
Printout)
A3
Colour A4
1
(Reduced)
Mono
A4 Mono A4
Available
(Mono
Printout)
Available
Available
(Up to A4
size)
A3 Mono A4
1
(Reduced)
Mono (Max. A3)
Colour
A4 Mono A4
1
A3 Mono A3
1
Mono
A4 Mono A4
A3 Mono A3
Chapter 6
54
Printing a fax from the
memory 6
If you have chosen fax storage, you can still
print a fax from the memory when you are at
your machine. If you have chosen
Fax Preview, see Fax Preview
(Monochrome only) on page 58.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Print Document.
Press OK.
d Press Mono Start.
e Press Stop/Exit.
Note
When you print a fax from the memory, the
fax data will be erased.
Out of Paper Reception 6
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (See Loading paper and other
print media on page 9.)
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored into
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
Memory Receive
(Monochrome only)
6
You can only use one Memory Receive
operation at a time:
Fax Forwarding
Fax Storage
PC Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Memory
Receive operations, a message will appear
on the LCD. (See Changing Memory Receive
Operations on page 58.)
Note
When you receive a colour fax, the
machine will treat the data as a colour or
monochrome fax depending on the
Receive Priority setting. (See Setting
Receiving Priority on page 53.)
Receiving a Fax
55
6
Fax Forwarding 6
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Fax Forward.
Press OK.
f Enter the forwarding number (up to 20
digits).
Press OK.
g Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine. This
Backup Print:On feature will not work
if Fax Preview is on.
The machine can store faxes approximately
24 hours if there is a power failure.
h Press Stop/Exit.
Fax Storage 6
If you choose Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the remote retrieval
commands.
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Fax Storage.
Press OK.
f Press Stop/Exit.
Chapter 6
56
PC Fax Receive 6
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The number of received faxes
that are stored in the memory will appear at
the bottom left side of the LCD.
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see PC-FAX
receiving in the Software User’s Guide on the
CD-ROM.)
If you choose Backup Print:On the
machine will also print the fax.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose
PC Fax Receive.
Press OK.
f Press a or b to choose <USB> or the PC
you want to receive.
Press OK.
g Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
h Press Stop/Exit.
Note
PC Fax Receive is not supported in the
Mac OS.
Before you can set up PC Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX receiving in the Software
User’s Guide on the CD-ROM.)
In the event of a power failure, the
machine will store your faxes in the
memory for approximately 24 hours.
However, if you choose
Backup Print:On the machine will print
the fax, so you will have a copy if there is
a power failure before it is sent to the PC.
If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
and Maintenance messages
on page 144.)
Receiving a Fax
57
6
Changing the destination PC 6
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose
PC Fax Receive.
Press OK.
f Press a or b to choose Change.
Press OK.
g Press a or b to choose <USB> or the PC
you want to receive.
Press OK.
h Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
i Press Stop/Exit.
Turning off Memory Receive
Operations 6
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
Press OK.
e Press a or b to choose Off.
Press OK.
f Press Stop/Exit.
Note
The LCD will give you more options if
there are received faxes still in your
machine’s memory. (See Changing
Memory Receive Operations on page 58.)
Chapter 6
58
Changing Memory Receive
Operations 6
If received faxes remain in your machine’s
memory when you change the Memory
Receive Operations, the LCD will ask you
one of the following questions:
Erase All Doc?
Yes i Press 1
No i Press 2
Print All Fax?
Yes i Press 1
No i Press 2
If you press 1, faxes in the memory will
be erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
If you press 2, faxes in the memory will
not be erased or printed and the setting
will be unchanged.
If received faxes are left in the machine's
memory when you change to
PC Fax Receive from another option
[Fax Forward or Fax Storage], press a or
b to choose the PC.
The LCD will ask you the following question:
Send Fax to PC?
Yes i Press 1
No i Press 2
If you press 1, faxes in the memory will
be sent to your PC before the setting
changes. You will be asked if you want
to turn on Backup Print. (For detail, see
PC Fax Receive on page 56.)
If you press 2, faxes in the memory will
not be erased or transferred to your PC
and the setting will be unchanged.
Fax Preview
(Monochrome only)
6
How to preview a received fax6
You can view received faxes on the LCD by
pressing the Fax Preview key. When the
machine is in Ready mode, a popup message
will appear on the LCD to alert you of new
faxes.
Setting Fax Preview 6
a Press Fax Preview.
b Press 1 to choose Yes.
LCD asks you again to make sure that
faxes will not be printed.
Press 1 to choose OK.
Note
When you receive colour fax, the machine
will treat the data as colour fax or
monochrome fax depend on your setting
for Memory Receive. (See Setting
Receiving Priority on page 53.)
When Fax Preview is turned On, a backup
copy of received faxes will not be printed,
even if you have set Backup Print On.
Receiving a Fax
59
6
Using Fax Preview 6
When you receive a fax, you will see the pop-
up message on the LCD. (For example:
New Fax(es): 02)
a Press Fax Preview.
You can see the new fax list.
Note
(MFC-6490CW)
If you receive a fax containing multiple
paper sizes (for example, a page of A4
data and a page of A3 data), the machine
may create and store a file for each paper
size. The LCD may show that more than
one fax job has been received.
You can also see your old fax list by
pressing l. Press # to go back to your new
fax list.
b Press a or b to choose the fax you want
to see.
Press OK.
Note
If your fax is large there may be a delay
before it is displayed on the LCD.
The LCD will show the current page
number and total pages of the fax
message. When your fax message is over
99 pages the total number of pages will be
shown as “XX“.
c Press Stop/Exit.
When a fax is open the control panel keys will
perform the operations shown below.
Key Description
Enlarge the fax.
Reduce the fax.
a or b Scroll vertically.
d or c Scroll horizontally.
Rotate the fax clockwise.
Delete the fax.
Press 1 to confirm.
Go back to the previous page.
Go to the next page.
Go to the next step.
(Print, Back and Exit are
available.)
Go back to the fax list.
Mono Start
Print the fax.
Do one of the following:
Press 1 to print the whole
message.
Press 2 to print only the
displayed page.
Press 3 to print from the
displayed page.
(After printing, you can choose
to delete or re-print the fax.)
Chapter 6
60
How to delete all faxes in the list 6
a Press Fax Preview.
b Press a or b to choose Delete All.
Press OK.
Press 1 to confirm.
c Press Stop/Exit.
How to print all faxes in the list 6
a Press Fax Preview.
b Press a or b to choose Print All.
Press OK.
c Press Stop/Exit.
Changing the settings to turn
off Fax Preview 6
a Press Fax Preview.
b Press a or b to choose
Fax Preview i Off.
Press OK.
c Press 1 to choose Yes.
d Do one of the following:
If you do not want to print the stored
faxes, press 1. The machine asks
you to confirm the deletion of the
stored faxes. Press 1 to confirm.
If you want to print all the stored
faxes, press 2.
If you want to cancel the setting,
press 3.
Press Stop/Exit.
Remote Retrieval 6
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code 6
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is the inactive code (--- ).
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remote Access.
d Enter a three-digit code using numbers
0-9, l, or #.
Press OK. (The preset ‘ ’ cannot be
changed.)
Note
Do not use the same code as your
Remote Activation Code (l 5 1) or Remote
Deactivation Code (# 5 1). (See Operation
from extension telephones on page 69.)
e Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press Clear/Back in
step d to restore the inactive setting (--- )
and press OK.
Receiving a Fax
61
6
Using your Remote Access
Code 6
a Dial your fax number from a touch tone
telephone or another fax machine.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once.
c The machine signals if it has received
messages:
1 long beep Fax messages
No beeps — No messages
d When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e Press 9 0 to stop Remote Access when
you have finished.
f Hang up.
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds.
Chapter 6
62
Remote Fax commands 6
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by ), the system will give
two short beeps and you must enter a remote command.
Remote commands Operation details
95 Change the Fax Forwarding or Fax
Storage settings
1 OFF You can choose Off after you have retrieved or erased all
your messages.
2 Fax Forwarding One long beep means the change is accepted. If you hear
three short beeps, the change was not accepted because
something has not been set up (for example, a Fax
Forwarding number has not been registered). You can
register your Fax Forwarding number by entering 4. (See
Changing your Fax Forwarding number on page 63.) Once
you have registered the number, Fax Forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to receive stored
fax messages. (See Retrieving fax messages on page 63.)
3 Erase faxes from the memory If you hear one long beep, fax messages have been erased
from the memory.
97 Check the receiving status
1 Fax You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
98 Change the Receive Mode
1 External TAD If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90 Exit Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.
Receiving a Fax
63
6
Retrieving fax messages 6
You can call your machine from any touch
tone telephone and have your fax messages
sent to a machine. Before you use this
feature, you have to turn on Fax Storage.
a Dial your fax number.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
c When you hear two short beeps,
press 962.
d Wait for the long beep, enter the number
(up to 20 digits) of the remote fax
machine you want your fax messages
sent to using the dial pad, then enter # #.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing your Fax
Forwarding number 6
You can change the default setting of your fax
forwarding number from another touch tone
telephone or fax machine.
a Dial your fax number.
b When your machine answers, enter
your remote access code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
c When you hear two short beeps,
press 954.
d Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter # #.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Press 9 0 when you have finished.
f Hang up after you hear your machine
beep.
64
7
Voice operations 7
Voice calls can be made either with an
extension or external telephone, by dialling
manually, or by using Quick Dial numbers.
Tone or Pulse 7
If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below:
a Pick up the handset of the external
telephone.
b Press # on the machine’s control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will return to
the Pulse dialling service.
Fax/Tel mode 7
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (pseudo/double-
ringing) to alert you to pick up a voice call.
If you are at an external telephone, lift the
handset of the external telephone, and then
press Tel/R to answer.
If you are at an extension telephone, you'll
need to lift the handset during the F/T Ring
Time and then press #51 between the
pseudo/double rings. If no one is on the line,
or if someone wants to send you a fax, send
the call back to the machine by pressing
l 51.
Fax/Tel mode in Power Save
condition 7
When the machine is in Power Save mode
you can receive faxes if the Power Save
setting is Fax Receive:On. (See Power
Save setting on page 25.)
Fax/Tel mode does not work in the Power
Save condition. The machine will not answer
telephone or fax calls and will keep ringing. If
you are at an external or extension
telephone, lift the handset and talk. If you
hear fax tones, hold the handset until Fax
Detect activates your machine. If the other
party says they want to send you a fax,
activate the machine by pressing l 51.
Telephone and External devices 7
Telephone and External devices
65
7
Telephone services 7
Your machine supports the Caller ID
subscriber telephone service that some
telephone companies offer.
Features like Voice Mail, Call Waiting, Call
Waiting/Caller ID, answering services, alarm
systems or other custom features on one
telephone line may create problems with the
operation of your machine.
Note
Caller ID is available for U.K. and Ireland
only.
Caller ID
(U.K. and Ireland only) 7
The Caller ID feature lets you use the Caller
ID subscriber service offered by many local
telephone companies. Call your telephone
company for details. This service shows the
telephone number, or name if it is available,
of your caller as the line rings.
After a few rings, the LCD shows the
telephone number of your caller (and name, if
available). Once you answer a call, the Caller
ID information disappears from the LCD, but
the call information stays stored in the Caller
ID memory.
You can see the first 18 characters of the
number (or name).
The ID Unknown message means the
call originated outside your Caller ID
service area.
The ID Withheld message means the
caller has intentionally blocked
transmission of information.
You can print a list of the Caller ID information
received by your machine. (See How to print
a report on page 83.)
Note
The Caller ID service varies with different
carriers. Call your local telephone
company to find out about the kind of
service available in your area.
Setting the Caller ID to On 7
If you have Caller ID on your line, then this
function should be set to On to display the
caller's telephone number on the LCD as the
telephone rings.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose Caller ID.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
Chapter 7
66
Setting the Telephone Line
Type 7
If you are connecting the machine to a line
that features PBX or ISDN to send and
receive faxes, it is also necessary to change
the Telephone Line Type accordingly by
completing the following steps.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose
Phone Line Set.
d Press d or c to choose PBX, ISDN (or
Normal).
Press OK.
e Press Stop/Exit.
PBX and TRANSFER 7
The machine is initially set to Normal, which
lets the machine connect to a standard PSTN
(Public Switched Telephone Network) line.
However, many offices use a central
telephone system or Private Branch
Exchange (PBX). Your machine can be
connected to most types of PBX. The
machine's recall feature supports timed break
recall only (TBR). TBR will work with most
PBX systems allowing you to gain access to
an outside line, or transfer calls to another
extension. The feature works when Tel/R is
pressed.
Note
You can program a Tel/R key press as
part of a number stored in a One Touch
dial or Speed Dial location. When
programming the One Touch dial or
Speed Dial number, press Tel/R first (the
LCD shows ‘!’), then enter the telephone
number. If you do this, you do not need to
press Tel/R each time before you dial
using a One Touch dial or Speed Dial
location. (See Storing numbers
on page 74.) However, if PBX is not
chosen in the Telephone Line Type
setting, you cannot use the One Touch
dial or Speed Dial number that the Tel/R
press is programmed into.
BT Call Sign (U.K. only)
7
This machine feature lets you use the BT Call
Sign subscriber service which allows you to
have at least two separate telephone
numbers on one telephone line. Each
telephone number has its own distinctive
ringing pattern, so you know which telephone
number is ringing. This is one way you can
have a separate telephone number for your
machine.
Your machine has a BT Call Sign compatible
distinctive ringing function, allowing you to
dedicate a second telephone number (on the
same telephone line) just for receiving faxes.
Note
You can switch BT Call Sign off
temporarily, then turn it back on. When
you get a new fax number, make sure you
reset this function. This machine will
automatically answer incoming calls that
use your new fax number.
When you set the BT Call Sign feature to
ON, the receive mode is set to Manual
automatically. Manual mode will not
respond to incoming telephone calls,
since the number you use for telephone
calls will use the normal ring pattern.
Telephone and External devices
67
7
To enable the machine to work with BT
Call Sign (With your external
telephone only)
7
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose BT Call Sign.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
Note
If you turn off BT Call Sign, the receive
mode stays in Manual. You will need to
set receive mode again. (See Choose the
Receive Mode on page 49.)
Connecting an external
TAD (telephone
answering device)
7
You may choose to connect an external
answering device. However, when you have
an
external
TAD on the same telephone line
as the machine, the TAD answers all calls and
the machine ‘listens’ for fax calling (CNG)
tones. If it hears them, the machine takes over
the call and receives the fax. If it does not hear
CNG tones, the machine lets the TAD
continue playing your outgoing message so
your caller can leave you a voice message.
The TAD must answer within four rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the TAD
has answered the call, and with four rings there
are only 8 to 10 seconds of CNG tones left for
the fax ‘handshake’. Make sure you carefully
follow the instructions in this guide for recording
your outgoing message. We do not recommend
using the toll saver feature on your external
answering machine if it exceeds five rings.
Note
If you do not receive all your faxes, shorten
the Ring Delay setting on your external TAD.
1TAD
When the TAD answers a call, the LCD
shows Telephone.
Improper Setup
DO NOT connect a TAD elsewhere on the
same telephone line.
1
1
Chapter 7
68
Connections 7
The external TAD must be connected as
shown in the previous illustration.
a Set your external TAD to one or two
rings. (The machine's Ring Delay setting
does not apply.)
b Record the outgoing message on your
external TAD.
c Set the TAD to answer calls.
d Set the Receive Mode to
External TAD. (See Choose the
Receive Mode on page 49.)
Recording outgoing message
(OGM) on an external TAD 7
Timing is important in recording this message.
The message sets up the ways to handle both
manual and automatic fax reception.
a Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b Limit your speaking to 20 seconds.
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
Multi-line connections (PBX) 7
We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi line system we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator we recommend that
you set the Receive Mode to Manual.
We cannot guarantee that your machine will
operate properly under all circumstances
when connected to a PBX. Any difficulties
with sending or receiving faxes should be
reported first to the company who handles
your PBX.
Note
Make sure the Telephone Line Type is set
to PBX. (See Setting the Telephone Line
Type on page 66.)
Telephone and External devices
69
7
External and extension
telephones
7
Connecting an external or
extension telephone 7
You can connect a separate telephone to
your machine as shown in the diagram below.
1 Extension telephone
2 External telephone
When you are using an external or extension
telephone, the LCD shows Telephone.
Note
Please make sure you use an external
telephone with a cable no more than
3 metres long.
Operation from extension
telephones 7
If you answer a fax call on an extension or an
external telephone, you can make your
machine take the call by using the Remote
Activation Code. When you press the Remote
Activation Code l 51, the machine starts to
receive the fax.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Remote Deactivation Code # 5 1 to take
the call at an extension telephone. (See F/T
Ring Time (Fax/Tel mode only) on page 51.)
If you answer a call and no one is on
the line:
7
You should assume that you're receiving a
manual fax.
Press l 51 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 52.)
Using extension telephones
(For U.K. only) 7
Your premises may already be wired with
parallel extension telephones, or you may
plan to add extension telephones to your line,
as well as your machine. While the simplest
arrangement is a straightforward parallel
connection, there are some problems with
this arrangement, the most obvious of which
is inadvertent interruption of a facsimile
transmission caused by someone picking up
an extension telephone to make an outgoing
call. Also, remote activation code may not
operate reliably in such a simple
configuration.
This machine may also be set to make a
delayed transmission (i.e. a transmission at a
pre-set time). This pre-set job may coincide
with someone picking up an extension
handset.
These problems can easily be eliminated, if
you arrange modification of your extension
wiring circuit, such that extension devices are
connected ‘downstream’ of your machine in a
master/slave configuration (see fig. 2). In this
configuration the machine can always detect
whether a telephone is in use. Thus it will not
attempt to seize the line during that time. This
is known as ‘telephone off-hook detection.’
The inadvisable configuration is shown in
figure 1, and the recommended master/slave
configuration is shown in figure 2.
1
2
Chapter 7
70
This new connection configuration can be
arranged by contacting BT, Kingston upon
Hull Telecommunications, your PBX
maintainer or a qualified telephone
installation company as appropriate. Simply
explained, the extension telephone circuit
should be terminated on a normal modular
plug (BT 431A style), which in turn should be
put into the modular socket of the white ‘T’-
shaped connector provided as part of the line
cord assembly.
Inadvisable connection of extension
sockets (Fig. 1.)
7
1 Extension socket
2 Master socket
3 Incoming line
Recommended connection of extension
sockets (Fig. 2.)
7
1 Extension socket
2 Master socket
3 Incoming line
The fax machine must be plugged into the
master socket.
Note
These telephones are now connected as
external devices (see Connecting an
external or extension telephone
on page 69), because they are connected
to the fax machine via the T-connector.
Using a cordless external
telephone 7
If your cordless telephone is connected to the
telephone line cord (See External and
extension telephones on page 69) and you
typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Tel/R to send the call to the cordless handset.
Using remote codes 7
Remote Activation code 7
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds then
replace the handset. (See Fax Detect
on page 52.) Your caller will have to press
Start to send the fax.
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Mono Start and
choose Receive.
Remote Deactivation code 7
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing # 5 1
(make sure you press this between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Tel/R.
FAX
11
2
3
FAX
11
2
3
Telephone and External devices
71
7
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51. The preset
Remote Deactivation Code is #51. If you
want to, you can replace them with your own
codes.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Remote Codes.
e Press d or cto choose On (or Off).
Press OK.
f Enter the new Remote Activation Code.
Press OK.
g Press a or b to choose Deact.Code:
and enter the new Remote Deactivation
Code.
Press OK.
h Press Stop/Exit.
Note
If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
Remote Codes might not work with some
telephone systems.
72
8
How to Dial 8
Manual dialling 8
Press all of the digits of the fax or telephone
number.
One Touch Dialling 8
Your machine has 3 One Touch keys where
you can store 6 fax or telephone numbers for
automatic dialling.
Press the One Touch key that stores the
number you want to call. (See Storing
One Touch Dial numbers on page 74.) To
access numbers 4 to 6, hold down Shift as
you press the One Touch key.
Speed Dialling 8
a Press (Phone Book).
You can also choose Phone Book by
pressing (Fax).
b Press a or b to choose Search.
Press OK.
c Press the two-digit Speed Dial number.
(See Storing Speed Dial numbers
on page 76.)
d If you have two numbers in the location,
press a or b to choose the number you
want to call.
Press OK.
Note
If the LCD shows Not Registered
when you enter or search a One Touch or
Speed Dial number, a number has not
been stored at this location.
Dialling and storing numbers 8
Dialling and storing numbers
73
8
Search 8
You can search for names you have stored in
the One Touch and Speed Dial memory.
a Press (Phone Book).
You can also choose Phone Book by
pressing (Fax).
b Press a or b to choose Search.
Press OK.
c Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
Note
Press l to make the LCD font size larger.
•Press # to make the LCD font size smaller.
d If you chose Alphabetical Order in
step c, use the dial pad to enter the first
letter of the name, and then press a or b
to choose the name and number you
want to call.
Press OK.
Fax Redial 8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to a number
you recently dialled, you can press
Redial/Pause and choose one of the last 30
numbers from the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a Press Redial/Pause.
b Press a or b to choose the number you
want to redial.
Press OK.
c Press a or b to choose Send a fax.
Press OK.
d Press Mono Start or Colour Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Outgoing Call history 8
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
One Touch or Speed Dial, or delete from the
history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b Press a or b to choose the number you
want.
Press OK.
c Do one of the following:
To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Mono Start or Colour Start.
If you want to store the number,
press a or b to choose
Add To Phone Book.
Press OK.
(See Storing One Touch numbers
from Outgoing Calls on page 75 or
Storing Speed Dial numbers from
Outgoing Calls on page 77.)
Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
d Press Stop/Exit.
Chapter 8
74
Caller ID history 8
This feature requires the Caller ID subscriber
service offered by many local telephone
companies. (See Caller ID (U.K. and Ireland
only) on page 65.)
The number, or name if available, from the
last 30 faxes and telephone calls you
received will be stored in the Caller ID history.
You can view the list or choose one of these
numbers to fax to, add to One Touch or
Speed Dial, or delete from the history. When
the thirty-first call comes in to the machine, it
replaces information about the first call.
a Press (Fax).
b Press a or b to choose
Caller ID hist.
Press OK.
c Press a or b to choose the number you
want.
Press OK.
d Do one of the following:
To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Mono Start or Colour Start.
If you want to store the number,
press a or b to choose
Add To Phone Book.
Press OK.
(See Storing Speed Dial numbers
from Outgoing Calls on page 77.)
Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
e Press Stop/Exit.
Note
You can print the Caller ID list.
(See How to print a report on page 83.)
Storing numbers 8
You can set up your machine to do the
following types of easy dialling: One Touch,
Speed Dial and Groups for broadcasting
faxes. When you dial a Quick Dial number,
the LCD shows the name, if you stored it, or
the number.
Note
If you lose electrical power, the Quick Dial
numbers that are in the memory will not be
lost.
Storing a pause 8
Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialling
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.
Storing One Touch Dial
numbers 8
Your machine has 3 One Touch keys where
you can store 6 fax or telephone numbers for
automatic dialling. To access numbers 4 to 6
hold down Shift as you press the One Touch
key.
a Press the One Touch key where you
want to store the number.
Press 1 to choose Yes.
Note
You can also store one Touch Dial
numbers pressing (Phone Book).
Press a or b to choose
Set One Touch Dial.
Press OK.
Press a or b to choose the location where
you want to store the number in.
Press OK.
Dialling and storing numbers
75
8
b Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
To store the number without a name,
press OK.
c Enter the fax or telephone number (up to
20 digits).
Press OK.
Note
(MFC-6490CW only)
If you want to store an E-mail address to
use with Internet fax or Scan to E-mail
server, press a to choose Dial Type,
and then press d or c to change the option
to E-Address. Press b to choose
FAX/TEL/MAIL and then enter the E-mail
address. (See Entering Text
on page 194.)
d Press a or b to choose Complete.
Press OK.
e Press Stop/Exit.
Storing One Touch numbers from
Outgoing Calls
8
You can store One Touch numbers from the
Outgoing Call history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b Press a or b to choose the name or
number you want to store.
Press OK.
c Press a or b to choose
Add To Phone Book.
Press OK.
d Press a or b to choose the One Touch
Dial number where you want to store the
number.
Press OK.
Note
One Touch Dial numbers begin with (for
example, l 0 2).
e Do one of the following:
Enter the name using the dial pad
(up to 16 characters).
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
To store the number without a name,
press OK.
f Press OK to confirm the fax or
telephone number.
g Press a or b to choose Complete.
Press OK.
h Press Stop/Exit.
Storing One Touch numbers from the
Caller ID history
8
If you have the Caller ID subscriber service
from your telephone company you can also
store One Touch numbers from incoming
calls in the Caller ID History. (See Caller ID
(U.K. and Ireland only) on page 65.)
a Press (Fax).
b Press a or b to choose
Caller ID hist.
Press OK.
c Press a or b to choose the number you
want to store.
Press OK.
d Press a or b to choose
Add To Phone Book.
Press OK.
Chapter 8
76
e Press a or b to choose the 2-digit
One Touch location where you want to
store the number in.
Press OK.
Note
One Touch Dial numbers begin with (for
example, l 0 2).
f Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
To store the number without a name,
press OK.
g Press OK to confirm the fax or
telephone number.
h Press a or b to choose Complete.
Press OK.
i Press Stop/Exit.
Storing Speed Dial numbers 8
You can store up to 80 (MFC-5890CN and
MFC-5895CW) or 100 (MFC-6490CW)
2-digit Speed Dial locations with a name, and
each name can have two numbers. When
you dial you will only have to press a few keys
(For example: (Phone Book), the two-
digit number, and Mono Start or
Colour Start).
a Press (Phone Book).
b
Press
a
or
b
to choose
Set Speed Dial
.
Press OK.
c Press a or b to choose the Speed Dial
location where you want to store the
number in.
Press OK.
d Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
To store the number without a name,
press OK.
e Enter the fax or telephone number (up to
20 digits).
Press OK.
Note
(MFC-6490CW only)
If you want to store an E-mail address to
use with Internet fax or Scan to E-mail
server, press a to choose Dial Type,
and then press d or c to change the option
to E-Address. Press b to choose
FAX/TEL/MAIL, and then enter the
E-mail address and press OK. (See
Entering Text on page 194.)
f Do one of the following:
Enter the second fax or telephone
number (up to 20 digits).
Press OK.
If you do not want to store a second
number, press OK.
g Press a or b to choose Complete.
Press OK.
h Do one of the following:
To store another Speed Dial
number, go to step c.
To finish the setting, press
Stop/Exit.
Dialling and storing numbers
77
8
Storing Speed Dial numbers from
Outgoing Calls
8
You can also store Speed Dial numbers from
the Outgoing Call history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b Press a or b to choose the name or
number you want to store.
Press OK.
c Press a or b to choose
Add To Phone Book.
Press OK.
d Press a or b to choose the Speed Dial
location you want to store the number in.
Press OK.
Note
Speed Dial numbers begin with # (for
example, # 0 2).
e Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
To store the number without a name,
press OK.
f Press OK to confirm the fax or
telephone number.
g Do one of the following:
Enter the second fax or telephone
number (up to 20 digits).
Press OK.
If you do not want to store a second
number, press OK.
h Press a or b to choose Complete.
Press OK.
i Press Stop/Exit.
Storing Speed Dial numbers from the
Caller ID history
8
If you have the Caller ID subscriber service
from your telephone company you can also
store Speed Dial numbers from incoming
calls in the Caller ID History. (See Caller ID
(U.K. and Ireland only) on page 65.)
a Press (Fax).
b Press a or b to choose
Caller ID hist.
Press OK.
c Press a or b to choose the number you
want to store.
Press OK.
d Press a or b to choose
Add To Phone Book.
Press OK.
e Press a or b to choose the 2-digit
Speed Dial location you want to store
the number in.
Press OK.
Note
Speed Dial numbers begin with # (for
example, # 0 2).
f Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
To store the number without a name,
press OK.
g Press OK to confirm the fax or
telephone number.
h Do one of the following:
Enter the second fax or telephone
number (up to 20 digits).
Press OK.
If you do not want to store a second
number, press OK.
i Press a or b to choose Complete.
Press OK.
j Press Stop/Exit.
Chapter 8
78
Changing One Touch or
Speed Dial names or numbers8
You can change a One Touch or Speed Dial
name or number that has already been
stored.
a Press (Phone Book).
b Press a or b to choose
Set One Touch Dial or
Set Speed Dial.
Press OK.
c Press a or b to choose the 2-digit
One Touch or Speed Dial location you
want to change.
Press OK.
d Do one of the following:
Press a or b to choose Change.
Press OK.
Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
Go to step h.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear/Back. Re-enter the
character.
e Do one of the following:
If you want to change the name,
press a or b to choose Name. Press
OK and enter the name (up to 16
characters) using the dial pad.
Press OK.
(See Entering Text on page 194.)
If you do not want to change the
name, go to step f.
f Do one of the following:
If you want to change the fax or
telephone number, press a or b to
choose Fax/Tel1:. You can also
change Fax/Tel2: if you are
changing Speed Dial.
Press OK and enter the new fax or
telephone number (up to 20 digits).
Press OK.
If you do not want to change the
number, go to step g.
g Press a or b to choose Complete.
Press OK
h Press Stop/Exit.
Dialling and storing numbers
79
8
Setting up groups for
broadcasting 8
Groups, which can be stored in a One Touch
key or a Speed Dial location, allow you to
send the same fax message to many fax
numbers by pressing only a One Touch key
or (Phone Book), the two-digit location
and Mono Start. First, you'll need to store
each fax number in a One Touch key or
Speed-Dial location. Then you can include
them as numbers in the Group. Each Group
uses up a One Touch key or Speed Dial
location. You can have up to six Groups, or
you can assign up to 164 (MFC-5890CN and
MFC-5895CW), 204 (MFC-6490CW)
numbers in a large Group.
(See Storing Speed Dial numbers
on page 76 and Broadcasting (Monochrome
only) on page 43.)
a Press (Phone Book).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d Press a or b to choose the 2-digit
One Touch or Speed Dial location you
want to add to the Group.
Press OK.
Note
Speed Dial numbers start with #.
One Touch numbers start with l.
e Press a or b to choose Add Number.
Press OK.
f To add numbers to the group, press
a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
Note
Speed Dial numbers start with #.
One Touch numbers start with l.
g After you have finished adding numbers
by repeating steps e to f, press a or b
to choose Complete.
Press OK.
h Press Stop/Exit.
Note
You can print a list of all the One Touch
and Speed Dial numbers. Group numbers
will be marked in the GROUP column.
(See Reports on page 83.)
Changing a Group name 8
a Press (Phone Book).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group name
you want to change.
Press OK.
d Press a or b to choose
Change Group Name.
Press OK.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear/Back. Re-enter the
character.
Chapter 8
80
e Enter the new name (up to 16
characters) using the dial pad.
Press OK.
(See Entering Text on page 194. For
example, type NEW CLIENTS.)
f Press a or b to choose Complete.
Press OK.
g Press Stop/Exit.
Deleting a Group 8
a Press (Phone Book).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group you
want to delete.
Press OK.
d Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
e Press Stop/Exit.
Deleting a number from a Group 8
a Press (Phone Book).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group you
want to change.
Press OK.
d Press a or b to choose the number you
want to delete.
Press OK.
Press 1 to confirm.
e Press a or b to choose Complete.
Press OK.
f Press Stop/Exit.
Combining Quick Dial
numbers 8
Sometimes you may want to choose from
several long distance carriers when you
make a call. Rates may vary depending on
the time and destination. To take advantage
of low rates, you can store the access codes
of long-distance carriers and credit card
numbers as One Touch and Speed Dial
numbers. You can store these long dialling
sequences by dividing them and setting them
up as separate One Touch and Speed Dial
numbers in any combination. You can even
include manual dialling using the dial pad.
(See Storing Speed Dial numbers
on page 76.)
For example, you might have stored ‘555 ’ on
Speed Dial: 03 and ‘7000’ on One Touch: 02.
You can use them both to dial ‘555-7000’ if
you press the following keys:
a Press (Phone Book).
b Press a or b to choose Search.
Press OK.
c Press a or b to choose
Numerical Order.
Press OK.
d Press a or b to choose #03.
Press OK.
Note
Speed Dial numbers start with #.
One Touch numbers start with l.
e Press OK to choose Send a fax.
f Press a or b to choose Phone Book.
Press OK.
g Press a or b to choose Search.
Press OK.
h Press a or b to choose
Numerical Order.
Press OK.
Dialling and storing numbers
81
8
i Press a or b to choose l02.
Press OK.
j Press OK to choose Send a fax.
k Press Mono Start or Colour Start.
You will dial ‘555-7000 ’.
To temporarily change a number, you can
substitute part of the number with manual
dialling using the dial pad. For example, to
change the number to 555-7001 you could
press (Phone Book), choose Search,
press 03 and then press 7001 using the dial
pad.
Note
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Redial/Pause. Each key
press adds a 3.5-second delay.
82
9
Fax reports 9
You need to set up the Transmission
Verification Report and Journal Period using
the Menu keys.
Transmission Verification
Report 9
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the time and date of transmission
and whether the transmission was successful
(OK). If you choose On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Choosing On+Image, Off+Image or
Off2+Image (MFC-6490CW) will print a
section of the fax's first page on the report to
help you remember.
(MFC-5890CN and MFC-5895CW)
When the Verification Report is turned Off or
Off+Image, the Report will only print if there
is a transmission error, and the fax could not
be sent.
(MFC-6490CW)
When the Transmission Verification Report is
turned Off or Off+Image, the Report will
print if there is a transmission error and the
fax was not sent. It will also print if there is a
transmission error, with images reduced to a
smaller size.
When the Transmission Verification Report is
set to Off2 or Off2+Image, the Report will
only print if there is a transmission error, and
the fax could not be sent.
Note
If you choose On+Image or Off+Image
the image will only appear on the
Transmission Verification Report if Real
Time Transmission is set to Off. (See Real
time transmission on page 46.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Report Setting.
Press OK.
d Press a or b to choose XMIT Report.
e (MFC-5890CN and MFC-5895CW)
Press d or c to choose On, On+Image,
Off or Off+Image.
Press OK.
(MFC-6490CW)
Press d or c to choose On, On+Image,
Off, Off+Image, Off2 or
Off2+Image.
Press OK.
f Press Stop/Exit.
Printing Reports 9
Printing Reports
83
9
Fax Journal (activity report) 9
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, 2 or 7 days). If you set the interval to
Off, you can still print the report by following
the steps in How to print a report on page 83.
The factory setting is Every 50 Faxes.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Report Setting.
Press OK.
d Press a or b to choose
Journal Period.
e Press d or c to choose an interval.
Press OK.
(If you choose 7 days, the LCD will ask
you to choose the first day for the 7-day
countdown.)
6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory is filled with the
maximum 200 jobs before the time
you chose has passed, the machine
will print the Journal early and then
erase all jobs from the memory. If
you want an extra report before it is
due to print, you can print it without
erasing the jobs from the memory.
Every 50 Faxes
The machine will print the Journal
when the machine has stored 50
jobs.
f Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
g Press Stop/Exit.
Reports 9
The following reports are available:
XMIT Verify
Prints a Transmission Verification Report
for your last transmission.
Help List
A help list showing how to program your
machine.
Quick Dial
Lists names and numbers stored in the
One Touch and Speed Dial memory, in
alphabetical or numerical order.
Fax Journal
Lists information about the last incoming
and outgoing faxes. (TX: Transmit.)
(RX: Receive.)
User Settings
Lists your settings.
Network Config
Lists your Network settings.
Caller ID hist.
Lists the available Caller ID information
about the last 30 received faxes and
telephone calls.
How to print a report 9
a Press Menu.
b Press a or b to choose
Print Reports.
Press OK.
c Press a or b to choose the report you
want.
Press OK.
d Press Mono Start.
e Press Stop/Exit.
84
10
Polling overview 10
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive 10
Polling receive lets you call another fax
machine to receive a fax.
Setup to receive polling 10
a Press (Fax).
b Press a or b to choose Polling RX.
c Press d or c to choose Standard.
Press OK.
d Enter the fax number you are polling.
e Press Mono Start or Colour Start.
Setup to receive polling with
secure code 10
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If you want to get a fax from a
secured Brother machine you have to enter
the secure code.
a Press (Fax).
b Press a or b to choose Polling RX.
c Press d or c to choose Secure.
Press OK.
d Enter a four-digit secure code.
This is the same as the security code of
the fax machine you are polling.
Press OK.
e Enter the fax number you are polling.
f Press Mono Start or Colour Start.
Setup to receive delayed
polling 10
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (Fax).
b Press a or b to choose Polling RX.
c Press d or c to choose Timer.
Press OK.
d Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
e Enter the fax number you are polling.
f Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Polling 10
Polling
85
10
Sequential polling
(Monochrome only) 10
Sequential polling lets you request
documents from several fax machines in one
operation.
a Press (Fax).
b Press a or b to choose Polling RX.
c Press d or c to choose Standard,
Secure or Timer.
Press OK.
d Do one of the following:
If you chose Standard.
Press OK and go to step e .
If you chose Secure, press OK and
enter a four-digit number.
Press OK, go to step e.
If you chose Timer, press OK and
enter the time (24-hour format) you
want to begin polling.
Press OK, go to step e.
e Press a or b to choose Broadcasting.
Press OK.
f Do one of the following:
Press a or b to choose Add Number
and enter a number using a dial pad.
Press OK.
Press a or b to choose Phone Book
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
Note
One Touch Dial locations begin with
l.
Speed Dial locations begin with
#.
g After you have entered all the fax
numbers by repeating step f, press
a or b to choose Complete.
Press OK.
h Press Mono Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting jobs
on page 47.
Chapter 10
86
Polled transmit
(Monochrome only)
10
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and cancelling waiting jobs on page 47.)
Setup for polled transmit 10
a Press (Fax).
b Load your document.
c Press a or b to choose Polled TX.
d Press d or c to choose Standard.
Press OK.
e Press a or b to choose any settings you
want to change.
Press d or c to choose the settings.
After each setting is accepted, you can
continue to change more settings.
f Press Mono Start.
g If you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
Press 1 to send another page.
Go to h.
Press 2 or Mono Start to send the
document.
h Place the next page on the scanner
glass, press OK. Repeat g and h for
each additional page.
Your machine will automatically send
the fax.
Setup for polled transmit with
secure code 10
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If another person wants to retrieve
a fax from your machine, they will have to
enter the secure code.
a Press (Fax).
b Load your document.
c Press a or b to choose Polled TX.
d Press d or c to choose Secure.
Press OK.
e Enter a four-digit number.
Press OK.
f Press a or b to choose any settings you
want to change.
Press d or c to choose the settings.
After each setting is accepted, you can
continue to change more settings.
g Press Mono Start.
Section III
Copy III
Making copies 88
88
11
How to copy 11
Entering Copy mode 11
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 89.)
Enlarge/Reduce (See page 89.)
Tray Select (MFC-6490CW)
(See page 93.)
Paper Type (See page 93.)
Paper Size (See page 93.)
Brightness (See page 92.)
Contrast (See page 93.)
Stack/Sort (See page 92.)
Page Layout (See page 90.)
Skew Adjustment (MFC-6490CW)
(See page 94.)
Book Copy (See page 94.)
Watermark Copy (See page 95.)
Set New Default (See page 96.)
Factory Reset (See page 96.)
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the machine
stays in Copy mode after the last copy
operation. (See
Mode Timer on page 26
.)
Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy 11
a Press (Copy).
b Load your document.
(See Loading documents on page 22.)
c Press Mono Start or Colour Start.
Making multiple copies 11
You can make up to 99 copies in one print
run.
a Press (Copy).
b Load your document.
(See Loading documents on page 22.)
c Enter the number of copies you want.
d Press Mono Start or Colour Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 92.)
Stop copying 11
To stop copying, press Stop/Exit.
Making copies 11
COPY Copy Press Start
Normal
100%Enlarge/Reduce
Tray#1Tray Select
Ratio:
Quality
01
1
Making copies
89
11
Copy settings 11
You can change the copy settings temporarily
for the next multiple copies.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 26.)
If you have finished choosing settings, press
Mono Start or Colour Start.
If you want to choose more settings, press
a or b.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 96.)
Changing copy speed and
quality 11
You can choose from a range of quality. The
factory setting is Normal.
Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Quality.
e Press d or c to choose Fast, Normal or
Best.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Enlarging or reducing the
image copied 11
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
(MFC-5890CN and MFC-5895CW)
If you use this setting, use the scanner glass.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Enlarge/Reduce.
e Press d or c to choose 100%, Enlarge,
Reduce, Fit to Page or
Custom(25-400%).
f Do one of the following:
If you chose
Enlarge
or
Reduce
,
press OK and
press
d
or
c
to choose
the enlargement or reduction ratio you
want. Press
OK
.
If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
Press
OK
.
If you chose 100% or Fit to Page,
go to step g.
Chapter 11
90
g If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout and Skew Adjustment are
not available with Enlarge/Reduce.
Book Copy, Sort and
Watermark Copy are not available with
Fit to Page.
Fit to Page does not work properly if
the document on the scanner glass is
skewed by more than 3 degrees. Using
the document guidelines on the left and
top, place your document in the upper left
hand corner, with the document face down
on the scanner glass.
Fit to Page is not available for a Legal
size document.
Making N in 1 copies or a
poster (Page Layout) 11
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
(MFC-6490CW) The 1 to 2 feature copies
one A3 or Ledger size page onto two A4 or
Letter size pages. If you use this setting, use
the scanner glass.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important
Make sure paper size is set to Letter,
Ledger, A4 or A3.
You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
If you are producing multiple colour
copies, N in 1 copy is not available.
(P) means Portrait and (L) means
Landscape.
You can only make one poster copy and
1 to 2 copy at a time.
Note
Watermark Copy, Book Copy, Sort,
Enlarge/Reduce and
Skew Adjustment are not available with
Page Layout.
(MFC-5890CN and MFC-5895CW)
4 in 1 and Poster (3 3) are not available
if you are using A3 or Ledger size paper.
100%
198% 10x15cmiA4
186% 10x15cmiLTR
142% A4iA3, A5iA4
97% LTRiA4
93% A4iLTR
83% LGLiA4
69% A3iA4 (MFC-6490CW only), A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
Making copies
91
11
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
e (MFC-5890CN and MFC-5895CW)
Press d or c to choose Off(1 in 1),
2in1(P), 2in1(L),
4in1(P), 4in1(L),
Poster(2 x 2) or Poster(3 x 3).
Press OK.
Go to step g.
(MFC-6490CW)
Press d or c to choose Off(1 in 1),
2in1(P), 2in1(L),
4in1(P), 4in1(L), 1to2,
Poster(2 x 2) or Poster(3 x 3).
Press OK.
If you chose 2in1 or
Poster(2 x 2) with A3 or Ledger, go
to step f to choose the paper size of
your document.
If you choose another setting, go to
step g.
f (MFC-6490CW)
Do one of the following:
If you chose 2in1(P) or
2 in 1 (L), press a or b to choose
Layout Format. Press d or c to
choose LGRx2 i LGRx1,
LTRx2 i LGRx1, A3x2 i A3x1 or
A4x2 i A3x1.
If you chose Poster(2 x 2),
press a or b to choose
Layout Format. Press d or c to
choose LGRx1 i LGRx4,
LTRx1 i LGRx4, A3x1 i A3x4 or
A4x1 i A3x4.
g If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step h.
h After the machine scans the page,
press 1 to scan the next page.
i Place the next page on the scanner
glass.
Press OK.
Repeat steps h and i for each page of
the layout.
j After all the pages have been scanned,
press 2 to finish.
If you are copying from the ADF, insert the
document face up in the direction shown
below:
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Chapter 11
92
If you are copying from the scanner glass,
place the document face down in the
direction shown below:
2 in 1 (P)
2 in 1 (L)
1 to 2 (MFC-6490CW)
4 in 1 (P)
4 in 1 (L)
Poster (2 x 2)
You can make a poster size copy of a
photograph.
Poster (3 x 3)
You can make a poster size copy of a
photograph.
Sorting copies using the ADF11
You can sort multiple copies. Pages will be
sorted in the order 321, 321, 321, and so on.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Stack/Sort.
e Press d or c to choose Sort.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Fit to Page, Page Layout and
Book Copy are not available with Sort.
Adjusting Brightness and
Contrast 11
Brightness 11
You can adjust the copy brightness to make
copies darker or lighter.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Brightness.
e Press d or c to make a darker or lighter
copy.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Making copies
93
11
Contrast 11
You can adjust the copy contrast to help an
image look sharper and more vivid.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Contrast.
e Press d or c to change the contrast.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Paper Options 11
Paper Type 11
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Type.
e Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Paper Size 11
If copying on paper other than A4 size, you
will need to change the paper size setting.
You can copy only on Ledger, A3, Letter,
Legal, A4, A5 or Photo 10 cm 15 cm paper.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Paper Size.
e Press d or c to choose A4, A5, A3,
10x15cm, Letter, Legal or Ledger.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Tray Select (MFC-6490CW only) 11
You can change the tray that will be used for
the next copy. To change the default tray see
Tray use in Copy mode (MFC-6490CW only)
on page 28.
a Make sure you are in Copy mode.
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Tray Select.
e Press d or c to choose Tray#1 or
Tray#2.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Chapter 11
94
Skew Adjustment
(MFC-6490CW only) 11
If your copy is scanned skewed, your
machine can correct the data automatically.
This setting is only available when using the
scanner glass and 100% copy.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Skew Adjustment.
e Press d or c to choose Auto (or Off).
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout, Enlarge/Reduce,
Book Copy and Watermark Copy are
not available with Skew Adjustment.
You cannot use this setting with Ledger,
A3 or paper smaller than 64 mm 91 mm.
This setting is only available for paper that
is rectangular or square.
Skew Adjustment
is only available if the
document is skewed by less than 3 degrees.
Skew Adjustment may not work
correctly if your document is too thick.
Book Copy 11
Book copy corrects dark borders and skew.
Your machine can correct the data
automatically or you can make specific
corrections.
If you use this setting, use the scanner glass.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Book Copy.
e Do one of the following:
If you want to correct the data
yourself, press d or c to choose
On(Preview).
Press Mono Start or Colour Start
and go to step f.
If you want the machine to correct
the data automatically, press d or c
to choose On and go to step g.
f Adjust the skewed data by using # or l.
Remove the shadows by using a or b.
g If you have finished making corrections,
press Mono Start or Colour Start.
Note
Book Copy is not available with
Page Layout, Sort, Fit to Page,
Skew Adjustment or
Watermark Copy.
Making copies
95
11
Watermark Copy 11
You can place a logo or text into your
document as a Watermark. You can select
one of the template watermarks, data from
your media cards or USB Flash memory
drive, or scanned data.
Note
Watermark Copy is not available with
Fit to Page, Page Layout,
Skew Adjustment and Book Copy.
Using a template 11
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Watermark Copy.
Press OK.
e Press d or c to choose On.
f Press a or b to choose
Current Setting.
Press OK.
g Press a or b to choose Template.
Press OK.
h If you want to change any of the
displayed settings, press a or b to
choose the setting, and then press
d or c to choose the option you want.
i When you are finished changing
settings, press a or b to choose Apply.
Press OK.
j Press Mono Start or Colour Start.
Using data from a media card or USB
Flash memory drive data
11
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Watermark Copy.
Press OK.
e Press d or c to choose On.
f Press a or b to choose
Current Setting.
Press OK.
g Insert a media card or USB Flash
memory drive. Press a or b to choose
Media.
Press OK.
h Press d or c to choose the data you
want to use for the watermark.
Press OK.
i If you want to change any of the
displayed settings, press a or b to
choose the setting, and then press
d or c to choose the option you want.
j When you are finished changing
settings, press a or b to choose Apply.
Press OK.
k Press Mono Start or Colour Start.
CAUTION
DO NOT take out the memory card or USB
Flash memory drive while Photo Capture
is blinking to avoid damaging the card, USB
Flash memory drive or data stored on the
card.
Chapter 11
96
Using a scanned paper document as
your watermark
11
a Press (Copy).
b Enter the number of copies you want.
c Press a or b to choose
Watermark Copy.
Press OK.
d Press d or c to choose On.
e Press a or b to choose
Current Setting.
Press OK.
f Press a or b to choose Scan. Press OK,
and place the page that you want to use
as a watermark on the scanner glass.
g Press Mono Start or Colour Start.
h Take out the watermark document you
scanned and load the document you
want to copy.
i Press d or c to change the
Transparency of the watermark.
Press OK.
j Press Mono Start or Colour Start.
Note
You cannot enlarge or reduce the
scanned watermark.
Setting your changes as a
new default 11
You can save the copy settings for Quality,
Enlarge/Reduce, Tray Select (MFC-
6490CW only), Brightness, Contrast,
Page Layout or Skew Adjustment
(MFC-6490CW only) that you use most often
by setting them as the default settings. These
settings will stay until you change them again.
a Press (Copy).
b Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring all settings to the
factory settings 11
You can restore all the settings you have
changed back to the factory settings. These
settings will stay until you change them again.
a Press (Copy).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Making copies
97
11
Out of Memory’
message
11
If the Out of Memory message appears
while scanning documents, press Stop/Exit
to cancel or Mono Start or Colour Start to
copy the scanned pages.
You will need to clear some jobs from the
memory before you can continue.
To free up extra memory, do the following:
Turn off Memory Receive. (See Memory
Receive (Monochrome only) on page 54.)
Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 54.)
When you get an Out of Memory
message, you may be able to make copies if
you first print incoming faxes in the memory to
restore the memory to 100%.
Chapter 11
98
Section IV
Direct Photo Printing
IV
Printing photos from a memory card or
USB Flash memory drive
100
Printing photos from a camera 118
100
12
PhotoCapture Center™
Operations
12
Printing from a memory card
or USB Flash memory drive
without a PC 12
Even if your machine is not connected to your
computer, you can print photos directly from
digital camera media or a USB Flash memory
drive. (See Print Images on page 103.)
Scanning to a memory card or
USB Flash memory drive
without a PC 12
You can scan documents and save them
directly to a memory card or USB Flash
memory drive. (See Scan to a memory card
or USB Flash memory drive on page 114.)
Using PhotoCapture Center™
from your computer 12
You can access a memory card or USB Flash
memory drive that is inserted in front of the
machine from your PC.
(See PhotoCapture Center™ for Windows
®
or Remote Setup & PhotoCapture Center
for Macintosh in the Software User's Guide
on the CD-ROM.)
Using a memory card or USB
Flash memory drive 12
Your Brother machine has media drives (slots)
for use with the following popular digital camera
media: CompactFlash
®
, Memory Stick
,
Memory Stick PRO
, SD, SDHC, xD-Picture
Card
and USB Flash memory drives.
miniSD™ can be used with a miniSD™
adapter.
microSD can be used with a microSD
adapter.
Memory Stick Duo™ can be used with a
Memory Stick Duo™ adapter.
Memory Stick PRO Duo™ can be used
with a Memory Stick PRO Duo™ adapter.
Memory Stick Micro™ (M2™) can be used
with a Memory Stick Micro™ (M2™)
adapter.
Adapters are not included with the
machine. Contact a third party supplier for
adapters.
Printing photos from a memory
card or USB Flash memory drive
12
CompactFlash
®
Memory Stick™
Memory Stick PRO™
SD, SDHC xD-Picture Card™
USB Flash memory
drive
22 mm or less
11 mm or less
Printing photos from a memory card or USB Flash memory drive
101
12
The PhotoCapture Center™ feature lets you
print digital photos from your digital camera at
high resolution to get photo quality printing.
Memory cards or a USB Flash
memory drive folder structure12
Your machine is designed to be compatible
with modern digital camera image files,
memory cards and USB Flash memory drive;
however, please read the points below to
avoid errors:
The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center™ printing must be
performed separately from PhotoCapture
Center™ operations using the PC.
(Simultaneous operation is not available.)
IBM Microdrive™ is not compatible with
the machine.
The machine can read up to 999 files on a
memory card or USB Flash memory drive.
CompactFlash
®
Type II is not supported.
This product supports xD-Picture Card™
Type M / Type M
+
/ Type H (Large
Capacity).
The DPOF file on the memory cards must
be in a valid DPOF format. (See DPOF
printing on page 109.)
Please be aware of the following:
When printing Print Index or Print
Images, the PhotoCapture Center™ will
print all the valid images, even if one or
more images have been corrupted.
Corrupted images will not be printed.
(memory card users)
Your machine is designed to read memory
cards that have been formatted by a digital
camera.
When a digital camera formats a memory
card it creates a special folder into which it
copies image data. If you need to modify
the image data stored on a memory card
with your PC, we recommend that you do
not modify the folder structure created by
the digital camera. When saving new or
modified image files to the memory card
we also recommend you use the same
folder your digital camera uses. If the data
is not saved to the same folder, the
machine may not be able to read the file or
print the image.
(USB Flash memory drive users)
This machine supports USB Flash
memory drives that have been formatted
by Windows
®
.
Chapter 12
102
Getting started 12
Firmly put a memory card or USB Flash
memory drive into the correct slot.
1 USB Flash memory drive
2 CompactFlash
®
3 SD, SDHC
4 Memory Stick™, Memory Stick PRO™
5 xD-Picture Card™
CAUTION
The USB direct interface supports only a
USB Flash memory drive, a PictBridge
compatible camera, or a digital camera that
uses the USB mass storage standard. Any
other USB devices are not supported.
Photo Capture key indications:
Photo Capture light is on, the memory
card or USB Flash memory drive is
correctly inserted.
Photo Capture light is off, the memory
card or USB Flash memory drive is not
correctly inserted.
Photo Capture light is blinking, memory
card or USB Flash memory drive is being
read or written to.
CAUTION
DO NOT unplug the power cord or remove
the media from the media drive (slot) or
USB direct interface while the machine is
reading or writing to the media (the
Photo Capture key is blinking). You will
lose your data or damage the card.
The machine can only read one device at a
time.
1 2 3 4
5
Printing photos from a memory card or USB Flash memory drive
103
12
Entering PhotoCapture mode 12
After you insert the memory card or USB
Flash memory drive, press the
(Photo Capture) key to illuminate it in
blue and display the PhotoCapture options on
the LCD.
The LCD shows:
Press a or b to scroll through the
PhotoCapture key options.
View Photo(s) (See page 103.)
Print Index (See page 104.)
Print Photos (See page 105.)
Enhance Photos (See page 105.)
Search by Date (See page 108.)
Print All Photos (See page 108.)
Slide Show (See page 108.)
Trimming (See page 109.)
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 109.
When the option you want is highlighted,
press OK.
Print Images 12
View Photo(s) 12
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
View Photo(s).
Press OK.
c Press d or c to choose your photo.
Note
Instead of scrolling through your photos,
you can use the dial pad to enter the
number of the image from the index page.
(See Print Index (Thumbnails)
on page 104.)
d Press a or b to increase or decrease the
number of copies.
e Repeat step c and step d until you
have chosen all the photos.
Note
Press Clear/Back to go back to the
previous level.
f After you have chosen all the photos, do
one of the following:
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
View Photo(s)
PHOTO
Select & Press
OK
Print PhotosPrint Photos
Print IndexPrint Index
Enhance PhotosEnhance Photos
View photos on the LCD View photos on the LCD
and select the images and select the images
you want to you want to
print.print.
Search by DateSearch by Date
Print All PhotosPrint All Photos
Chapter 12
104
Print Index (Thumbnails) 12
The PhotoCapture Center™ assigns
numbers for images (such as No.1, No.2,
No.3, and so on).
The PhotoCapture Center™ uses these
numbers to identify each picture. You can
print a thumbnail page to show all the pictures
on the memory card or USB Flash memory
drive.
Note
Only file names that are 8 characters or
less will be printed correctly on the index
sheet.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose Print Index.
Press OK.
c Press a or b to choose
Layout Format. Press d or c to
choose 6 Images/Line or
5 Images/Line.
Press OK.
Print time for 5 Images/Line will be
slower than 6 Images/Line, but the
quality is better.
d Do one of the following:
Press a or b to choose
Paper Type, and press d or c to
choose the type of paper you are
using, Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy.
Press OK.
Press a or b to choose Paper Size
and press d or c to choose the paper
size you are using, A4 or Letter.
Press OK.
If you do not want to change the
paper settings, go to e.
e Press Colour Start to print.
6 Images/Line 5 Images/Line
Printing photos from a memory card or USB Flash memory drive
105
12
Printing Photos 12
Before you can print an individual image, you
have to know the image number.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Print the Index. (See Print Index
(Thumbnails) on page 104.)
c Press a or b to choose Print Photos.
Press OK.
d Enter the image number that you want to
print from the thumbnails printed on the
Index page.
Press OK.
e Repeat step d until you have entered
the image numbers that you want to
print.
Note
You can enter the numbers at one time by
using the l key for a comma or the # key
for a hyphen. For example, Enter 1, l, 3,
l, 6 to print images No.1, No.3 and No.6.
Enter 1, #, 5 to print images No.1 to No.5.
You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f After you have chosen the image
numbers, press OK again.
g Enter the number of copies you want
using the dial pad.
h Do one of the following:
Change the print settings. (See
page 110.)
If you do not want to change any
settings, press Colour Start to print.
Enhance Photos 12
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
After adding each effect, you can enlarge
the view of the image by pressing l. To go
back to the original size, press l again.
The Enhance Photos feature is supported
by technology from Reallusion, Inc.
Auto Correct 12
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Auto Correct.
Press OK.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Note
If Remove Red-Eye appears on the LCD,
press # to attempt to remove red-eye from
your photo.
Chapter 12
106
Enhance Skin-Tone 12
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Enhance Skin-Tone.
Press OK.
e Do one of the following:
Press OK if you do not want to
change any settings.
Press
a
or
b
to adjust the effect level
manually.
Press OK when you have finished.
f Press a or b to increase or decrease the
number of copies.
g Do one of the following.
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Enhance Scenery 12
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Enhance Scenery.
Press OK.
e Do one of the following:
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually.
Press OK when you have finished.
f Press a or b to increase or decrease the
number of copies.
g Do one of the following.
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Printing photos from a memory card or USB Flash memory drive
107
12
Remove Red-Eye 12
The machine detects eyes in your photos and
will attempt to remove red-eye from your photo.
Note
There are some cases when red-eye may
not be removed.
When the face is too small in the image.
When the face is turning too far up,
down, left or right.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Monochrome 12
You can convert your photo to monochrome.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press
a
or
b
to choose
Enhance Photos
.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Monochrome.
Press OK.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Sepia 12
You can convert the colour of your photo to sepia.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press
a
or
b
to choose
Enhance Photos
.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Sepia.
Press OK.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Chapter 12
108
Search by Date 12
You can find your photos based on date.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
Search by Date.
Press OK.
c Press a or b to choose the date that you
want to search from.
Press OK.
d Press d or c to choose your photo.
Note
You can view photos with other dates by
pressing d or c continuously. Press d to
view an older photo and c to view a more
recent photo.
e Press a or b to increase or decrease the
number of copies.
f Repeat step d and step e until you
have chosen all your photos.
g After you have chosen all your photos,
do one of the following:
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Print All Photos 12
You can print all the photos on your memory
card or USB Flash memory drive.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose
Print All Photos.
Press OK.
c Enter the number of copies you want
using the dial pad.
d Do one of the following:
Change the print settings. (See
page 110.)
If you do not want to change any
settings, press Colour Start to print.
Slide Show 12
You can view all your photos on the LCD
using Slide Show. You can also choose a
photo during the operation.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose Slide Show.
Press OK.
c Press Stop/Exit to finish Slide Show.
Printing a photo during a Slide Show 12
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose Slide Show.
Press OK.
c Press OK to stop at one image while
Slide Show is operating.
d Press a or b to increase or decrease the
number of copies.
e Do one of the following:
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
Printing photos from a memory card or USB Flash memory drive
109
12
Trimming 12
You can trim your photo and print a part of the
image.
Note
If your photo is very small or has irregular
proportions you may not be able to trim
the photo. The LCD will display
Image Too Small. or
Image Too Long.
a Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b Press a or b to choose Trimming.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Adjust the red frame around your photo.
The part inside of the red frame will be
printed.
Press l or # to enlarge or reduce the
frame size.
Press each arrow key to move the
position of the frame.
Press 0 to rotate the frame.
Press OK when you have finished
adjusting the frame setting.
e Press a or b to increase or decrease the
number of copies.
f Do one of the following:
Press OK and change the print
settings. (See page 110.)
If you do not want to change any
settings, press Colour Start to print.
DPOF printing 12
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, Fuji Photo
Film Co. Ltd., Matsushita Electric Industrial
Co. Ltd. and Sony Corporation) created this
standard to make it easier to print images
from a digital camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When a memory card containing DPOF
information is put into your machine, you can
print the chosen image easily.
a Make sure you have put a memory card
in the correct slot.
Press (Photo Capture). The
machine will ask you if you want to use
DPOF setting.
b Press 1 to choose Yes.
c Do one of the following:
Change the print settings. (See
page 110.)
If you do not want to change any
settings, press Colour Start to print.
Note
An Invalid DPOF File error can occur if the
print order that was created on the camera
has been corrupted. Delete and recreate
the print order using your camera to
correct this problem. For instructions on
how to delete or recreate the print order,
refer to your camera manufacturer’s
support website or accompanying
documentation.
Chapter 12
110
PhotoCapture Center™ print settings 12
You can change the print settings temporarily.
The machine returns to its default settings after 3 minutes, or if the Mode Timer returns the
machine to Fax mode. (See Mode Timer on page 26.)
Note
You can save the print settings you use most often by setting them as the default. (See Setting
your changes as a new default on page 114.)
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Enhance Photos, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
Menu Selections Options 1 Options 2 Page
Print Quality
(Not available for
DPOF printing)
Normal/Photo 111
Paper Type Plain Paper/Inkjet Paper/
Brother BP71/Other Glossy
111
Paper Size
10x15cm/13x18cm/
A4/A3/Letter/Ledger
(When A4 or Letter is chosen)
8 x 10cm/ 9 x 13cm/
10 x 15cm/13 x 18cm/
15 x 20cm/Max. Size
111
Brightness
(Not available when
Enhance Photos is
chosen)
112
Contrast
(Not available when
Enhance Photos is
chosen)
112
Print Setting
Print Quality
PHOTO
Paper Type
Paper Size
0
Brightness
10 x 15 cm
Other Glossy
0001
Photo
Print Press Start
Print Size Max. Size
1
Dark
Light
Printing photos from a memory card or USB Flash memory drive
111
12
Print Speed and Quality 12
a Press a or b to choose
Print Quality.
b Press d or c to choose Normal or
Photo.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Paper options 12
Paper Type 12
a Press a or b to choose Paper Type.
b Press d or c to choose the paper type
you are using, Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Paper and print size 12
a Press a or b to choose Paper Size.
b Press d or c to choose the paper size
you are using, 10x15cm, 13x18cm, A4,
A3, Letter or Ledger.
Press OK.
c If you chose A4 or Letter, press d or c to
choose the Print Size.
Press OK.
d If you do not want to change additional
settings, press Colour Start to print.
Color Enhance
(Not available when
Enhance Photos is
chosen)
On/Off
White Balance
Sharpness
Color Density
Exit
112
Cropping On/Off 113
Borderless On/Off 113
Date Print
(Not available for
DPOF printing)
On/Off 113
Set New Default Yes/No 114
Factory Reset Yes/No 114
Menu Selections Options 1 Options 2 Page
Example: Printed Position for A4 paper
1
8 x 10cm
2
9 x 13cm
3
10 x 15cm
4
13 x 18cm
5
15 x 20cm
6
Max. Size
Chapter 12
112
Adjusting Brightness,
Contrast and Colour 12
Brightness 12
a Press a or b to choose Brightness.
b Press d or c to make a darker or lighter
print.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Contrast 12
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a Press a or b to choose Contrast.
b Press d or c to change the contrast.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Colour Enhancement 12
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a Press a or b to choose
Color Enhance.
Press OK.
b Do one of the following:
If you want to customize the White
Balance, Sharpness or Colour
Density, press d or c to choose On,
and then go to step c.
If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c Press a or b to choose
White Balance, Sharpness or
Color Density.
d Press d or c to adjust the degree of the
setting.
Press OK.
e Do one of the following:
If you want to customize another
colour enhancement, press a or b to
choose another option.
If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f If you do not want to change additional
settings, press Colour Start to print.
Note
White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.
Printing photos from a memory card or USB Flash memory drive
113
12
Cropping 12
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
The factory setting is On. If you want to print
the whole image, turn this setting to Off. If
you are also using the Borderless setting,
turn Borderless to Off. (See Borderless
printing on page 113.)
a Press a or b to choose Cropping.
b Press d or c to choose Off (or On).
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Cropping: On
12
Cropping: Off 12
Borderless printing 12
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a Press a or b to choose Borderless.
b Press d or c to choose Off (or On).
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Date Print 12
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a Press a or b to choose Date Print.
b Press d or c to choose On (or Off).
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Note
The DPOF setting on your camera must
be turned off to use Date Print.
Chapter 12
114
Setting your changes as a
new default 12
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b After changing the last setting, press
a or b to choose Set New Default.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Restoring all settings to the
factory settings 12
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press a or b to choose
Factory Reset.
Press OK.
b Press 1 to choose Yes.
c Press Stop/Exit.
Scan to a memory card
or USB Flash memory
drive
12
Entering Scan mode 12
When you want to scan to a memory card or
USB Flash memory drive, press
(Scan).
The LCD shows:
Press a or b to choose Scan to Media.
Press OK.
If you are not connected to your computer
only the Scan to Media selection will appear
on the LCD.
(See Scanning for Windows
®
or Macintosh in
the Software User’s Guide on the CD-ROM
for details about the other menu options.)
How to scan to a memory card
or USB Flash memory drive 12
You can scan monochrome and colour
documents onto a memory card or USB Flash
memory drive. Monochrome documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Colour documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 150 dpi and
the default file format is PDF. The machine
automatically creates file names based on
the current date. (For details, see the Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2009 would be named
01070905.PDF. You can change the colour
and quality.
Scan to Image
Scan to Image
SCAN
Scan to OCR
Scan to OCR
Scan to File
Scan to File
Scan to E-mail
Scan to E-mail
Scan to Media
Scan to Media
Select & Press
OK
Scan a document
Scan a document
directly to a media
directly to a media
card or USB
card or USB
flash
flash
memory.
memory.
Printing photos from a memory card or USB Flash memory drive
115
12
a Insert a CompactFlash
®
, Memory
Stick™, Memory Stick PRO™, SD,
SDHC, xD-Picture Card™ or USB Flash
memory drive into your machine.
CAUTION
DO NOT take out the memory card while
Photo Capture is blinking to avoid
damaging the card or data stored on the
card.
b Load your document.
c Press (Scan).
d Press a or b to choose
Scan to Media.
Press OK.
e Do one of the following:
To change the quality, press a or b to
choose Quality.
Go to step f.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
Note
(MFC-6490CW only)
If you are using the scanner glass of the
machine you can change the glass scan
size
.
Press a or b to choose Glass ScanSize
and d or c to choose A4, A3, Letter,
Legal or Ledger.
f Press d or c to choose
Color 150 dpi, Color 300 dpi,
Color 600 dpi, B/W 200x100 dpi
or B/W 200 dpi.
Press OK.
g Do one of the following:
To change the file type, go to step h.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
h Press a or b to choose File Type.
Press d or c to choose JPEG, PDF or
TIFF.
Press OK.
Note
If you chose colour in the resolution
setting, you cannot choose TIFF.
If you chose monochrome in the resolution
setting, you cannot choose JPEG.
i Do one of the following:
To change the file name, go to
step j.
Press Mono Start or Colour Start to
start scanning without changing
additional settings.
j The file name is set automatically
however, you can set a name of your
choice using the dial pad. Press a or b to
choose File Name. Enter the new
name. (See Entering Text on page 194.)
You can only change the first 6
characters.
Press OK.
Note
Press Clear/Back to delete the current
name.
k Press Mono Start or Colour Start.
Quality Selectable File
Format
Color 150 dpi JPEG / PDF
Color 300 dpi JPEG / PDF
Color 600 dpi JPEG / PDF
B/W 200x100 dpi TIFF / PDF
B/W 200 dpi TIFF / PDF
Chapter 12
116
Glass Scan Size
(MFC-6490CW only) 12
To scan a Letter, Legal, Ledger, or A3 size
document, you need to change the
Glass ScanSize setting. The default
setting is A4.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Glass ScanSize.
d Press d or c to choose A4, A3, Letter,
Legal or Ledger.
Note
You can save the setting you use most
often by setting it as the default. (See
Setting your changes as a new default
on page 114.)
This setting is only available for scanning
documents from the scanner glass.
How to change the file name 12
You can change the file name.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose File Name.
d Enter the new name using the dial pad.
You can only change the first 6 digits.
(See Entering Text on page 194.)
How to set a new default 12
You can set your own default setting.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Set New Default.
Press OK and 1 to choose Yes.
d Press Stop/Exit.
How to reset to factory
settings 12
You can restore the machine to factory
settings.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Factory Reset.
Press OK and 1 to choose Yes.
d Press Stop/Exit.
Printing photos from a memory card or USB Flash memory drive
117
12
Understanding the
Error Messages
12
Once you are familiar with the types of errors
that can occur while you are using
PhotoCapture Center, you can easily
identify and troubleshoot any problems.
Hub is Unusable.
This message will appear if a Hub or USB
Flash memory drive with a Hub has been
put into the USB direct interface.
Media Error
This message will appear if you put in a
memory card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the memory card.
No File
This message will appear if you try to
access a memory card or USB Flash
memory drive in the drive (slot) that does
not contain a .JPG file.
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory. This message will
also appear when a memory card or USB
Flash memory drive you are using does
not have enough space available for the
scanned document.
Media is Full.
This message will appear if you are trying
to save more than 999 files in a memory
card or USB Flash memory drive.
Unusable Device
This message will appear if a USB device
or USB Flash memory drive that is not
supported has been connected to the USB
direct interface. For more information, visit
us at http://solutions.brother.com
. This
message will also appear if you connect a
broken device to the USB direct interface.
118
13
Printing photos
directly from a
PictBridge camera
13
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
If your camera is using the USB Mass
Storage standard, you can also print photos
from a digital camera without PictBridge.
(See Printing photos directly from a digital
camera (without PictBridge) on page 120.)
PictBridge requirements 13
To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center™ operations are
not available when using the PictBridge
feature.
Setting your digital camera 13
Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera.
Depending on your camera some of these
settings may not be available.
1
See DPOF printing on page 119 for more details.
2
If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the following settings.
When your camera does not have any menu
selections, these settings are also used.
The names and availability of each setting
depends on the specification of your camera.
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
Printing photos from a camera 13
Camera Menu
Selections
Options
Paper Size Ledger, A3, Letter, A4,
10x15cm, Printer Settings
(Default setting)
2
Paper Type Plain Paper, Glossy Paper,
Inkjet Paper, Printer Settings
(Default setting)
2
Layout Borderless: On, Borderless:
Off, Printer Settings (Default
setting)
2
DPOF setting
1
-
Print Quality
Normal, Fine,
Printer Settings (Default
setting)
2
Color
Enhancement
On, Off,
Printer Settings (Default
setting)
2
Date Print On, Off,
Printer Settings (Default
setting)
2
Settings Options
Paper Size 10x15cm
Paper Type Glossy Paper
Layout Borderless: On
Print Quality Fine
Color Enhancement Off
Date Print Off
Printing photos from a camera
119
13
Printing Images 13
Note
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
a Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the machine using
the USB cable.
1 USB direct interface
b Turn on the camera.
When the machine has recognized the
camera, the LCD shows
Camera Connected.
c Choose the photo you want to print
following the instructions from your
camera.
When the machine starts printing a
photo, the LCD will show Printing.
CAUTION
To prevent damage to your machine, do not
connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
DPOF printing 13
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, Fuji Photo
Film Co. Ltd., Matsushita Electric Industrial
Co. Ltd. and Sony Corporation) created this
standard to make it easier to print images
from a digital camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
Note
An Invalid DPOF File error can occur if the
print order that was created on the camera
has been corrupted. Delete and recreate
the print order using your camera to
correct this problem. For instructions on
how to delete or recreate the print order,
refer to your camera manufacturer's
support website or accompanying
documentation.
1
Chapter 13
120
Printing photos
directly from a digital
camera (without
PictBridge)
13
If your camera supports the USB Mass
Storage standard, you can connect your
camera in storage mode. This enables you to
print photos from your camera.
(If you would like to print photos in PictBridge
mode, see Printing photos directly from a
PictBridge camera on page 118.)
Note
The name, availability and operation differ
among digital cameras. Please refer to the
documentation supplied with your camera
for detailed information, such as how to
switch from PictBridge mode to USB mass
storage mode.
Printing Images 13
Note
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
a Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the machine using
the USB cable.
1 USB direct interface
b Turn on the camera.
c Follow the steps in Print Images
on page 103.
CAUTION
To prevent damage to your machine, do not
connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
1
Printing photos from a camera
121
13
Understanding the
Error Messages
13
Once you are familiar with the types of errors
that can occur while you are printing from a
camera, you can easily identify and
troubleshoot any problems.
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
Unusable Device
This message will appear if you connect a
camera which is not using the USB Mass
Storage standard. This message will also
appear if you connect a broken device to
the USB direct interface.
(For more detailed solutions see Error and
Maintenance messages on page 144.)
Chapter 13
122
Section V
Software V
Software and Network features 124
124
14
The CD-ROM includes the Software User’s
Guide and Network User’s Guide for features
available when connected to a computer (for
example, printing and scanning). These guides
have easy to use links that, when clicked, will
take you directly to a particular section.
You can find information on these features:
Printing
Scanning
ControlCenter3 (for Windows
®
)
ControlCenter2 (for Macintosh)
Remote Setup
Faxing from your computer
PhotoCapture Center
Network Printing
Network Scanning
Wired and Wireless Network
How to read HTML User’s Guide
This is a quick reference for using the HTML
User’s Guide.
For Windows
®
Note
If you have not installed the software, see
Viewing Documentation on page 3.
a From the Start menu, point to Brother,
MFC-XXXX (where XXXX is your model
number) from the programs group, then
click User’s Guides in HTML format.
b Click SOFTWARE USER’S GUIDE (or
NETWORK USER’S GUIDE) from the
top menu.
c Click the heading you would like to view
from the list at the left of the window.
For Macintosh
a Make sure your Macintosh is turned on.
Insert the Brother CD-ROM into your
CD-ROM drive.
b Double-click the Documentation icon.
c Double-click your language folder, and
then double-click top.html.
d Click SOFTWARE USER’S GUIDE (or
NETWORK USER’S GUIDE) in the top
menu, and then click the heading you
would like to read from the list at the left
of the window.
Software and Network features 14
Section VI
Appendixes VI
Safety and Legal 126
Troubleshooting and Routine Maintenance 136
Menu and Features 168
Specifications 195
Glossary 210
126
A
Choosing a location A
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put
the machine near a telephone socket and a standard grounded electrical socket. Choose a
location where the temperature remains between 10 C and 35 C.
WARNING
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment,
chemicals or water.
DO NOT connect your machine to electrical sockets on the same circuit as large appliances or
other equipment that might disrupt the power supply.
CAUTION
Avoid placing your machine in a high-traffic area.
Avoid placing your machine on a carpet.
DO NOT expose the machine to direct sunlight, excessive heat, moisture, or dust.
DO NOT connect your machine to electrical sockets controlled by wall switches or automatic
timers.
Disruption of power can wipe out information in the machine's memory.
Avoid interference sources, such as other cordless telephone systems or speakers.
DO NOT tip the machine, or place it on any tilted surface. Doing this may cause ink spillage
and internal damage to your machine.
Safety and Legal A
Safety and Legal
127
A
To use the machine safely A
Please keep these instructions for later reference and read them before attempting any
maintenance.
Note
If there are faxes in the machine's memory, you need to print them or save them before you
unplug the machine from the AC power outlet for more than 24 hours. (To print the faxes in
memory, see Printing a fax from the memory on page 54. To save the faxes in memory, see
Transferring faxes to another fax machine on page 150 or Transferring faxes to your PC
on page 150.)
WARNING
There are high voltage electrodes inside the machine. Before you clean the inside of the
machine, make sure you have unplugged the telephone line cord first and then the power cord
from the electrical socket. Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
DO NOT pull on the middle of the AC power cord. Doing this might cause an electrical shock.
128
DO NOT put your hands on the edge of the machine under the document cover or the scanner
cover. Doing this may cause injury.
DO NOT put your hands in front of the machine under the scanner cover. Doing this may cause
injury.
DO NOT put your hands on the edge of the paper tray under the paper tray cover. Doing this
may cause injury.
Safety and Legal
129
A
DO NOT touch the area shaded in the illustration. Doing this may cause injury.
When moving the machine you must lift it from the base, by placing a hand at each side of the
unit as shown in the illustration. DO NOT carry the machine by holding the scanner cover or the
Jam Clear Cover.
DO NOT use flammable substances, any type of spray, liquid or aerosol cleaners to clean the
inside or outside of the machine. Doing this may cause a fire or electrical shock.
130
If the machine becomes hot, releases smoke, or generates any strong smells, immediately
unplug the machine from the electrical socket. Call your Brother dealer or Brother Customer
Service.
If metal objects, water or other liquids get inside the machine, immediately unplug the machine
from the electrical socket. Call your Brother dealer or Brother Customer Service.
Use caution when installing or modifying telephone lines. Never touch telephone wires or
terminals that are not insulated unless the telephone line has been unplugged at the wall socket.
Never install telephone wiring during a lightning storm. Never install a telephone wall socket in
a wet location.
This product must be installed near an electrical socket that is easily accessible. In case of an
emergency, you must unplug the power cord from the electrical socket to shut off the power
completely.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a
qualified electrician.
Always make sure the plug is fully inserted.
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause a fire.
Safety and Legal
131
A
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to people, including the following:
1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink
or washing machine, in a wet basement or near a swimming pool.
2 Avoid using this product during an electrical storm. There may be a remote risk of electric
shock from lightning.
3 DO NOT use this product to report a gas leak in the vicinity of the leak.
4 DO NOT dispose of batteries in a fire. They may explode. Check with local codes for possible
special disposal instructions.
Important safety instructions A
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 DO NOT use this product near water.
5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
6 Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heater. This product should never be placed in a built-in installation unless
adequate ventilation is provided.
7 Use only the power cord supplied with this machine.
8 This product is equipped with a 3-wire grounded plug, a plug having a third (grounded) pin.
This plug will only fit into a grounded power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, call your electrician to replace your obsolete outlet. DO NOT
defeat the purpose of the grounded plug.
9 DO NOT allow anything to rest on the power cord. DO NOT place this product where people
can walk on the cord.
10 DO NOT place anything in front of the machine that will block received faxes. DO NOT place
anything in the path of received faxes.
11 Wait until pages have exited the machine before picking them up.
132
12 Unplug this product from the power socket and refer all servicing to Brother Authorized Service
Personnel under the following conditions:
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions are followed,
adjust only those controls that are covered by the operating instructions.
Incorrect adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
If the product has been dropped or the casing has been damaged.
If the product exhibits a distinct change in performance, indicating a need for service.
13 To protect your product against power surges, we recommend the use of a power protection
device (Surge Protector).
14 To reduce the risk of fire, electric shock and injury to people, note the following:
DO NOT use this product near appliances that use water, a swimming pool, or in a wet
basement.
IMPORTANT - For your safety A
To ensure safe operation, the supplied three-pin plug must be inserted only into a standard three-
pin electrical socket that is effectively grounded through the normal household wiring.
The fact that the equipment operates satisfactorily does not imply that the power is grounded and
that the installation is completely safe. For your safety, if in any doubt about the effective
grounding of the power, consult a qualified electrician.
Important - Wiring information (U.K. only) A
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same
rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This machine must be earthed. A
The wires in the mains lead are coloured in line with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
If in any doubt, call a qualified electrician.
Safety and Legal
133
A
LAN connection A
CAUTION
DO NOT connect this product to a LAN connection that is subject to over-voltages.
Radio interference A
This product complies with EN55022 (CISPR Publication 22) /Class B. When connecting the
machine to a computer, ensure that you use a USB cable which does not exceed 2.0 m in length.
EU Directive 2002/96/EC and EN50419 A
This equipment is marked with the above recycling symbol. It means that at the end of the life of
the equipment you must dispose of it separately at an appropriate collection point and not place
it in the normal domestic unsorted waste stream. This will benefit the environment for all.
(European Union only)
International ENERGY STAR
®
Compliance Statement A
The purpose of the International ENERGY STAR
®
Program is to promote the development and
popularization of energy-efficient office equipment.
As an ENERGY STAR
®
Partner, Brother Industries, Ltd. has determined that this product meets
the ENERGY STAR
®
guidelines for energy efficiency.
European
Union Only
134
Legal limitations for copying A
It is an offence to make reproductions of certain items or documents with the intent to commit
fraud. This memorandum is intended to be a guide rather than a complete list. We suggest you
check with relevant legal authorities if in doubt about a particular item or document.
The following are examples of documents which may not be copied:
Money
Bonds or other certificates of indebtedness
Certificates of Deposit
Armed Forces Service or Draft papers.
Passports
Postage Stamps (cancelled or uncancelled)
Immigration Papers
Welfare documents
Cheques or Drafts drawn by Governmental Agencies
Identification Documents, badges or insignias
Copyrighted works cannot be copied. Sections of a copyrighted work can be copied for ‘fair
dealing’. Multiple copies would indicate improper use.
Works of art should be considered the equivalent of copyrighted works.
Licenses and Certificates of Title to motor vehicles may not be copied under certain
state/provincial laws.
Safety and Legal
135
A
Trademarks A
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
© 2008-2010 Brother Industries, Ltd. All rights reserved.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the
United States and other countries.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the United States and
other countries.
Adobe, Flash, Illustrator and Photoshop are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of
Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
xD-Picture Card is a trademark of FUJIFILM Corporation.
PictBridge is a trademark.
Memory Stick, Memory Stick PRO, Memory Stick PRO Duo, Memory Stick Duo, MagicGate,
Memory Stick Micro and M2 are trademarks of Sony Corporation.
BROADCOM, SecureEasySetup and the SecureEasySetup logo are trademarks or registered
trademarks of Broadcom Corporation in the United States and/or other countries.
AOSS is a trademark of Buffalo Inc.
WPA and WPA2 are registered trademarks and Wi-Fi Protected Setup is a trademark of Wi-Fi
Alliance.
Wi-Fi and Wi-Fi Alliance are registered trademarks of the Wi-Fi Alliance.
Intel and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
AMD is a trademark of Advanced Micro Devices, Inc.
FaceFilter Studio is a trademark of Reallusion, Inc.
Each company whose software title is mentioned in this manual has a Software License
Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related
documents and any other materials are all trademarks or registered trademarks of those
respective companies.
136
B
Troubleshooting B
If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at
http://solutions.brother.com
.
If you are having difficulty with your machine B
Troubleshooting and Routine
Maintenance
B
Printing
Difficulty Suggestions
No printout Check the interface cable on both the machine and your computer. (See the Quick
Setup Guide.)
Make sure the machine is plugged in and not in Power Save mode.
Check to see if the LCD is showing an error message. (See Error and
Maintenance messages on page 144.)
If the LCD says Cannot Print and Replace Ink, see Replacing the ink
cartridges on page 157.
Check that the correct printer driver has been installed and chosen.
Make sure that the machine is online. Click Start and then Printers and Faxes.
Choose Brother MFC-XXXX (where XXXX is your model name), and make sure
that Use Printer Offline is unchecked.
When you choose the Print Odd Pages and Print Even Pages settings, you may
see a print error message on your computer, as the machine pauses during the
printing process. The error message will disappear after the machine re-starts
printing.
Poor print quality Check the print quality. (See Checking the print quality on page 163.)
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine’s menu matches the type of paper you are using. (See
Printing for Windows
®
or Printing and Faxing for Macintosh in the Software User’s
Guide on the CD
-ROM and Paper Size and Type (MFC-6490CW only)
on page 27.)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
The expiration date written on the cartridge package has passed. (Brother
Original cartridges stay usable for up to two years if kept in their original
packaging.)
The ink cartridge was in your machine over six months.
The ink cartridge may not have been stored correctly before use.
Make sure that you are using Brother Original Innobella™ ink.
Try using the recommended types of paper. (See Acceptable paper and other print
media on page 18.)
The recommended environment for your machine is between 20 C to 33 C.
Troubleshooting and Routine Maintenance
137
B
White horizontal lines appear in text
or graphics.
Clean the print head. (See Cleaning the print head on page 162.)
Make sure that you are using Brother Original Innobella™ ink.
Try using the recommended types of paper. (See Acceptable paper and other print
media on page 18.)
If you are using A3 long grain paper, you may get horizontal lines appearing on
your prints. Try turning off A3 Secure Feed. (See Secure Paper Feed mode for A3
size Short Grain Paper on page 29.)
If you are printing from a computer, change the paper size to A3 (Long Grain) in
the driver. (See Printing for Windows
®
or Printing and Faxing for Macintosh in the
Software User’s Guide on the CD-ROM.)
The machine prints blank pages. Clean the print head. (See Cleaning the print head on page 162.)
Make sure that you are using Brother Original Innobella™ ink.
Characters and lines are stacked. Check the printing alignment. (See Checking the print alignment on page 164.)
Printed text or images are skewed. Make sure the paper is loaded correctly in the paper tray and the paper side guides
are adjusted correctly. (See Loading paper and other print media on page 9.)
(MFC-6490CW)
Make sure the Outer Rear Cover and Inner Rear Cover are closed correctly.
(MFC-5890CN and MFC-5895CW)
Make sure the Jam Clear Cover is closed correctly.
Smudged stain at the top centre of
the printed page.
Make sure the paper is not too thick or curled. (See Acceptable paper and other
print media on page 18.)
Smudged stain at the right or left
corner of the printed page.
Make sure the paper is not curled when you print on the back side of the paper
with the Print Odd Pages and Print Even Pages settings.
Printing appears dirty or ink seems
to run.
Make sure you are using the recommended types of paper. (See Acceptable
paper and other print media on page 18.) Don't handle the paper until the ink is
dry.
Make sure that you are using Brother Original Innobella™ ink.
If you are using photo paper, make sure that you have set the correct paper type.
If you are printing a photo from your PC, set the Media Type in the Basic tab of
the printer driver.
Stains appear on the reverse side
or at the bottom of the page.
Make sure the printer platen is not dirty with ink. (See Cleaning the machine printer
platen on page 161.)
Make sure that you are using Brother Original Innobella™ ink.
Make sure you are using the paper support flap. (See Loading paper and other
print media on page 9.)
The machine prints dense lines on
the page.
Check Reverse Order in the Basic tab of the printer driver.
The printouts are wrinkled. In the printer driver Advanced tab, click Colour Settings, and uncheck
Bi-Directional Printing for Windows
®
or Bi-Directional Printing for Macintosh.
Make sure that you are using Brother Original Innobella™ ink.
Cannot perform ‘Page Layout
printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Printing (continued)
Difficulty Suggestions
138
Print speed is too slow. Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Advanced tab. Also, click Colour Settings, and make sure you uncheck
Colour Enhancement.
Turn the borderless feature off. Borderless printing is slower than normal printing.
(See Printing for Windows
®
or Printing and Faxing for Macintosh in the Software
User’s Guide on the CD
-ROM.)
Colour Enhancement is not
working correctly.
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
Photo paper does not feed
properly.
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Clean the paper pick
-up roller. (See Cleaning the paper pick-up roller
on page 162.)
Machine feeds multiple pages. Make sure the paper is loaded correctly in the paper tray. (See Loading paper and
other print media on page 9.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Printed pages are not stacked
neatly.
Make sure you are using the paper support flap. (See Loading paper and other
print media on page 9.)
Machine does not print from
Adobe
®
Illustrator
®
.
Try to reduce the print resolution. (See Printing for Windows
®
or Printing and
Faxing for Macintosh in the Software User’s Guide on the CD
-ROM.)
Printing Received Faxes
Difficulty Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received colour fax prints only in
black and white.
Replace the colour ink cartridges that are empty or nearly empty, and then ask the
other person to send the colour fax again. (See Replacing the ink cartridges
on page 157.)
Check that Setup Receive is set to Colour(Max.A4). (See Setting Receiving
Priority on page 53.)
Left and Right margins are cut off or
a single page is printed on two
pages.
Turn on Auto Reduction. (See Printing a reduced incoming fax on page 52.)
Printing (continued)
Difficulty Suggestions
Troubleshooting and Routine Maintenance
139
B
Telephone Line or Connections
Difficulty Suggestions
Dialling does not work. (No dial
tone)
Make sure the machine is plugged in and not in Power Save mode.
Check the line cord connections.
Change the Tone/Pulse setting. (See the Quick Setup Guide.)
Lift the external telephone’s handset, (or the machine’s handset or cordless
handset if available), and then dial the number to send a manual fax. Wait to hear
fax receiving tones before pressing Mono Start or Colour Start.
The machine does not answer
when called.
Make sure the machine is in the correct receiving mode for your setup. (See
Choose the Receive Mode on page 49.) Check for a dial tone. If possible, call your
machine to hear it answer. If there is still no answer, check the telephone line cord
connection. If there is no ringing when you call your machine, ask your telephone
company to check the line.
Receiving Faxes
Difficulty Suggestions
Cannot receive a fax. Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive mode settings on page 51.)
If you often have interference on the telephone line, try changing the menu setting
of Compatibility to Basic(for VoIP). (See Telephone line interference
on page 143.)
If you connect your machine to PBX or ISDN, set the menu setting of Telephone
Line Type to your telephone type. (See Setting the Telephone Line Type
on page 66.)
Sending Faxes
Difficulty Suggestions
Cannot send a fax. Check all line cord connections.
Make sure that the Fax key is illuminated. (See Entering Fax mode
on page 40.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports
on page 83.)
Transmission Verification Report
says ‘Result:ERROR’.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get
Result:ERROR on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can turn off Memory Receive (see Turning off Memory Receive Operations
on page 57), print fax messages in memory (see Memory Receive (Monochrome
only) on page 54) or cancel a Delayed Fax or Polling Job (see Cancelling a fax in
progress on page 42 or Checking and cancelling waiting jobs on page 47). If the
problem continues, ask the telephone company to check your telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the menu setting of Compatibility to Basic(for VoIP). (See
Telephone line interference on page 143.)
If you connect your machine to PBX or ISDN, set the menu setting of Telephone Line
Type to your telephone type. (See
Setting the Telephone Line Type on page 66
.)
140
Poor fax send quality. Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner glass on page 161.)
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 161.)
Handling Incoming Calls
Difficulty Suggestions
The machine ‘Hears’ a voice as a
CNG Tone.
If Fax Detect is set to on, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling and
respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit
.
Try avoiding this problem by turning Fax Detect to off. (See
Fax Detect
on page 52.)
Sending a fax call to the machine.
If you answered on an external or extension telephone, press your Remote
Activation Code (the factory setting is
l
5 1
). When your machine answers, hang up.
Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, an alarm system or other custom
feature on a single telephone line with your machine, it may create a problem
sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM (Error
Correction Mode) feature should help overcome this problem. This condition is
related to the telephone system industry and is common to all devices that send
and receive information on a single, shared line with custom features. If avoiding
a slight interruption is crucial to your business, a separate telephone line with no
custom features is recommended.
Copying Difficulties
Difficulty Suggestions
Cannot make a copy.
Make sure that the Copy key is illuminated. (See Entering Copy mode
on page 88.)
Poor copy results when using the
ADF.
Try using the scanner glass. (See Using the scanner glass on page 23.)
Vertical black lines or streaks
appear in copies.
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 161.)
Fit to Page does not work properly.
Make sure your source document is not skewed. Reposition the document and try again.
Scanning Difficulties
Difficulty Suggestions
TWAIN/WIA errors appear when
starting to scan.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
PaperPort™ 11SE with OCR, click File, Scan or Get Photo and click Select to
choose the Brother TWAIN/WIA driver.
Sending Faxes (continued)
Difficulty Suggestions
Troubleshooting and Routine Maintenance
141
B
TWAIN or ICA errors appear when
starting to scan. (Macintosh)
Make sure the Brother TWAIN driver is chosen as the primary source.
In PageManager, click File, Select Source, TWAIN and choose the Brother
TWAIN driver.
Mac OS X 10.6.x users can also scan documents using the ICA Scanner Driver.
See Scanning a document using the ICA driver (Mac OS X 10.6.x) in the Software
User’s Guide.
Poor scanning results when using
the ADF.
Try using the scanner glass. (See Using the scanner glass on page 23.)
OCR does not work. Try increasing the scanner resolution.
Software Difficulties
Difficulty Suggestions
Cannot install software or print. Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Device Busy Make sure the machine is not showing an error message on the LCD.
Cannot print images from
FaceFilter Studio.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the CD-ROM supplied with your machine. To install FaceFilter Studio see the
Quick Setup Guide.
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned On, and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.
PhotoCapture CenterDifficulties
Difficulty Suggestions
Removable Disk does not work
correctly.
1 Have you installed the Windows
®
2000 update? If not, do the following:
1) Unplug the USB cable.
2) Install the Windows
®
2000 update using one of the following methods.
Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup Guide.)
Download the latest service pack from the Microsoft Web site.
3)
Wait about 1 minute after you restart the PC, and then connect the USB cable.
2 Take out the memory card or USB Flash memory drive and put it back in
again.
3 If you have triedEject’ from within Windows
®
, take out the memory card or
USB Flash memory drive before you continue.
4 If an error message appears when you try to eject the memory card or USB
Flash memory drive, it means the card is being accessed. Wait a while and
then try again.
5
If all of the above do not work, turn off your PC and machine, and then turn them
on again. (You will have to unplug the power cord of the machine to turn it off.)
Cannot access Removable Disk
from Desktop icon.
Make sure that you have correctly inserted the memory card or USB Flash
memory drive.
Part of my photo is missing when
printed.
Make sure that Borderless Printing and Cropping are turned off. (See Borderless
printing on page 113, and Cropping on page 113.)
Scanning Difficulties (continued)
Difficulty Suggestions
142
Network Difficulties
Difficulty Suggestions
Cannot print over the Network. Make sure that your machine is powered on, is online and in Ready mode. Print a
Network Configuration list (see Reports on page 83.) and check the current
Network settings printed in this list. Reconnect the LAN cable to the hub to verify
that the cabling and network connections are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
(If you are having Network problems, see the Network User’s Guide for more
information.)
The network scanning feature does
not work.
(For Windows
®
users only) Firewall settings on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure the
Firewall. If you are using personal Firewall software, see the User’s Guide for your
software or contact the software manufacturer.
For Windows
®
XP SP2, Windows Vista
®
and Windows
®
7 users, see Firewall
settings in the Software User’s Guide on the CD-ROM.
For Windows
®
XP SP1 users, please visit the Brother Solutions Center.
(http://solutions.brother.com)
The network PC-Fax Receive
feature does not work.
Your computer cannot find your
machine.
<Windows
®
users>
Firewall settings on you PC may be rejecting the necessary network connection.
For detail, see the instruction above.
<Macintosh users>
Re-select your machine in the Device Selector application located in Macintosh
HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model list in
ControlCenter2.
Troubleshooting and Routine Maintenance
143
B
Dial Tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the factory No Detection setting.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose Dial Tone.
d Press d or c to choose Detection or
No Detection.
Press OK.
e Press Stop/Exit.
Telephone line interference B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, you can change the
compatibility setting, which reduces the
modem speed to minimize errors.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c
Press
a
or
b
to choose
Miscellaneous
.
Press OK.
d
Press
a
or
b
to choose
Compatibility
.
e Press d or c to choose High, Normal or
Basic(for VoIP).
Basic(for VoIP) cuts the
modem speed to 9600 bps. Unless
interference is a recurring problem
on your telephone line, you may
prefer to use it only when needed.
Normal sets the modem speed at
14400 bps.
High increases the modem speed to
33600 bps. (factory setting)
Press OK.
f Press Stop/Exit.
Note
When you change the compatibility to
Basic(for VoIP), the ECM feature is
only available for colour fax sending.
144
Error and Maintenance messages B
As with any sophisticated office product, errors may occur and consumable items may need to be
replaced. If this happens, your machine identifies the error and shows an error message. The
most common error and maintenance messages are shown below.
You can correct most errors and routine maintenance by yourself. If you need more help, the
Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com
.
Error Message Cause Action
B&W Print Only One or more of the colour ink
cartridges is empty.
While this message appears on
the LCD, each operation works in
the following way:
Printing
If you click Greyscale in the
Advanced tab of the printer
driver you can use the
machine as a monochrome
printer for approximately four
weeks depending on the
number of pages you print.
Copying
If the paper type is set to
Plain Paper or
Inkjet Paper you can
make copies in monochrome.
Faxing
If the paper type is set to
Plain Paper,
Inkjet Paper or
Transparency the machine
will receive and print the faxes
in monochrome.
If a sending machine has a
colour fax, the machine’s
‘handshake’ will ask that the
fax be sent as monochrome.
If the paper type is set to
Other Glossy or
Brother BP71, the machine will
stop all print operations. If you
unplug the machine, or take out
the empty ink cartridge, you
cannot use the machine until you
change to a new ink cartridge.
Replace the empty ink cartridges. (See
Replacing the ink cartridges on page 157.)
Troubleshooting and Routine Maintenance
145
B
BT Call Sign On
(For U.K. only)
BT Call Sign is set to ON. You
cannot change the Receive Mode
from Manual to another mode.
Set BT Call Sign to OFF. (See BT Call Sign
(U.K. only) on page 66.)
Cannot Detect You installed a new ink cartridge
too quickly and the machine did
not detect it.
Take out the new ink cartridge and
re-install it slowly until it clicks.
If you are using non Brother
Original ink the machine may not
detect the ink cartridge.
Replace the cartridge with a Brother
Original ink cartridge. If the error message
remains, contact your Brother dealer.
An ink cartridge is not installed
correctly.
Take out the new ink cartridge and
re-install it slowly until it clicks. (See
Replacing the ink cartridges on page 157.)
Cannot Print One or more of the ink cartridges
are empty. The machine will stop
all print operations. While memory
is available, black and white faxes
will be stored in the memory. If a
sending machine has a colour fax,
the machine's
handshake will
ask that the fax be sent as
monochrome.
Replace the empty ink cartridges. (See
Replacing the ink cartridges on page 157.)
Comm.Error Poor telephone line quality
caused a communication error.
If the problem continues, call the
telephone company and ask them to check
your telephone line.
Connection Fail You tried to poll a fax machine
that is not in Polled Waiting mode.
Check the other fax machine's polling
setup.
Cover is Open The scanner cover is not closed
completely.
Lift the scanner cover and then close it
again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it
clicks.
Data Remaining Print data is left in the machine's
memory.
Press Stop/Exit. The machine will cancel
the job and clear it from the memory. Try to
print again.
Disconnected The other person or other
person's fax machine stopped the
call.
Try to send or receive again.
Document Jam The document was not inserted or
fed correctly, or the document
scanned from the ADF was too
long.
See Using the ADF on page 22.
See Document jam on page 151.
High Temperature The print head is too warm. Allow the machine to cool down.
Hub is Unusable. A Hub or USB Flash memory
drive with Hub has been
connected to the USB direct
interface.
A Hub or USB Flash memory drive with
Hub are not supported. Unplug the device
from the USB direct interface.
Error Message Cause Action
146
Image Too Long. The proportions of your photo are
irregular so effects could not be
added.
Choose a regularly proportioned image.
Image Too Small. The size of your photo is too small
to trim.
Choose a larger image.
Ink low One or more of the ink cartridges
are running out of ink. If a sending
machine has a colour fax to send,
your machine’s ‘handshake’ will
ask that the fax be sent as black
and white. If the sending machine
has the ability to convert it, the
colour fax will be printed at your
machine as a black and white fax.
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Replacing the ink
cartridges on page 157.)
Low Temperature The print head is too cold. Allow the machine to warm up.
Media Error The memory card is either
corrupted, incorrectly formatted,
or there is a problem with the
memory card.
Put the card firmly into the slot again to
make sure it is in the correct position. If the
error remains, check the media drive (slot)
of the machine by putting in another
memory card that you know is working.
Media is Full. The memory card or USB flash
memory drive you are using
already contains 999 files.
Your machine can only save to your
memory card or USB flash memory drive if
it contains less than 999 files. Try deleting
unused files to free some space and try
again.
No Caller ID There is no incoming call history.
You did not receive calls or you
have not subscribed to the Caller
ID service from your telephone
company.
If you want to use the Caller ID feature call
your telephone company. (See Caller ID
(U.K. and Ireland only) on page 65.)
No Cartridge An ink cartridge is not installed
correctly.
Take out the new ink cartridge and
re-install it slowly until it clicks. (See
Replacing the ink cartridges on page 157.)
No File The memory card or USB Flash
memory drive in the media drive
does not contain a .JPG file.
Put the correct memory card or USB Flash
memory drive into the slot again.
Error Message Cause Action
Troubleshooting and Routine Maintenance
147
B
No Paper Fed The machine is out of paper or
paper is not properly loaded in the
paper tray.
Do one of the following:
Refill the paper in the paper tray, and
then press Mono Start or
Colour Start.
Remove the paper and load it again
and then press Mono Start or
Colour Start.
The paper is jammed in the
machine.
Remove the jammed paper by following
the steps in Printer jam or paper jam
(MFC-5890CN and MFC-5895CW)
on page 152 or Printer jam or paper jam
(MFC-6490CW only) on page 154.
The jam clear cover
(MFC-5890CN and
MFC-5895CW) or the outer rear
cover or inner rear cover
(MFC-6490CW) may not be
closed properly.
(MFC-5890CN and MFC-5895CW)
Open the jam clear cover and then close it.
Make sure the jam clear cover is closed
properly.
(MFC-6490CW)
Open the outer rear cover and inner rear
cover. Then close the inner rear cover and
outer rear cover. Make sure they are
closed properly.
No Response/Busy The number you dialled does not
answer or is busy.
Verify the number and try again.
Not Registered You tried to access a One Touch
or Speed Dial number that is not
programmed.
Set up the One Touch or Speed Dial
number. (See Storing Speed Dial numbers
on page 76.)
Out of Memory The machine's memory is full. Fax sending or copy operation in
progress
Do one of the following:
Press Stop/Exit and wait until the other
operations in progress finish and then
try again.
Clear the data in the memory. To gain
extra memory, you can turn off Memory
Receive. (See Memory Receive
(Monochrome only) on page 54.)
Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 54.)
The memory card or USB flash
memory drive you are using does
not have enough free space to
scan the documents.
Delete unused files from your memory card
or USB Flash memory drive to make some
free space and then try again.
Error Message Cause Action
148
Paper Jam Paper is jammed in the machine. (MFC-6490CW)
Open the Outer Rear Cover and Inner
Rear Cover (at the back of the machine)
and remove the jammed paper. (See
Printer jam or paper jam (MFC-6490CW
only) on page 154.)
(MFC-5890CN and MFC-5895CW)
Open the Jam Clear Cover (at the back of
the machine) and remove the jammed
paper. (See Printer jam or paper jam
(MFC-5890CN and MFC-5895CW)
on page 152.)
Make sure the paper length guide is
adjusted to the correct paper size. Do not
extend the paper tray when you load A5 or
smaller size paper.
Unable to Clean XX The machine has a mechanical
problem.
OR
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, disconnect the
machine from the power for several
minutes, then reconnect it. (The machine
can be turned off for approximately 24
hours without losing faxes stored in the
memory. See Transferring your faxes or
Fax Journal report on page 150.)
Unable to Init. XX The machine has a mechanical
problem.
OR
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, disconnect the
machine from the power for several
minutes, then reconnect it. (The machine
can be turned off for approximately 24
hours without losing faxes stored in the
memory. See Transferring your faxes or
Fax Journal report on page 150.)
Unable to Print XX The machine has a mechanical
problem.
OR
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, disconnect the
machine from the power for several
minutes, then reconnect it. (The machine
can be turned off for approximately 24
hours without losing faxes stored in the
memory. See Transferring your faxes or
Fax Journal report on page 150.)
Error Message Cause Action
Troubleshooting and Routine Maintenance
149
B
Unable to Scan XX The machine has a mechanical
problem.
OR
A foreign object such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, disconnect the
machine from the power for several
minutes, then reconnect it. (The machine
can be turned off for approximately 24
hours without losing faxes stored in the
memory. See Transferring your faxes or
Fax Journal report on page 150.)
Unusable Device
Disconnect device from
front connector & turn
machine off & then on
A broken device has been
connected to the USB direct
interface.
Unplug the device from the USB direct
interface, then press Power Save to turn
the machine off and then on again.
Unusable Device
Please Disconnect
USB Device.
A USB device or USB Flash memory
drive that is not supported has been
connected to the USB direct interface.
(For more information, visit us at
http://solutions.brother.com.)
Unplug the device from the USB direct
interface.
Wrong Paper Size Paper is not the correct size. (MFC-5890CN and MFC-5895CW)
Check that the machine’s Paper Size
setting matches the size of paper in the
tray. (See Paper Size on page 27.)
(MFC-6490CW)
Make sure the machine’s Paper Size
setting matches the size of paper in the
tray. (See Paper Size and Type (MFC-
6490CW only) on page 27.)
Also, check that the machine is set to use
the tray with the paper size you want. (See
Tray use in Copy mode (MFC-6490CW
only) on page 28 and Tray use in Fax
mode (MFC-6490CW only) on page 28.)
Error Message Cause Action
150
Error animations Display B
Error animations display step-by-step
instructions when paper gets jammed. You
can read the steps at your own pace by
pressing c to see the next step and d to go
back. If you do not press a key after 1 minute
the animation starts running automatically
again.
Note
You can press d, c or OK to pause the
auto-animation and go back to step-by-
step mode.
Transferring your faxes or Fax
Journal report B
If the LCD shows:
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine
on page 150 or Transferring faxes to your PC
on page 150.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 151.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Enter
personal information (station ID) in the Quick
Setup Guide.)
a Press Stop/Exit to interrupt the error
temporarily.
b Press Menu.
c Press a or b to choose Service.
Press OK.
d Press a or b to choose
Data Transfer.
Press OK.
e Press a or b to choose Fax Transfer.
Press OK.
f Do one of the following:
If the LCD shows No Data, there
are no faxes left in the machine's
memory.
Press Stop/Exit.
Enter the fax number to which faxes
will be forwarded.
g Press Mono Start.
Transferring faxes to your PC B
You can transfer the faxes from your
machine's memory to your PC.
a Press Stop/Exit to interrupt the error
temporarily.
b Make sure you have installed MFL-Pro
Suite on your PC, and then turn on PC
FAX Receiving on the PC. (For details
see PC- FAX receiving for Windows
®
in
the Software User’s Guide on the
CD-ROM.)
Troubleshooting and Routine Maintenance
151
B
c Make sure you have set PC Fax
Receive on the machine. (See PC Fax
Receive on page 56.)
If faxes are in the machine’s memory
when you set up PC Fax Receive, the
LCD will ask if you want to transfer the
faxes to your PC.
d Do one of the following:
To transfer all faxes to your PC,
press 1. You will be asked if you want
a backup print.
To exit and leave the faxes in the
memory, press 2.
e Press Stop/Exit.
Transferring Fax Journal report to
another fax machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Enter
personal information (station ID) in the Quick
Setup Guide.)
a Press Stop/Exit to interrupt the error
temporarily.
b Press Menu.
c Press a or b to choose Service.
Press OK.
d Press a or b to choose
Data Transfer.
Press OK.
e Press a or b to choose
Report Trans.
Press OK.
f Enter the fax number to which Fax
Journal report will be forwarded.
g Press Mono Start.
Document jam B
Documents can jam in the ADF unit if they are
not inserted or fed properly, or if they are too
long. Follow the steps below to clear a
document jam.
Document is jammed in the top of the
ADF unit
B
a Take out any paper from the ADF that is
not jammed.
b Open the ADF cover.
c Pull the jammed document out to the
right.
d Close the ADF cover.
e Press Stop/Exit.
Note
To avoid document jams close the ADF
cover correctly by pushing it gently in the
middle.
152
Document is jammed inside the ADF
unit
B
a Take out any paper from the ADF that is
not jammed.
b Lift the document cover.
c Pull the jammed document out to the
right.
d Close the document cover.
e Press Stop/Exit.
Printer jam or paper jam
(MFC-5890CN and
MFC-5895CW) B
Take out the jammed paper depending on
where it is jammed in the machine. Open and
close the scanner cover to clear the error.
a Pull the paper tray (1) out of the
machine.
b Pull out the jammed paper (1) and press
Stop/Exit.
c Reset the machine by lifting the scanner
cover from the front of the machine and
then close it.
If you cannot remove the jammed
paper from the front side, or the error
message still appears on the LCD
after you remove the jammed paper,
please go to the next step.
1
1
Troubleshooting and Routine Maintenance
153
B
d Open the Jam Clear Cover (1) from the
back of the machine. Pull the jammed
paper out of the machine.
e Close the Jam Clear Cover back on.
Make sure the cover is set properly.
f Using both hands, use the finger holds
on both sides of the machine to lift the
scanner cover (1) until it locks securely
in the open position. Make sure that
there is no jammed paper left inside the
machine under the plastic covers.
Check both ends of the print carriage.
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Hold down Stop/Exit until
the print head moves to the middle. Then
unplug the machine from the power
source, and take out the paper.
If ink gets onto your skin, immediately
wash with soap and plenty of water.
1
1
154
g Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
h Push the paper tray firmly back into the
machine.
Note
Make sure you pull out the paper support
until it clicks.
Printer jam or paper jam
(MFC-6490CW only) B
Take out the jammed paper depending on
where it is jammed in the machine. Open and
close the scanner cover to clear the error.
a Pull the paper tray (1) out of the
machine.
1
1
Troubleshooting and Routine Maintenance
155
B
b Pull out the jammed paper (1) and press
Stop/Exit.
c Reset the machine by lifting the scanner
cover from the front of the machine and
then close it.
If you cannot remove the jammed
paper from the front side, or the error
message still appears on the LCD
after you remove the jammed paper,
please go to the next step.
d Open the Outer Rear Cover (1) from the
back of the machine. Pull the jammed
paper out of the machine.
1
1
1
156
e Close the Inner Rear Cover (1) if it is
open like the illustration below.
f Close the Outer Rear Cover.
Make sure the cover is closed correctly.
g Using both hands, use the finger holds
on both sides of the machine to lift the
scanner cover (1) into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Hold down Stop/Exit until
the print head moves to the middle. Then
unplug the machine from the power
source, and take out the paper.
If ink gets onto your skin, immediately
wash with soap and plenty of water.
1
1
Troubleshooting and Routine Maintenance
157
B
h Gently close the scanner cover (1) using
the finger holds on both sides of it.
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
both sides of the scanner cover when
opening and closing it.
i Push paper tray #1 and paper tray #2
firmly back into the machine.
Note
Make sure you pull out the paper support
until it clicks.
Routine maintenance B
Replacing the ink cartridges B
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the 4
cartridges. When the machine detects an ink
cartridge is running out of ink, the machine
will tell you with a message on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from drying out and
damaging the print head assembly.
CAUTION
Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance and reliability when
used with genuine Brother Branded ink
cartridges. Brother cannot guarantee this
optimum performance and reliability if ink or
ink cartridges of other specifications are
used. Brother does not therefore
recommend the use of cartridges other than
genuine Brother Branded cartridges or the
refilling of empty cartridges with ink from
other sources. If damage is caused to the
print head or other parts of this machine as
a result of using other brands of ink or ink
cartridges, any repairs required as a result
may not be covered by the warranty.
1
158
a Open the ink cartridge cover.
If one or more ink cartridges are empty,
for example Black, the LCD shows
Cannot Print.
b Press the lock release lever as shown to
release the ink cartridge indicated on
the LCD. Remove the cartridge from the
machine.
c Open the new ink cartridge bag for the
colour shown on the LCD, and then take
out the ink cartridge.
d Turn the green knob on the protective
yellow cap clockwise until it clicks to
release the vacuum seal, then remove
the cap (1).
e Each colour has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
Y
C
BK
Y
C
BK
1
Troubleshooting and Routine Maintenance
159
B
f Gently push the ink cartridge until it
clicks, and then close the ink cartridge
cover.
g The machine will automatically reset the
ink dot counter.
Note
If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it was a brand new one (for
example, Did You Change
Black). For each new cartridge you
installed, press 1 (Yes) to automatically
reset the ink dot counter for that colour. If
the ink cartridge you installed is not a
brand new one, be sure to press 2 (No).
If the LCD shows No Cartridge or
Cannot Detect after you install the ink
cartridges, check that the ink cartridges
are installed correctly.
WARNING
If ink gets in your eyes, wash them out with
water at once and call a doctor if you are
concerned.
CAUTION
DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink left
in the cartridge.
DO NOT touch the cartridge insertion slots.
If you do so, the ink may stain your skin.
If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
If you mix the colours by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting the
cartridge installation.
Once you open an ink cartridge, install it in
the machine and use it up within six months
of installation. Use unopened ink cartridges
by the expiration date written on the
cartridge package.
DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out
of the cartridge.
Y
C
BK
160
Cleaning the outside of the
machine B
CAUTION
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
Clean the outside of the machine as
follows:
B
a Pull the paper trays (1) completely out of
the machine.
b Wipe the outside of the machine with a
soft cloth to remove dust.
c Remove anything that is stuck inside the
paper tray.
d Wipe the paper trays with a soft cloth to
remove dust.
e Put the paper trays firmly back in the
machine.
1
1
Troubleshooting and Routine Maintenance
161
B
Cleaning the scanner glass B
a Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
b In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
Cleaning the machine printer
platen B
WARNING
Be sure to unplug the machine from the
electrical socket before cleaning the printer
platen.
a Using both hands, use the finger holds
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a soft, dry, lint-free
cloth.
1
3
2
1
2
1
162
Cleaning the paper pick-up
roller B
a Pull the paper trays completely out of
the machine.
b (MFC-5890CN and MFC-5895CW)
Unplug the machine from the electrical
socket and open the Jam Clear
Cover (1) at the back of the machine.
(MFC-6490CW)
Unplug the machine from the electrical
socket and open the Outer Rear
Cover (1) and Inner Rear Cover (2) from
the back of the machine.
c Clean the Paper Pick-up Roller (1) with
isopropyl alcohol on a cotton swab.
d (MFC-5890CN and MFC-5895CW)
Close the Jam Clear Cover properly.
(MFC-6490CW)
Close the Inner Rear Cover and the
Outer Rear Cover.
Make sure the cover is closed correctly.
e Put the paper trays firmly back in the
machine.
f Re-connect the power cord.
Cleaning the print head B
To maintain print quality, the machine will
automatically clean the print head. You can
start the cleaning process manually if there is
a print quality problem.
Clean the print head and ink cartridges if you
get a horizontal line or blank text in the text or
graphics on your printed pages. You can
clean Black only, three colours at a time
(Cyan/Yellow/Magenta), or all four colours at
once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
1
1
2
1
Troubleshooting and Routine Maintenance
163
B
a Press Ink Management.
b Press a or b to choose Cleaning.
Press OK.
c Press a or b to choose Black, Color or
All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to standby mode
automatically.
Note
If you clean the print head at least five
times and the print has not improved, try
installing a new genuine Brother Branded
replacement cartridge for each problem
colour. Try cleaning the print head again
up to five more times. If the print has not
improved call your Brother dealer.
Checking the print quality B
If faded or streaked colours and text appear
on your output, some of the nozzles may be
clogged. You can check this by printing the
Print Quality Check Sheet and looking at the
nozzle check pattern.
a Press Ink Management.
b Press a or b to choose Test Print.
Press OK.
c Press a or b to choose
Print Quality.
Press OK.
d Press Colour Start.
The machine begins printing the Print
Quality Check Sheet.
e Check the quality of the four colour
blocks on the sheet.
f The LCD asks you if the print quality is
OK.
Do one of the following:
If all lines are clear and visible, press
1 (Yes) to finish the Print Quality
check and go to step j.
If you can see missing short lines as
shown below, press 2 to choose No.
g The LCD asks you if the print quality is
OK for black and three colours.
Press 1 (Yes) or 2 (No).
h The LCD asks you if you want to start
cleaning.
Press 1 (Yes).
The machine starts cleaning the print
head.
i After cleaning is finished, press
Colour Start.
The machine starts printing the Print
Quality Check Sheet again and then
return to step e.
<Black>
OK Poor
<Colour>
OK Poor
164
j Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
colour.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call your Brother dealer.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
Note
Checking the print alignment B
You may need to adjust the print alignment
after transporting the machine, if your printed
text becomes blurred or images become
faded.
a Press Ink Management.
b Press a or b to choose Test Print.
Press OK.
c Press a or b to choose Alignment.
Press OK.
d Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
e Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
f Do one of the following:
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
step i.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
g For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
h For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
i Press Stop/Exit.
i
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.
Troubleshooting and Routine Maintenance
165
B
Checking the ink volume B
Although an ink volume icon appears on the
LCD, you can use the Ink Management key
to see a large graph showing the ink that is
left in each cartridge.
a Press Ink Management.
b Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh in the
Software User’s Guide on the CD-ROM.)
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b Press a or b to choose
Machine Info.
Press OK.
c Press a or b to choose Serial No.
Press OK.
d Press Stop/Exit.
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
properly pack your machine. Damage caused
to your machine during transit is not covered
by your warranty.
CAUTION
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a Open the ink cartridge cover.
b Press the lock release lever to release
the ink cartridge and take out all the ink
cartridges. (See Replacing the ink
cartridges on page 157.)
c Install the green protective part and then
close the ink cartridge cover.
166
CAUTION
Make sure that the plastic tabs on both
sides of the green protective part (1) have
securely clicked into place (2).
If you are not able to find the green
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
green protective part or the ink cartridges in
position. Shipping without them will cause
damage to your machine and may void your
warranty.
d Unplug the machine from the telephone
wall socket and take the telephone line
cord out of the machine.
e Unplug the machine from the electrical
socket and from the machine.
f (MFC-5890CN and MFC-5895CW)
Using both hands, use the finger holds
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
(MFC-6490CW)
Using both hands, use the finger holds
on both sides of the machine to lift the
scanner cover into the open position.
Then unplug the interface cable from the
machine, if it is connected.
g (MFC-5890CN and MFC-5895CW)
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3).
(MFC-6490CW)
Gently close the scanner cover using
the finger holds on both sides of it as you
push down on the Scanner Cover
Support (1).
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
both sides of the scanner cover when
opening and closing it.
1
2
1
Troubleshooting and Routine Maintenance
167
B
h Wrap the machine in the bag.
i Pack the machine and the printed
materials in the original carton with the
original packing material as shown
below. Do not pack the used ink
cartridges in the carton.
(MFC-5890CN and MFC-5895CW)
(MFC-6490CW)
j Close the carton and tape it shut.
168
C
On-screen
programming
C
Your machine is designed to be easy to
operate with LCD on-screen programming
using the menu keys. User-friendly
programming helps you take full advantage of
all the menu selections your machine has to
offer.
Since your programming is done on the LCD,
we have created step-by-step on-screen
instructions to help you program your
machine. All you need to do is follow the
instructions as they guide you through the
menu selections and programming options.
Menu table C
You can program your machine by using the
Menu table that begins on page 169. These
pages list the menu selections and options.
Memory storage C
Even if there is a power failure, you will not
lose the settings you have chosen using the
Menu key because they are stored
permanently. Also, you will not lose your
settings in the PhotoCapture, Fax and Copy
mode key menus if you have chosen
Set New Default. You may have to reset
the date and time.
Note
During a power failure the machine will
retain messages that are in the memory
for approximately 24 hours.
Mode and menu keys C
Menu and Features C
Access the main menu.
Press to access the temporary
settings for each mode.
a
b
Scroll through the current menu
level.
d
Go back to the previous menu
level.
c Go to the next menu level.
Go to the next menu level.
Accept an option.
Cancel the current operation.
Go back to the previous menu
level.
Stop the current operation.
Menu and Features
169
C
Menu table C
The menu table will help you understand the menu selections and options that are found in the
machine's programs. The factory settings are shown in Bold with an asterisk.
Menu ( )
Level1 Level2 Level3 Options Descriptions Page
General Se tup Mode Timer Off
0Sec
30Secs
1Min
2Mins*
5Mins
Sets the time to return to
Fax mode.
26
Paper Type
(MFC-5890CN
and
MFC-5895CW)
Plain Paper*
Inkjet Paper
Brother BP71
Other Glossy
Transparency
Sets the type of paper in
the paper tray.
26
Paper Size
(MFC-5890CN
and
MFC-5895CW)
A4*
A5
A3
10x15cm
Letter
Legal
Ledger
Sets the size of the paper
in the paper tray.
27
The factory settings are shown in Bold with an asterisk.
170
General S etup
(Continued)
Tray Sett ing
(MFC-6490CW)
Tray#1 Paper Type
(Options)
Plain Paper*
Inkjet Paper
Brother BP71
Other Glossy
Transparency
Sets the size and type of
paper in paper tray #1.
27
Paper Size
(Options)
A4*
A5
A3
10x15cm
Letter
Legal
Ledger
27
Tray#2 Paper Type
(Option)
Plain Paper
Sets the size of the paper
in the paper tray #2.
27
Paper Size
(Options)
A4*
A3
Letter
Legal
Ledger
Tray Use:Copy
Tray#1*
Tray#2
Choose the tray that will
be used for Copy mode.
28
Tray Use: Fax Tray#1
Tray#2
Auto S elect*
Choose the tray that will
be used for Fax mode.
28
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
Menu and Features
171
C
General Se tup
(Continued)
Volume Ring Off
Low
Med*
High
Adjusts the ring volume. 29
Beeper Off
Low*
Med
High
Adjusts the volume level
of the beeper.
30
Speaker Off
Low
Med*
High
Adjusts the speaker
volume.
30
Auto Dayli ght On*
Off
Changes for Daylight
Savings Time
automatically.
30
P.Save Setting
Fax Receive:On
*
Fax Receive:Off
Customizes the
Power Save
key not to receive faxes in
power save mode.
25
LCD Settin gs LCD Contra st Light
Med*
Dark
Adjusts the contrast of the
LCD.
31
Backlight Li ght *
Med
Dark
You can adjust the
brightness of the LCD
backlight.
31
Dim Timer Off
10Secs
20Secs
30Secs*
You can set how long the
LCD backlight stays on for
after the last key press.
32
Wallpaper You can choose the
wallpaper of the LCD.
32
Sleep Mode 1Min
2Mins
3Mins
5Mins
10Mins*
30Mins
60Mins
You can choose how long
the machine will remain
idle before it goes into
sleep mode.
31
A3 - Short Grain
On*
Off
Turn on this setting when you
use A3 short grain paper.
29
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
172
General S etup
(Continued)
Function Lock Set Passw ord
Lock Off iOn
Setup Use r
Reset All Users
You can restrict selected
machine operation for up
to 20 restricted users and
all other non-authorized
Public users.
33
Fax Setup Rec eive Ring Delay 0
1
2*
3
4
5
6
7
8
(Example for the U.K.)
Sets the number of rings
before the machine
answers in Fax Only or
Fax/Tel mode.
51
F/T Ring Time
20Secs
30Secs*
40Secs
70Secs
Sets the pseudo/double-
ring time in Fax/Tel mode.
51
Fax Detec t On*
Off
Receives fax messages
without pressing the
Mono Start or
Colour Start key.
52
Remote Co des On*
( 51, #51)
Off
Allows you to answer all calls
at an extension or external
telephone and use codes to
turn the machine on or off. You
can personalize these codes.
70
Mono/Colour Mono(Max.A3)*
Colour(Max.A4)
Choose the receive
options for incoming faxes.
53
Auto Reduction
On*
Off
Cuts the size of incoming
faxes.
52
Memory Receive
Off*
Fax Forward
Fax Storage
PC Fax Receive
You can set the machine
to either forward fax
messages, store incoming
faxes in the memory (so
you can retrieve them
while you are away from
your machine), or send
faxes to your PC.
If you choose Fax Forward
or PC Fax Receive, you
can turn on the safety
feature Backup Print.
54
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
Menu and Features
173
C
Fax
(Continued)
Report Setting
XMIT Repor t
(MFC-5890CN
and
MFC-5895CW)
On
On+Image
Off*
Off+Image
Initial setup for
Transmission Verification
Report and Fax Journal
Report.
82
XMIT Repor t
(MFC-6490CW)
On
On+Image
Off*
Off+Image
Off2
Off2+Image
Journal Period
Off
Every 50 Faxes
*
Every 6 Hours
Every 12 Hours
Every 24 Hours
Every 2 Days
Every 7 Days
83
Print Document
Prints incoming faxes
stored in the memory.
54
Remote Acc ess
---
Set your own code for
Remote Retrieval.
60
Remaining Jobs
Check which jobs are in
the memory and lets you
cancel chosen jobs.
47
Miscellaneous
Compatibility
High*
Normal
Basic(for VoIP)
Adjusts the modem speed
to help resolve
transmission problems.
143
BT Call Sign
(U.K. Only)
On
Off*
Uses with BT Call Sign. 66
Caller ID
(U.K. and
Ireland only)
On*
Off
View or print a list of the
last 30 Caller IDs stored in
the memory.
65
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
174
Network menu
Level1 Level2 Level3 Level4 Options Descriptions
Network Wired LAN TCP/IP BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method
that best suits
your needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the
Gateway
address.
Node Name
BRNXXXXXXXXXXXX
Enter the Node
name.
WINS Config Auto*
Static
Chooses the
WINS
configuration
mode.
WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
Menu and Features
175
C
Network
(Continued)
Wired L AN
(Continued)
TCP/IP
(Continued)
IPv6 On
Off*
Enable or
Disable the IPv6
protocol. If you
want to use the
IPv6 protocol,
visit
http://solutions.
brother.com for
more information.
Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link
mode.
WLAN
(MFC-5895CW
and
MFC-6490CW)
TCP/IP BOOT Method Auto *
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method
that best suits
your needs.
IP Addr ess [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the
Gateway
address.
Node Na me
BRWXXXXXXXXXXXX
Enter the Node
name.
WINS Co nfig Auto*
Static
Chooses the
WINS
configuration
mode.
WINS Se rver (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
176
Network
(Continued)
WLAN
(MFC-5895CW
and
MFC-6490CW)
(Continued)
TCP/IP
(Continued)
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
IPv6 On
Off*
Sets the IPv6
protocol On.
Setup Wi zard You can
configure your
print server.
WPS/AOSS
(MFC-5895CW)
SES/WPS/AOSS
(MFC-6490CW)
You can easily
configure your
wireless network
settings using the
one-button push
method.
WPS w/PIN Code
You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
WLAN Sta tus Status You can see the
current wireless
network status.
Signal You can see the
current wireless
network signal
strength.
SSID You can see the
current SSID.
Comm. Mode You can see the
current
Communication
Mode.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
Menu and Features
177
C
Network
(Continued)
E-mail/IFAX
(MFC-6490CW)
(Available as a
download for
MFC-5890CN
and
MFC-5895CW)
Mail Addr ess Mail Address Enter the mail
address. (Up to
60 characters)
Setup Ser ver SMTP Server Name
(Up to 30 characters)
IP Address
[000-255]. [000
-
255].
[000
-
255]. [000
-
255]
Enter the SMTP
server address.
SMTP Po rt [00001-65535] Enter the SMTP
port number.
Auth. for SMTP
None
SMTP-AUTH
POP bef.SMTP
Selects the
Security method
for E-mail
notification
POP3 Se rver Name
(Up to 30 characters)
IP Address
[000-255]. [000
-
255].
[000
-
255]. [000
-
255]
Enter the POP3
server address.
POP3 Po rt [00001-65535] Enter the POP3
port number.
Mailbox Name Enter the mail
box name. (Up to
20 characters)
Mailbox Pwd Enter the
password to login
to the POP3
server. (Up to 20
characters)
APOP On
Off*
Enables or
disables APOP.
Setup Mail RX
Auto Po lling On *
Off
Automatically
checks the POP3
server for new
messages.
Poll Frequency
10Min(s) Sets the interval
for checking for
new messages
on the POP3
server.
Header All
Subject+From+To
None*
Selects the
contents of the
mail header to be
printed.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
178
Network
(Continued)
E-mail/IFAX
(MFC-6490CW)
(Available as a
download for
MFC-5890CN
and
MFC-5895CW)
(Continued)
Setup Mail RX
(Continued)
Del Error Mail
On*
Off
Deletes error
mails
automatically.
Notification On
MDN
Off*
Receives
notification
messages.
Setup Mail TX Sender Subject
Displays the
subject that is
attached to the
Internet Fax data.
Size Limit On
Off*
Limits the size of
E-mail
documents.
Notification On
Off*
Sends notification
messages.
Setup Re lay Rly Broadcast On
Off*
Relays a
document to
another fax
machine over the
internet.
Relay Domai n Registers the
Domain name.
Relay Repor t On
Off*
Prints the Relay
Broadcast Report.
Scan t o FTP Passive Mode Off
On*
You can set
Passive Mode to
OFF or ON
depending on
your FTP server
and network
firewall
configuration.
Port Num ber You can change
the port number
used to access
the FTP server.
File Nam e1 In addition to the
seven preset file
names, you can
store two user
defined file
names that can
be used for
creating an FTP
Server Profile.
File Nam e2 ——
Setup Profile Not Registered
You can setup
your FTP Profile.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
Menu and Features
179
C
Network
(Continued)
Time Zo ne
(MFC-6490CW)
(Available as a
download for
MFC-5890CN
and
MFC-5895CW)
UTC+XX:XX Sets the time
zone for your
country.
Network I/F
(MFC-5895CW
and
MFC-6490CW)
Wired LAN*
WLAN
You can choose
the network
connection type.
Factory Rese t —— Yes
No
Restores all
wired and
wireless network
settings to the
factory default.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.
180
Menu ( ) (continued)
Level1 Level2 Level3 Options Descriptions Page
Print Rep orts XMIT Verify Prints these lists and
reports.
83
Help List ——
Quick Dia l Alphabetical
Order
Numerical Order
Fax Journ al ——
User Sett ings ——
Network Config
——
Caller ID hist.
——
Machine I nfo. Serial No. Lets you check the serial
number of your machine.
165
Initial S etup Receive Mode Fax Only*
Fax/Tel
External TAD
Manual
Choose the receive mode
that best suits your needs.
49
Date&Time Puts the date and time on
the LCD and in headings
of faxes you send.
See
Quick
Setup
Guide.
Station I D Fax:
Name:
Set your name and fax
number to appear on each
page you fax.
Tone/Pulse Tone*
Pulse
Choose the dialling mode.
Dial Tone Detection
No Det ection*
Turns Dial Tone Detection
on or off.
143
Phone Line Set
Normal*
PBX
ISDN
Choose the telephone line
type.
66
The factory settings are shown in Bold with an asterisk.
Menu and Features
181
C
Fax ( )
Level1 Level2 Level3 Options Descriptions Page
Fax Resolution
——Standard*
Fine
S.Fine
Photo
Sets the resolution for
outgoing faxes.
45
Contrast ——Auto*
Light
Dark
Changes the lightness or
darkness of faxes you send.
45
Glass ScanSize
(MFC-6490CW)
——A4*
A3
Letter
Legal
Ledger
Sets the glass scan size to
Fax.
42
Phone Book Search
Alphabetical
Order
Numerical Order
You can dial by pressing only
a few keys (and Start).
73
Set One Touch
Dial
Stores One Touch numbers,
so you can dial by pressing
only a few keys (and Start).
74
Set Speed Dial
Stores Speed Dial numbers,
so you can dial by pressing
only a few keys (and Start).
76
Setup G roups Sets up a Group number for
Broadcasting.
79
Outgoing C all Send a fax
Add To Phone
Book
Delete
You can choose a number
from the Outgoing Call
history and then make a
telephone call to it, send a
fax to it, add it to Speed Dial,
or delete it.
73
Caller ID hist.
(For U.K. and
Ireland only)
Send a fax
Add To Phone
Book
Delete
You can choose a number
from the Caller ID history and
then send a fax to it, add it to
Speed Dial, or delete it.
74
Broadcasting Add Num ber
Phone B ook
Complete
You can send the same fax
message to more than one
fax number.
43
Delayed Fa x ——On (00:00)
Off*
Sets the time of day in
24-hour format that the
delayed faxes will be sent.
46
The factory settings are shown in Bold with an asterisk.
182
Batch TX ——On
Off*
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission.
47
Real Time TX ——On
Off*
You can send a fax without
using the memory.
46
Polled TX ——Standard
Secure
Off*
Sets up the document on
your machine to be retrieved
by another fax machine.
86
Polling R X ——Standard
Secure
Timer
Off*
Sets up your machine to poll
another fax machine.
84
Overseas Mode ——On
Off*
If you are having difficulty
sending faxes overseas, set
this to On.
46
Glass ScanSize
(MFC-5890CN
and
MFC-5895CW)
——A4*
Letter
Adjust the scan area of the
scanner glass to the size of
the document.
41
Set New Default
——Yes
No
You can save your fax
settings.
47
Factory R eset ——Yes
No
You can restore all settings
to the factory settings.
47
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
Menu and Features
183
C
Scan ( )
Level1 Option1 Option2 Option3 Descriptions Page
Scan to E-mail
PC You can scan a monochrome
or a colour document into
your E-mail application.
See
Software
User's
Guide
on the
CD-ROM.
E-mail Ser ver
(MFC-6490CW)
(Available as a
download for
MFC-5890CN and
MFC-5895CW)
Phone Bo ok
Alphabetical
Order
Numerical Order
You can search E-mail
addresses you have stored in
your machine.
Quality
Color 150 dpi
*
Color 300 dpi
Color 600 dpi
B/W 200x100 dpi
B/W 200 dpi
Chooses the file format to
send the scanned data via
E-mail server.
File Typ e (If you chose
colour option in
Quality setting)
PDF*
JPEG
(If you chose
Mono option in
Quality setting)
PDF*
TIFF
Glass ScanSize
(MFC-6490CW)
A4*
A3
Letter
Legal
Ledger
Sets the glass scan size to
Scan.
Set New Default
Yes
No
You can save your scan
settings.
Factory Reset
Yes
No
You can restore all settings to
the factory settings.
Scan to Image
You can scan a colour picture
into your graphics
application.
Scan to OCR You can have your text
document converted to an
editable text file.
Scan to File You can scan a monochrome
or a colour document into
your computer.
The factory settings are shown in Bold with an asterisk.
184
Scan to Media
(when a memory
card or USB
Flash memory
drive is inserted)
Quality
Color 150 dpi
*
Color 300 dpi
Color 600 dpi
B/W 200x100 dpi
B/W 200 dpi
You can choose the scan
resolution, file format and
enter a file name for your
document.
114
File Type (If you chose
colour option in
Quality setting)
PDF*
JPEG
(If you chose
Mono option in
Quality setting)
PDF*
TIFF
Glass Sca nSize
(MFC-6490CW)
A4*
A3
Letter
Legal
Ledger
Sets the glass scan size to
Scan.
116
File Name You can rename the file. 116
Set New Default
Yes
No
You can save your scan
settings.
116
Factory R eset Yes
No
You can restore all settings to
the factory settings.
116
Level1 Option1 Option2 Option3 Descriptions Page
The factory settings are shown in Bold with an asterisk.
Menu and Features
185
C
Scan to FTP (Profile Name) Enter the name that you want
to use for the profile of the
FTP server. This name will be
displayed on the LCD screen.
See
Software
User's
Guide
on the
CD-ROM.
Manual Qu ality
Color 150 dpi
*
Color 300 dpi
Color 600 dpi
B/W 200x100 dpi
B/W 200 dpi
Chooses the file format to
send the scanned data via
Media.
File Typ e (If you chose
colour option in
Quality setting)
PDF*
JPEG
(If you chose
Mono option in
Quality setting)
PDF*
TIFF
Glass ScanSize
(MFC-6490CW)
A4*
A3
Letter
Legal
Ledger
Sets the glass scan size to
Scan.
File Nam e You can rename the file.
Set New Default
Yes
No
You can save your scan
settings.
Factory Reset
Yes
No
You can restore all settings to
the factory settings.
Level1 Option1 Option2 Option3 Descriptions Page
The factory settings are shown in Bold with an asterisk.
186
Copy ( )
Level1 Level2 Level3 Options Descriptions Page
Quality ——Fast
Normal*
Best
Choose the Copy resolution
for your type of document.
89
Enlarge/Reduce
100%* ——— 89
Enlarge
198% 10x15cm
i
A4
186%10x15cm
i
LTR
142% A4iA3,
A5iA4
You can choose the
enlargement ratio for your
type of document.
89
Reduce 97% LTRiA4
93% A4iLTR
83% LGLiA4
69% A3iA4
(MFC-6490CW),
A4iA5
47%
A4i10x15cm
You can choose the
reduction ratio for your type
of document.
89
Fit to Page Your machine will adjust
the size automatically to the
paper size you set.
89
Custom(25-400%)
You can choose the
enlargement or reduction
ratio for your type of
document.
89
Tray Sele ct
(MFC-6490CW)
——Tray#1*
Tray#2
Choose the tray that will be
used for Copy mode.
93
Paper Typ e ——Plain Pape r*
Inkjet Paper
Brother BP71
Other Glossy
Transparency
Choose the paper type that
matches the paper in the
tray.
93
Paper Siz e ——A4*
A5
A3
10x15cm
Letter
Legal
Ledger
Choose the paper size that
matches the paper in the
tray.
93
The factory settings are shown in Bold with an asterisk.
Menu and Features
187
C
Brightness ——
Adjusts the brightness of
copies.
92
Contrast ——
Adjusts the contrast of
copies.
93
Stack/Sort ——Stack*
Sort
You can choose to stack or
sort multiple copies.
92
Page Layou t Off(1 in 1)*
2in1(P)
2in1(L)
4in1(P)
4in1(L)
1to2
(MFC-6490CW)
Poster(2 x 2)
Poster(3 x 3)
(MFC-6490CW)
If you choose A3
or Ledger.
(When 2 in 1 is
chosen)
LGRx2 i LGRx1
LTRx2 i LGRx1
A3x2 i A3x1
A4x2 i A3x1
(When
Poster(2x2) is
chosen)
LGRx1 i LGRx4
LTRx1 i LGRx4
A4x1 i A3x4
A3x1 i A3x4
You can make N in 1,
1to2 or Poster copies.
90
Skew Adjustment
(MFC-6490CW)
——Auto*
Off
If your scanned copy is
skewed, your machine can
correct the data
automatically.
94
Book Copy On Corrects dark borders and
skew when copying from
the scanner glass.
94
On(Preview) Skew Adjustment
Shadow Revise
Off* ——
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
+2
+1
-1
-2
Light
Dark
+2
+1
-1
-2
188
Watermark Copy Watermark Copy
On
Off*
(If you choose On,
see the
watermark copy
settings in the
following table.)
You can place a logo or text
into your document as a
Watermark.
95
Current Setting
Exit ——
Set New Default
——Yes
No
You can save your copy
settings.
96
Factory R eset ——Yes
No
You can restore all settings
to the factory settings.
96
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.
Menu and Features
189
C
Watermark Copy Settings
Option1 Option2 Option3 Option4 Descriptions Page
Template Text CONFIDENTIAL*
DRAFT
COPY
Places a text into your
document as a Watermark
using a template.
95
Position A
B
C
D
E*
F
G
H
I
Pattern
Size Small
Medium*
Large
Angle -90
-45*
0
45
90
Transparency -2
-1
0*
+1
+2
Colour Red
Orange
Yellow
Blue
Green
Purple
Black*
Apply
The factory settings are shown in Bold with an asterisk.
190
Media (Select image
from media)
Position A
B
C
D
E*
F
G
H
I
Pattern
Places a logo or text into
your document as a
Watermark using an image
from removable media.
95
Size Small
Medium*
Large
Angle -90
-45*
0
45
90
Transparency -2
-1
0*
+1
+2
Apply
Scan (Set watermark
document and
press Start.)
Transparency -2
-1
0*
+1
+2
Places a logo or text into
your document as a
Watermark using a
scanned image.
96
Apply
Option1 Option2 Option3 Option4 Descriptions Page
The factory settings are shown in Bold with an asterisk.
Menu and Features
191
C
Photo Capture ( )
Level1 Level2 Level3 Options Descriptions Page
View Photo (s) See the print
settings in the
following table.
You can preview your
photos on the LCD.
103
Print Inde x Layout Format
6 Images/Line
*
5 Images/Line
You can print a thumbnail
page.
104
Paper Typ e Plain Paper*
Inkjet Paper
Brother BP71
Other Glossy
Paper Siz e A4*
Letter
Print Phot os See the print
settings in the
following table.
You can print an individual
image.
105
Enhance Photos
Auto Co rrect
Enhance Skin -
Tone
Enhance Scenery
Remove Red-Eye
Monochrome
Sepia
You can adjust your photos
with these settings.
105
Search by Date
You can search your
photos from date.
108
Print All Photos
See the print
settings in the
following table.
You can print all photos in
your memory card or USB
Flash memory drive.
108
Slide Show The machine starts a Slide
Show of your photos.
108
Trimming You can trim your photo
and print a part of the
image.
109
The factory settings are shown in Bold with an asterisk.
192
Print Settings
Option1 Option2 Option3 Option4 Descriptions Page
Print Qua lity
(Not available for
DPOF printing)
Normal
Photo*
Choose the print quality. 111
Paper Typ e Plain Paper
Inkjet Paper
Brother BP71
Other G lossy*
Choose the paper type. 111
Paper Siz e 10 x15cm*
13x18cm
A4
A3
Letter
Ledger
(When A4 or
Letter is chosen)
8x10cm
9x13cm
10 x 15cm
13 x 18cm
15 x 20cm
Max. S ize*
Choose the paper and print
size.
111
Brightness
(Not available when
Enhance Photos
is chosen)
Adjusts the brightness. 112
Contrast
(Not available when
Enhance Photos
is chosen)
Adjusts the contrast. 112
Color Enh ance
(Not available when
Enhance Photos
is chosen)
On
Off*
White Balance
Adjusts the hue of the white
areas.
112
Sharpness
Enhances the detail of the
image.
Color Density
Adjusts the total amount of
colour in the image.
The factory settings are shown in Bold with an asterisk.
+2
+1
-1
-2
Light
Dark
+2
+1
-1
-2
+2
+1
-1
-2
+2
+1
-1
-2
+2
+1
-1
-2
Menu and Features
193
C
Phone Book ( )
Fax Preview ( )
Cropping On*
Off
Crops the image around the
margin to fit the paper size
or print size. Turn this
feature off if you want to
print whole images or
prevent unwanted
cropping.
113
Borderless On*
Off
Expands the printable area
to fit the edges of the paper.
113
Date Print
(Not available for
DPOF printing)
On
Off*
Prints the date on your
photo.
113
Set New Default
——Yes
No
You can save your print
settings.
114
Factory Re set ——Yes
No
You can restore all the
settings to factory settings.
114
Level1 Level2 Level3 Options Descriptions Page
Search ——Alphabetical
Order
Numerical Order
You can dial by pressing
only a few keys (and Start).
73
Set One Touch
Dial
Stores One Touch Dial
numbers, so you can dial by
pressing only a few keys
(and Start).
74
Set Speed Dial
———Stores Speed Dial
numbers, so you can dial by
pressing only a few keys
(and Start).
76
Setup Grou ps Sets up a Group number for
Broadcasting.
79
The factory settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Options Descriptions Page
Fax Preview ——On
Off*
You can view received
faxes (and faxes to be
sent), on the LCD.
58
The factory settings are shown in Bold with an asterisk.
Option1 Option2 Option3 Option4 Descriptions Page
The factory settings are shown in Bold with an asterisk.
194
Entering Text C
When you are setting certain menu selections, such as the Station ID, you may need to enter text
into the machine. Most dial pad keys have three or four letters printed on keys. The keys for 0, #
and l do not have printed letters because they are used for special characters.
By pressing the correct dial pad key repeatedly, you can access the character you want.
(MFC-6490CW only)
You can enter the lower case characters to set a E-mail address. Press Shift+3 to change
between upper case and lower case.
Inserting spaces C
To enter a space in a fax number, press c once between numbers. To enter a space in a name,
press c twice between characters.
Making corrections
C
If you entered an incorrect letter and want to change it, press d to move the cursor under the
incorrect character. Then press Clear/Back. Re-enter the correct character. You can also back
up and insert letters.
Repeating letters C
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor
to the right before you press the key again.
Special characters and symbols C
Press l, # or 0, repeatedly until you see the special character or symbol you want.
Press
Key
one
time
two
times
three
times
four
times
2 ABC2
3 DEF3
4 GH I 4
5 JKL5
6 MNO6
7 PQRS
8 TUV8
9 WXY Z
Press l for (space) ! ” # $ % & ’ ( ) + , - . / m
Press # for : ; < = > ? @ [ ] ^ _
Press 0 for Ä Ë Ö Ü À Ç È É 0
195
D
D
General D
1
Measured when the machine is connected to the USB interface.
2
When using ADF, single-side printing, resolution: standard / document: ISO/IEC 24712 printed pattern.
Specifications D
Printer Type Inkjet
Print Method Mono:
Colour:
Piezo with 94 2 nozzles
Piezo with 94 3 nozzles
Memory Capacity 64 MB
LCD (liquid crystal display) Wide 3.3 in. (84.6 mm) Colour LCD
Power Source AC 220 to 240V 50/60Hz
Power Consumption (MFC-5890CN)
Power Save Mode:
Sleep Mode:
Standby:
Operating:
(MFC-5895CW)
1
Off:
Sleep Mode:
Ready Mode:
Copying Mode:
(MFC-6490CW)
Power Save Mode:
Sleep Mode:
Standby:
Operating:
Average 0.8 W
Average 4.5 W
Average 6 W
Average 27 W
Approx. 0.8 W
Approx. 3.5 W
Approx. 6 W
Approx. 21 W
2
Average 0.9 W
Average 4.5 W
Average 6 W
Average 29 W
196
Dimension (MFC-5890CN and MFC-5895CW)
(MFC-6490CW)
485 mm
460 mm
408 mm
242 mm
574 mm
540 mm
543 mm
488 mm
323 mm
Specifications
197
D
1
This depends on printing conditions.
Weight (MFC-5890CN and
MFC-5895CW)
10.9 kg
(MFC-6490CW) 15.6 kg
Noise Operating:
L
PAm = 50 dB or less
1
Noise per ISO 9296 (MFC-5890CN and
MFC-5895CW)
Operating: L
WAd = 64.3 dB (A) (Mono)
L
WAd = 61.6 dB (A) (Colour)
(MFC-6490CW)
Operating: L
WAd = 64.1 dB (A) (Mono)
L
WAd = 55.2 dB (A) (Colour)
Office equipment with L
WAd > 63.0 dB (A) is not suitable for use
in rooms where people do primarily intellectual work. Such
equipment should be placed in separate rooms because of the
noise emission.
Temperature Operating:
Best Print Quality:
10 - 35 C
20 - 33 C
Humidity Operating:
Best Print Quality:
20 - 80% (without condensation)
20 - 80% (without condensation)
ADF
(automatic document feeder)
Up to 50 pages
Paper: 80 g/m
2
Document Size (MFC-5890CN and MFC-5895CW)
ADF Width: 148mm to 215.9 mm
ADF Length: 148mm to 355.6 mm
Scanner Glass Width: Max. 215.9 mm
Scanner Glass Length: Max. 297 mm
(MFC-6490CW)
ADF Width: 148 mm to 297 mm
ADF Length: 148 mm to 431.8 mm
Scanner Glass Width: Max. 297 mm
Scanner Glass Length: Max. 431.8 mm
198
Print media D
1
Use only transparencies recommended for inkjet printing.
2
For glossy paper or transparencies, we recommend removing printed pages from the output paper tray immediately
after they exit the machine to avoid smudging.
3
See Paper type and size for each operation on page 20.
Paper Input Paper Tray
Paper type:
Plain paper, inkjet paper (coated paper), glossy paper
2
,
transparencies
12
and envelopes
Paper size:
Ledger, A3, Letter, Legal, Executive, A4, A5, A6, JIS B4,
JIS B5, envelopes (commercial No.10, DL, C5, Monarch,
JE4), Photo 1015cm, Photo L, Photo 2L, Index card and
Post card
3
.
Width: 89 mm - 297 mm
Length: 127 mm - 431.8 mm
For more details, see Paper weight, thickness and
capacity on page 21.
Maximum paper tray capacity:
Approx. 150 sheets of 80 g/m
2
plain paper
Paper Tray #2 (MFC-6490CW only)
Paper type:
Plain paper
Paper size:
Ledger, A3, Letter, Legal, A4, JIS B5, JIS B4,EXE
Width: 182 mm - 297 mm
Length: 257 mm - 431.8 mm
For more details, see Paper weight, thickness and
capacity on page 21.
Maximum paper tray capacity:
Approx. 250 sheets of 80 g/m
2
plain paper
Paper Output Up to 50 sheets of A4 plain paper (face up print delivery to
the output paper tray)
2
Specifications
199
D
Fax D
1
Monochrome only
2
Pagesrefers to the ‘Brother Standard Chart No. 1’ (a typical business letter, Standard resolution, MMR code).
Specifications and printed materials are subject to change without prior notice.
3
‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical business letter, Standard resolution, MMR code). Specifications
and printed materials are subject to change without prior notice.
Compatibility ITU-T Super Group 3
Modem Speed Automatic Fallback
33600 bps
Scanning Width (MFC-5890CN and MFC-5895CW)
208 mm (Letter paper)
204 mm (A4 paper)
(MFC-6490CW)
288 mm
Printing Width 291 mm
Greyscale 256 levels
Resolution Horizontal 8 dot/mm
Vertical
Standard
3.85 line/mm (Mono)
7.7 line/mm (Colour)
Fine
7.7 line/mm (Mono/Colour)
Photo
7.7 line/mm (Mono)
Superfine
15.4 line/mm (Mono)
One Touch Dial 6 (3 2)
Speed Dial 80 stations 2 numbers (MFC-5890CN and MFC-5895CW)
100 stations 2 numbers (MFC-6490CW)
Groups Up to 6
Broadcasting
1
216 stations (MFC-5890CN and MFC-5895CW)
256 stations (MFC-6490CW)
Automatic Redial 3 times at 5 minute intervals
Memory Transmission Up to 480
2
/400
3
pages
Out of Paper Reception Up to 480
2
/400
3
pages
200
Copy D
Colour/Monochrome Yes/Yes
Copy Width (MFC-5890CN and MFC-5895CW)
Max. 210 mm
(MFC-6490CW)
Max. 291 mm
Resolution Prints up to 12001200 dpi
Specifications
201
D
PhotoCapture Center™ D
1
Memory cards, adapters and USB Flash memory drive are not included.
2
16MB to 2GB
3
4GB to 32GB
4
xD-Picture Card™ Conventional Card from 16MB to 512MB
xD-Picture Card™ Type M from 256MB to 2GB
xD-Picture Card™ Type M
+
1GB and 2GB
xD-Picture Card™ Type H from 256MB to 2GB
5
USB 2.0 Standard
USB Mass Storage standard from 16MB to 32GB
Support format: FAT12/FAT16/FAT32
6
Progressive JPEG format is not supported.
7
See Paper type and size for each operation on page 20.
Compatible Media
1
CompactFlash
®
(Type I only)
(Microdrive™ is not compatible)
(Compact I/O cards such as Compact LAN card and
Compact Modem card are not supported.)
Memory Stick™
Memory Stick PRO™
Memory Stick Duo™ with adapter
Memory Stick Micro™ (M2™) with adapter
SD
2
SDHC
3
microSD with adapter
miniSD™ with adapter
xD-Picture Card™
4
USB Flash memory drive
5
Resolution Up to 1200 2400 dpi
File Extension
(Media Format) DPOF, EXIF, DCF
(Image Format)
Photo Print: JPEG
6
Scan to Media: JPEG, PDF (Colour)
TIFF, PDF (Mono)
Number of Files Up to 999 files
(The folder inside memory cards or USB Flash memory drive
is also counted)
Folder File must be stored in the 4th folder level of the memory card
or USB Flash memory drive.
Borderless Ledger, A3, Letter, A4, Photo (1015 cm),
Photo 2L (1318 cm)
7
202
PictBridge D
Compatibility Supports the Camera & Imaging Products Association
PictBridge standard CIPA DC-001.
Visit http://www.cipa.jp/pictbridge for more information.
Interface USB direct interface
Specifications
203
D
Scanner D
1
For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com.
2
Windows
®
XP in this User’s Guide includes Windows
®
XP Home Edition, Windows
®
XP Professional, and Windows
®
XP Professional x64 Edition.
3
Maximum 1200 1200 dpi scanning when using the WIA Driver for Windows
®
XP, Windows Vista
®
and Windows
®
7
(resolution up to 19200 19200 dpi can be selected by using the Brother scanner utility)
Colour/Monochrome Yes/Yes
TWAIN Compliant (MFC-5890CN and MFC-6490CW)
Yes (Windows
®
2000 Professional/XP/XP Professional x64
Edition/Windows Vista
®
)
Mac OS X 10.2.4 - 10.3.x - 10.4.x - 10.5.x
(MFC-5895CW)
Yes (Windows
®
2000 Professional/Windows
®
XP/
Windows
®
XP Professional x64 Edition/Windows Vista
®
/
Windows
®
7)
Mac OS X 10.4.11 - 10.5.x - 10.6.x
1
WIA Compliant (MFC-5890CN and MFC-6490CW)
Yes (Windows
®
XP
2
/Windows Vista
®
)
(MFC-5895CW)
Yes (Windows
®
XP
2
/Windows Vista
®
/Windows
®
7)
ICA Compliant (MFC-5895CW) Yes (Mac OS X 10.6.x)
Colour Depth 48 bit colour Processing (Input)
24 bit colour Processing (Output)
(Actual Input: 30 bit colour/Actual Output: 24 bit colour)
Resolution Up to 19200 19200 dpi (interpolated)
3
Up to 1200 2400 dpi (optical) (Scanner Glass)
Up to 1200 600 dpi (optical) (ADF)
Scanning Speed (MFC-5890CN and MFC-5895CW)
Monochrome: up to 3.44 sec.
Colour: up to 4.83 sec.
(MFC-6490CW)
Monochrome: up to 3.39 sec.
Colour: up to 4.49 sec.
(A4 size at 100 100 dpi)
Scanning Width (MFC-5890CN and MFC-5895CW) 210 mm
(MFC-6490CW) Up to 291 mm
Greyscale 256 levels
204
Printer D
1
When you set the Borderless feature to On.
2
See Paper type and size for each operation on page 20.
Resolution Up to 1200 6000 dpi
Printing Width
291 mm (297 mm)
1
(A3 size)
Borderless
Ledger, A3, Letter, A4, A6, B4, Photo (10
15 cm),
Photo L (89
127 mm), Photo 2L (13
18 cm),
Index Card, Post Card
2
Specifications
205
D
Interfaces D
1
Your machine has a Hi-speed USB 2.0 interface. The machine can also be connected to a computer that has a USB
1.1 interface.
2
Third party USB ports are not supported for Macintosh.
3
See the Network User's Guide for detailed network specifications.
USB
12
A USB 2.0 interface cable that is no longer than 2.0 m.
LAN cable
3
Ethernet UTP cable category 5 or greater.
Wireless LAN
(MFC-5895CW and
MFC-6490CW)
IEEE 802.11b/g (Infrastructure/Ad-hoc Mode)
206
Computer requirements
(MFC-5890CN and MFC-6490CW)
D
SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS
Computer Platform &
Operating System
Version
Supported
PC Software
Functions
PC
Interface
Processor
Minimum
Speed
Minimum
RAM
Recommended
RAM
Hard Disk Space to install
For
Drivers
For
Applications
Windows
®
Operating
System
1
2000
Professional
5
Printing,
PC Fax
4
,
Scanning,
Removable
Disk
USB,
10/100
BaseTx
(Ethernet),
Wireless
802.11b/g
(MFC-
6490CW
only)
Intel
®
Pentium
®
II
or equivalent
64 MB 256 MB 110 MB 340 MB
XP Home
25
XP
Professional
25
128 MB 110 MB 340 MB
XP
Professional
x64 Edition
2
64-bit (Intel
®
64
or AMD64)
supported CPU
256 MB 512 MB 110 MB 340 MB
Windows
Vista
®2
Intel
®
Pentium
®
4
or equivalent
64-bit (Intel
®
64
or AMD64)
supported CPU
512 MB 1 GB 600 MB 530 MB
Macintosh
Operating
System
6
Mac OS X
10.2.4 - 10.4.3
Printing, PC
Fax Send
4
,
Scanning,
Removable
Disk
USB
3
,
10/100
BaseTx
(Ethernet),
Wireless
802.11b/g
(MFC-
6490CW
only)
PowerPC
G4/G5
PowerPC
G3 350MHz
128 MB 256 MB 80 MB 400 MB
Mac OS X
10.4.4 -
10.4.11
10.5.x
PowerPC
G4/G5
Intel
®
Core
Processor
512 MB 1 GB
Mac OS X
10.6.x
7
Intel
®
Core
Processor
1GB 2GB
Conditions:
1
Microsoft
®
Internet Explorer
®
5.5 or greater.
2
For WIA, 1200 x 1200 resolution. Brother Scanner
Utility enables to enhance up to 19200 x 19200 dpi.
3
Third party USB ports are not supported.
4
PC Fax supports black and white only, and does
not support Ledger/A3 size paper.
5
PaperPort
11SE supports Microsoft
®
SP4 or
higher for Windows
®
2000 and SP2 or higher for XP.
6
Presto! PageManager on the CD-ROM supports
Mac OS X 10.3.9 or higher. For Mac OS X 10.2.4-
10.3.8 Presto! PageManager is available as a
download from the Brother Solutions Center.
7
Software drivers for Mac OS X 10.6.x are
available at http://solutions.brother.com
.
For the latest driver updates, visit
http://solutions.brother.com/
All trademarks, brand and product names are
property of their respective companies.
Specifications
207
D
Computer requirements (MFC-5895CW) D
SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS
Computer Platform &
Operating System Version
Supported
PC Software
Functions
PC
Interface
Processor
Minimum
Speed
Minimum
RAM
Recommended
RAM
Hard Disk Space to install
For
Drivers
For
Applications
Windows
®
Operating
System
1
Windows
®
2000
Professional
5
Printing,
PC Fax
4
,
Scanning,
Removable
Disk
USB,
10/100
Base-TX
(Ethernet),
Wireless
802.11b/g
Intel
®
Pentium
®
II
or equivalent
64 MB
256 MB 110 MB 340 MB
Windows
®
XP Home
25
Windows
®
XP
Professional
25
128 MB 110 MB 340 MB
Windows
®
XP Professional
x64 Edition
2
64-bit (Intel
®
64 or
AMD64) supported CPU
256 MB 512 MB 110 MB 340 MB
Windows Vista
®2
Intel
®
Pentium
®
4 or equivalent
64-bit (Intel
®
64 or
AMD64)
supported CPU
512 MB
1GB
600 MB 530 MB
Windows
®
7
2
1GB
(32 bit)
2GB
(64 bit)
1GB
(32 bit)
2GB
(64 bit)
650 MB 530 MB
Windows Server
®
2003
(print only via network)
Printing
10/100
Base-TX
(Ethernet),
Wireless
802.11b/g
Intel
®
Pentium
®
III
or equivalent
256 MB 512 MB
50 MB N/A
Windows Server
®
2003
x64 Edition (print only via
network)
64-bit (Intel
®
64
or AMD64)
supported CPU
Windows Server
®
2003
R2 (print only via network)
Intel
®
Pentium
®
III
or equivalent
Windows Server
®
2003 R2 x64 Edition
(print only via network)
64-bit (Intel
®
64
or AMD64)
supported CPU
512 MB
1GB
Windows Server
®
2008
(print only via network)
Intel
®
Pentium
®
4 or
equivalent 64-bit
(Intel
®
64 or AMD64)
supported CPU
2GB
Windows Server
®
2008
R2 (print only via network)
64-bit (Intel
®
64 or
AMD64) supported CPU
Macintosh
Operating
System
Mac OS X
10.4.11, 10.5.x
Printing,
PC Fax
Send
4
,
Scanning,
Removable
Disk
USB
3
10/100
Base-TX
(Ethernet),
Wireless
802.11b/g
PowerPC G4/G5
Intel
®
Core
Processor
512 MB
1GB 80MB
400 MB
Mac OS X 10.6.x
Intel
®
Core
Processor
1GB 2GB
Conditions:
1
Microsoft
®
Internet Explorer
®
5.5 or greater.
2
For WIA, 1200
1200 resolution. Brother Scanner Utility
enables to enhance up to 19200
19200 dpi.
3
Third party USB ports are not supported.
4
PC Fax supports black and white only, and does not
support Ledger/A3 size paper.
5
PaperPort™11SE supports Microsoft
®
SP4 or higher for
Windows
®
2000 and SP2 or higher for XP.
For the latest driver updates, visit us at
http://solutions.brother.com/
All trademarks, brand and product names are
the property of their respective companies.
208
Consumable items D
Ink The machine uses individual Black, Yellow, Cyan and Magenta ink
cartridges that are separate from the print head assembly.
Service Life of Ink
Cartridge
Replacement Ink Cartridges
The first time you install a set of ink cartridges the machine will use
an amount of ink to fill the ink delivery tubes for high quality
printouts. This process will only happen once. With all following ink
cartridges you can print the specified number of pages.
For more information about the replacement consumables, visit us
at www.brother.com/pageyield
.
Replacement
Consumables
<Standard Black> LC1100BK, <High Yield Black> LC1100HY-BK
<Standard Cyan> LC1100C, <High Yield Cyan> LC1100HY-C
<Standard Magenta>LC1100M, <High Yield Magenta>LC1100HY-M
<Standard Yellow> LC1100Y, <High Yield Yellow> LC1100HY-Y
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and
"Bella" (meaning "Beautiful" in Italian) and is a representation of the
"innovative" technology providing you with "beautiful" and "long
lasting" print results.
When you print photo images, Brother recommends Innobella™
glossy photo paper (BP71 series) for high quality. Brilliant prints are
made easier with Innobella™ Ink and paper.
Specifications
209
D
Network (LAN) D
Note
For details about the full Network specifications, see the Network User’s Guide on the
CD-ROM.
1
See the Computer Requirements chart on page 206.
2
If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is
available as a download from http://solutions.brother.com
.
3
For MFC-5895CW and MFC-6490CW.
LAN You can connect your machine to a network for Network Printing,
Network Scanning, PC Fax Send, PC Fax Receive (Windows
®
only)
and Remote Setup
1
. Also included is Brother BRAdmin Light
2
Network Management software.
Wireless Network
Security
3
SSID/ESSID, 128 (104) / 64 (40) bit WEP, WPA/WPA2-PSK
(TKIP/AES)
Setup Support Utility
3
AOSS Yes
WPS Yes
SecureEasySetup™
(MFC-6490CW only)
Yes
210
E
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
Glossary E
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of an external telephone.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.
This is a safety feature so you will not lose
messages during a power failure.
Batch Transmission
(Black and white faxes only) As a cost
saving feature, all delayed faxes to the
same fax number can be sent as one
transmission.
Beeper Volume
Volume setting for the beep when you
press a key or make an error.
Brightness
Changing the Brightness makes the whole
image lighter or darker.
Broadcasting
The ability to send the same fax message
to more than one location.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JPEG, if the
receiving machine has the same
capability.
Colour Enhancement
Adjusts the colour in the image for better
print quality by improving sharpness,
white balance and colour density.
Communication error (Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Delayed Fax
Sends your fax at a specified time later.
Dual Access
Your machine can scan outgoing faxes or
scheduled jobs into memory at the same
time it is sending a fax from memory or
receiving or printing an incoming fax.
Glossary
211
E
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone using the same line as your
fax but plugged into a separate wall
socket.
External telephone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Fax Preview
If you choose Fax Preview you will be able
to view received faxes on the LCD by
pressing the Fax Preview key.
Fax Storage
You can store received faxes in memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying,
scanning and faxing photographs.
Group number
A combination of One Touch and
Speed Dial numbers that are stored on a
One Touch key or in a Speed Dial location
for Broadcasting.
Help list
A printout of the complete Menu table that
you can use to program your machine
when you do not have the User's Guide
with you.
Innobella
Innobella™ is a range of genuine
consumables offered by Brother. For best
quality results Brother recommends
Innobella™ Ink and Paper.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
LCD (liquid crystal display)
The display screen on the machine that
shows interactive messages during On-
Screen Programming and shows the date
and time when the machine is idle.
Manual fax
When you lift the handset of your external
telephone you can hear the receiving fax
machine answer before you press
Mono Start or Colour Start to begin
sending the fax.
Memory Receive
Receives faxes into the machine's
memory when the machine is out of paper.
Menu mode
Programming mode for changing your
machine's settings.
212
OCR (optical character recognition)
The bundled ScanSoft™
PaperPort™11SE with OCR or Presto!
PageManager software application
converts an image of text to text you can
edit.
One Touch
Keys on the machine’s control panel
where you can store numbers for easy
dialling. You can store a second number
on each key if you hold down Shift as you
press the One Touch key.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing One Touch and Speed Dial
numbers. Press Redial/Pause as many
times as needed for longer pauses.
Photo resolution (Mono only)
A resolution setting that uses varying
shades of grey for the best representation
of photographs.
PhotoCapture Center™
Allows you to print digital photos from your
digital camera at high resolution for photo
quality printing.
PictBridge
Allows you to print photos directly from
your digital camera at high resolution for
photo quality printing.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Pulse
A form of rotary dialling on a telephone
line.
Quick Dial List
A listing of names and numbers stored in
One Touch and Speed Dial memory, in
numerical order.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining jobs
You can check which jobs are waiting in
memory and cancel jobs individually.
Remote Access Code
Your own four-digit code (--- ) that allows
you to call and access your machine from
a remote location.
Remote Activation Code
Press this code (l 5 1) when you answer
a fax call on an extension or external
telephone.
Remote Deactivation Code
(For Fax/Tel mode only)
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension telephone by pressing this
code (# 5 1).
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Resolution
The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.
Ring Volume
Volume setting for the machine's ring.
Scan to Media
You can scan a monochrome or colour
document into a memory card or USB
Flash memory drive. Monochrome images
will be in TIFF or PDF file format and
colour images may be in PDF or JPEG file
format.
Glossary
213
E
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Search
An electronic, numerical or alphabetical
listing of stored One Touch, Speed Dial
and Group numbers.
Speed Dial
A pre-programmed number for easy
dialling. You must press
(Phone Book), the two digit code, and
Mono Start or Colour Start to start the
dialling process.
Standard resolution
203 97 dpi. It is used for regular size text
and quickest transmission.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender's name and fax number.
Super Fine resolution (Mono only)
392 203 dpi. Best for very small print
and line art.
TAD (telephone answering device)
You can connect an external TAD to your
machine.
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialling on the telephone line
used for Touch Tone telephones.
Transmission
The process of sending faxes over the
phone lines from your machine to the
receiving fax machine.
User Settings
A printed report that shows the current
settings of the machine.
Xmit Report (Transmission Verification
Report)
A listing for each fax sent, that shows its
date, time and number.
Index
214
F
A
Access codes, storing and dialling ...........80
ADF (automatic document feeder)
.... 22, 40
Answering machine (TAD)
.......................67
connecting
.............................................68
Apple Macintosh
See Software User's Guide on the
CD-ROM.
Automatic
fax receive
.............................................49
Fax Detect
..........................................52
B
Broadcasting ............................................43
setting up Groups for
............................79
C
Caller ID ...................................................65
Caller ID history
.......................................74
Caller ID History report
............................83
Cancelling
Fax Forwarding
.....................................62
jobs awaiting redial
...............................47
Cleaning
paper pick-up roller
.............................162
print head
............................................162
printer platen
.......................................161
scanner
...............................................161
Connecting
external TAD
(answering machine)
...................... 67, 68
external telephone
................................69
Consumable items
.................................208
Control panel overview
..............................6
ControlCenter
See Software User's Guide on the
CD-ROM.
Copy
book
...................................................... 94
brightness
............................................. 92
contrast
................................................. 93
enlarge/reduce
..................................... 89
enter Copy mode
.................................. 88
multiple
................................................. 88
out of memory
...................................... 97
page layout (N in 1)
.............................. 90
paper size
............................................. 93
paper type
............................................ 93
quality
................................................... 89
return to default
.................................... 96
set new default
..................................... 96
single
.................................................... 88
sort (ADF only)
..................................... 92
tray use
................................................. 28
using ADF
............................................. 92
using scanner glass
.............................. 23
watermark
............................................. 95
using a media card
............................ 95
using a paper document
.................... 96
using a template
................................ 95
using a USB Flash memory drive
...... 95
Cordless telephone
................................. 70
Custom telephone features on a single
line
......................................................... 140
D
Dialling
a pause
................................................. 74
access codes and credit card
numbers
............................................... 78
Caller ID history
.................................... 74
Groups
.................................................. 43
manual
.................................................. 72
One Touch
............................................ 72
Outgoing Call
........................................ 73
Speed Dial
............................................ 72
Direct printing
from a non-PictBridge camera
............ 120
from a PictBridge camera
................... 118
Document
loading
............................................ 22, 23
Dual Access
............................................ 46
215
F
E
Envelopes ................................... 15, 20, 21
Error messages on LCD
........................144
B&W Print Only
...................................144
Cannot Detect
.....................................145
Cannot Print
........................................145
Comm. Error
.......................................145
Ink low
.................................................146
No Cartridge
.......................................146
No Paper Fed
.....................................147
Not Registered
............................. 72, 147
Out of Memory
....................................147
while scanning a document
...............97
Unable to Clean
..................................148
Unable to Init.
......................................148
Unable to Print
....................................148
Unable to Scan
...................................149
Extension telephone, using
......................69
External telephone, connecting
................69
F
Fax codes
changing
........................................ 60, 71
Remote Access Code
...........................60
Remote Activation Code
..........52, 69, 70
Remote Deactivation Code
............ 69, 70
using
.....................................................70
Fax Detect
................................................52
Fax Forwarding
changing remotely
......................... 62, 63
programming a number
........................55
Fax Storage
.............................................55
printing from memory
............................54
turning on
..............................................55
Fax, from PC
See Software User's Guide on the
CD-ROM.
Fax, stand-alone
receiving
...............................................49
at end of conversation
.......................50
difficulties
................................ 136, 138
F/T Ring Time, setting
.......................51
Fax Detect
.........................................52
Fax Forwarding
..................................62
Fax Preview
................................ 58, 60
from extension telephone
........... 69, 70
from external telephone
.............. 69, 70
into PC
.............................................. 56
printing from memory
........................ 54
reducing to fit on paper
..................... 52
retrieving from a remote site
....... 62, 63
Ring Delay, setting
............................ 51
telephone line interference
.............. 143
tray use
............................................. 28
sending
........................................... 40, 84
Broadcasting
..................................... 43
cancelling from memory
.................... 47
contrast
............................................. 45
delayed batch transmission
............... 47
delayed fax
........................................ 46
enter Fax mode
................................. 40
from ADF
........................................... 40
from memory (Dual Access)
.............. 46
from scanner glass
............................ 41
manual
.............................................. 48
overseas
............................................ 46
Real Time Transmission
................... 46
Resolution
......................................... 45
return to factory setting
..................... 47
set new default
.................................. 47
telephone line interference
.............. 143
Fax/Tel mode
answering at extension
telephones
......................................69, 70
Remote Activation Code
................ 69, 70
Remote Deactivation Code
............69, 70
Ring Delay
............................................ 51
Function Lock
.......................................... 33
G
Greyscale ...................................... 199, 203
Groups for Broadcasting
......................... 79
H
Help
LCD messages
................................... 168
using Mode and menu keys
............ 168
Menu Table
................................ 168, 169
216
I
Ink cartridges
checking ink volume
............................165
ink dot counter
....................................157
replacing
.............................................157
Innobella™
.............................................208
J
Jacks
EXT
external telephone
.............................67
TAD (answering machine)
.................67
Jams
document
............................................151
paper
...................................................151
L
LCD (liquid crystal display) ....................168
Brightness
...................................... 31, 32
Contrast
................................................31
Dim Timer
.............................................32
Help List
................................................83
Loading envelopes and post cards
..........15
Loading paper
............................................9
M
Macintosh
See Software User's Guide on the
CD-ROM.
Maintenance, routine
replacing ink cartridges
.......................157
Manual
dialling
...................................................72
receive
..................................................49
transmission
..........................................48
Memory Security
......................................86
Memory Storage
....................................168
Menu Table
............................................168
Mode, entering
Copy
......................................................88
Fax
........................................................40
PhotoCapture
..........................................6
Scan
........................................................6
Multi-line connections (PBX)
....................68
N
Network
Printing
See Network User's Guide on the
CD-ROM.
Scanning
See Software User's Guide on the
CD-ROM.
O
One touch
setting up
.............................................. 74
Out of Area (Caller ID)
............................. 65
P
Packing the machine ............................. 165
Paper
.........................................15, 18, 198
capacity
................................................ 21
loading
........................................9, 12, 15
printable area
....................................... 17
size
....................................................... 27
size of document
.................................. 22
type
...........................................20, 26, 27
PaperPort™ 11SE with OCR
See Software User's Guide on the
CD-ROM and Help in the PaperPort™11SE
application to access How-to-Guides.
PhotoCapture Center
Adding Effect
...................................... 105
Borderless
.......................................... 113
CompactFlash
®
.................................. 100
Cropping
............................................. 113
DPOF printing
..................................... 109
Enhance Photos
Auto Correct
.................................... 105
Enhance Scenery
............................ 106
Enhance Skin-Tone
......................... 106
Monochrome
................................... 107
Remove Red-Eye
............................ 107
Sepia
............................................... 107
from PC
See Software User's Guide on the
CD-ROM.
Memory Stick PRO
......................... 100
Memory Stick™
.................................. 100
Preview photos
................................... 103
217
F
Print settings
Brightness
........................................112
Colour enhancement
.......................112
Contrast
...........................................112
Paper type & size
.............................111
Quality
..................................... 110, 111
Return to factory setting
...................114
Set new default
................................114
Printing
all photos
.........................................108
index
................................................104
photos
..............................................105
Scan to memory card
..........................114
Scan to USB flash memory
.................114
SD
.......................................................100
SDHC
..................................................100
Search by Date
...................................108
Slide-Show
..........................................108
specifications
......................................201
Trimming
.............................................109
xD-Picture Card™
...............................100
PictBridge
DPOF Printing
.....................................119
Power failure
..........................................168
Presto! PageManager
See Help in Presto! PageManager
application
Print
difficulties
................................... 136, 138
drivers
.................................................204
fax from memory
...................................54
paper jams
................................. 152, 154
printable area
........................................17
report
....................................................83
resolution
............................................204
specifications
......................................204
Printing
on small paper
......................................16
See Software User's Guide on the
CD-ROM.
Programming your machine
...................168
Q
Quick Dial ................................................ 74
Broadcasting
........................................ 43
using Groups
..................................... 43
Group dial
changing
................................75, 77, 78
setting up Groups for Broadcasting
... 79
One Touch Dial
custom scan profile
........................... 74
setting up
........................................... 74
Search
.................................................. 73
Speed Dial
changing
................................75, 77, 78
setting up by 2-digit location
.............. 76
setting up from Caller ID
history
.......................................... 75, 77
setting up from outgoing calls
.....75, 77
using
.................................................. 72
R
Receive Mode
External TAD
........................................ 49
Fax Only
............................................... 49
Fax/Tel
................................................. 49
Manual
................................................. 49
Redial/Pause
........................................... 73
Reducing
copies
................................................... 89
incoming faxes
..................................... 52
Remote Retrieval
..................................... 60
access code
................................... 60, 61
commands
............................................ 62
getting your faxes
................................. 63
Remote Setup
See Software User's Guide on the
CD-ROM.
Reports
.................................................... 82
Caller ID History Report
....................... 83
Fax Journal
.......................................... 83
Journal Period
................................... 83
Help List
............................................... 83
how to print
........................................... 83
Network Configuration
.......................... 83
Quick Dial List
...................................... 83
Transmission Verification
............... 82, 83
User Settings
........................................ 83
218
Resolution
copy
....................................................200
fax
.......................................................199
print
.....................................................204
scan
....................................................203
setting for next fax
.................................45
Restricted users
.......................................35
Ring Delay, setting
...................................51
S
Safety Instructions ........................ 127, 131
Scannable area
........................................24
Scanning
See Software User's Guide on the
CD-ROM.
Security
Secure function lock
administrator password
......................33
Public user
.........................................34
restricted users
..................................35
Serial Number
how to find............... See inside front cover
Shipping the machine
............................165
Sleep Mode
..............................................31
Speed Dial
changing
..................................75, 77, 78
dialling
...................................................72
storing
...................................................76
T
TAD (telephone answering device),
external
............................................. 49, 67
connecting
...................................... 67, 68
receive mode
........................................49
recording OGM
.....................................68
Tel/R key, using
.........................................6
Telephone line
connections
...........................................68
difficulties
............................................139
interference
.........................................143
multi-line (PBX)
.....................................68
type
.......................................................66
Text, entering
.........................................194
special characters
...............................194
Transferring your faxes or
Fax Journal report
..................................150
Transparencies
.................. 18, 19, 21, 198
Tray Select key
........................................93
Troubleshooting
..................................... 136
checking ink volume
........................... 165
document jam
..................................... 151
error messages on LCD
..................... 144
if you are having difficulty
copying
............................................ 140
document jam
.................................. 151
incoming calls
.................................. 140
Network
........................................... 142
PhotoCapture Center
................... 141
printing
............................................ 136
printing received faxes
.................... 138
receiving faxes
................................ 139
scanning
.......................................... 140
software
........................................... 141
telephone line or connections
......... 139
paper jam
................................... 152, 154
V
Volume, setting
beeper
.................................................. 30
ring
....................................................... 29
speaker
................................................. 30
W
Windows
®
See Software User’s Guide on the
CD-ROM.
Wireless Network
See Quick Setup Guide and Network
User's Guide on the CD-ROM.
Visit us on the World Wide Web
http://www.brother.com
This machine is approved for use in the country of purchase only. Local Brother companies or their
dealers will only support machines purchased in their own countries.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-5895CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-5895CW in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-5895CW

Brother MFC-5895CW Installation Guide - English - 42 pages

Brother MFC-5895CW Installation Guide - German - 42 pages

Brother MFC-5895CW User Manual - German - 234 pages

Brother MFC-5895CW User Manual - Dutch - 42 pages

Brother MFC-5895CW Installation Guide - Dutch - 30 pages

Brother MFC-5895CW User Manual - Dutch - 240 pages

Brother MFC-5895CW User Manual - French - 42 pages

Brother MFC-5895CW User Manual - French - 241 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info