718891
28
Zoom out
Zoom in
Previous page
1/76
Next page
26
CHAPTER 6
TROUBLESHOOTING
This sewing machine is designed for trouble-free operation. However, the following chart indicates trouble
which may occur if basic adjustments are not made properly.
Trouble Cause Remedy
1. Does not feed Presser foot pressure too loose Turn the pressure adjustment
screw clockwise to increase the
presser foot pressure.
(See page 9.)
2. Needles break 1. Needles bent, or needle tip blunt Replace with new needle.
(See page 13.)
2. Needles incorrectly installed Install needles correctly.
(See page 13.)
3. Material pulled forcibly Do not press or pull material too
hard when sewing.
3. Threads break 1. Improper threading Thread correctly.
(See pages 15-18.)
2. Thread tangled Check spool pin, thread holders,
etc. and remove tangled thread.
3. Thread tension too tight Adjust the thread tension.
(See pages 10-12.)
4. Needles incorrectly installed Install needles correctly.
(See page 13.)
5. Wrong needle used Use correct needle.
130/705H - suggested
(See page 13.)
4. Skipped stitches 1. Needle bent, or needle tip blunt Replace with new needle.
(See page 13.)
2. Needle incorrectly installed Install needle correctly.
(See page 13.)
3. Wrong needle used Use correct needle.
130/705H - suggested
(See page 13.)
4. Improper threading Thread correctly.
(See pages 15-18.)
5. Presser foot pressure too loose Turn the pressure adjustment
screw clockwise to increase the
presser foot pressure.
(See page 9.)
5. Stitches are not uniform Thread tensions are not adjusted
properly
Adjust the thread tension.
(See pages 10-12.)
6. Fabric is puckered 1. Thread tension too tight Decrease thread tension when
sewing lightweight or fine material.
(See pages 10-12.)
2. Improper threading or thread
tangled
Thread correctly.
(See pages 15-18.)
28


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-m343d

Reset search

  • Como regular para hacer dobladillo en tela de gasa o organza Submitted on 9-6-2023 at 18:35

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother M343D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother M343D in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother M343D

Brother M343D User Manual - German - 76 pages

Brother M343D User Manual - Dutch, French - 76 pages

Brother M343D User Manual - Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info