631292
29
Zoom out
Zoom in
Previous page
1/48
Next page
28
3
3 BUILT-IN STITCHES
Straight stitching
Straight stitches are used for sewing plain seams.
* Turn the stitch width dial to adjust the needle position.
Setting the dial to “5” selects the left needle position;
setting the dial to “0” selects the right needle position.
Refer to “Stitch width dial” on page 12.
Top stitching and stretch materials
You can use a straight stitch for top stitching and
sewing lightweight fabrics.
You can use a triple stretch stitch for sewing stretch
fabrics.
Zigzag stitching
Zigzag stitch
Turn the pattern selection dial to the Zigzag Stitch,
and then start sewing.
We recommend that you sew using the Straight
Stitch at the beginning and end of zigzag stitches.
(This acts as a reinforcement stitch.)
Satin stitch
Setting the Zigzag Stitch length in the “F”-“1” range
produces a satin stitch (close zigzag stitch). The
Satin Stitch can be used for making buttonholes and
decorative stitches. Set the pattern selection dial to
the Zigzag Stitch, set the stitch length in the “F”-“1”
range, and set the stitch width dial between “0” and
“5”.
Blind hem stitching
You can use the Blind Hem Stitch to finish the edge of a
project, like the hem of a pair of trousers, without the
stitch showing. Blind Hem Stitch: sewing on non-stretch
fabrics. Stretch Blind Hem Stitch: for stretch fabrics.
Memo
When the size of cylindrical pieces is too
small to slide onto the arm or the length is
too short, the fabric will not feed and
desired results may not be achieved.
1
Reverse the skirt or pants.
1 Wrong side of fabric
2 Right side of fabric
3 Bottom side
4 Edge of fabric
Stitch Name
Pattern Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
37 27
Straight Stitch
1-4
(1/16-3/16)
0-5*
(0-3/16)
Triple Stretch
Stitch
Fixed
2.5 (3/32)
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Zigzag Stitch
F-4
(1/64-3/16)
0-5
(0-3/16)
2
20
15
3
Stitch Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Blind Hem
Stitch
F-2
(1/64-1/16)
3-5
(1/8-3/16)
Stretch Blind
Hem Stitch
F-1.5
(1/64-1/16)
3-5
(1/8-3/16)
4
7
2
1
3
4
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LX37NT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LX37NT in the language / languages: English as an attachment in your email.

The manual is 18,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info