Manual Brother LX27NT (page 36 of 48) (English)

631291

Zoom out

Zoom in

1/48

SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

———————————————————————————————————————

—————

■ If the button does not fit in the button guide

plate

Add together the diameter and thickness of the

button, and then set the button guide plate to the

calculated length. (The distance between the

markings on the presser foot scale is 5 mm (3/16

inch).)

1 Presser foot scale

2 Length of buttonhole

(Diameter + thickness of button)

3 5 mm (3/16 inch)

Example: For a button with a diameter of 15 mm (9/16

inch) and a thickness of 10 mm (3/8 inch), the button

guide plate should be set to 25 mm (1 inch) on the

scale.

1 10 mm (3/8 inch)

2 15 mm (9/16 inch)

Pass the upper thread down through the

hole in the presser foot.

You need to sew the front bar tack first.

Lower the presser foot to align the marks

on the foot with the mark on the fabric.

1 Starting mark on the fabric

2 Marks on the foot

Lower the buttonhole lever and push it

back slightly.

1 Buttonhole lever

While gently holding the upper thread,

start the machine.

The bar tacks of the buttonhole are sewn

in the order shown.

Stop the machine when buttonhole

stitching is finished.

Note

● If buttonhole sewing was interrupted, sew

trial stitching one or two times on a scrap

piece of fabric before continuing to sew the

project. Stitching that is continued after

being interrupted may be sewn incorrectly.

● If thick seams are being sewn and the fabric

does not feed, sew with the coarser (longer)

stitch.

Raise the needle and the presser foot

lever, remove the fabric, and cut the

thread.

Raise the buttonhole lever to its original

position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother LX27NT in the language / languages: English as an attachment in your email.

The manual is 18,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother LX27NT Manual

Product: