555743

Brother LS1317 Manual

64
Zoom out
Zoom in
Previous page
1/81
Next page
54
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
Oiling
1. Remove the power supply plug from the outlet.
2. Put 2 to 3 drops of oil at each of the points indicated in fig. A.
3. After oiling, run the machine at a fast speed without thread in-
stalled for a short time.
4. Be sure to wipe any excess oil off the machine.
NOTE:
The machine should be oiled once a week if it is used more than one
hour a day. If the machine is used more often, oil every day.
Sewing machine oil is available from your local sewing machine dealer
or service center.
Do not apply too much oil as it may get on your thread and fabric.
Huilage
1. Retirer la fiche de la prise de courant.
2. Mettre 2-3 gouttes d’huile sur chaque point indiqué à la fig. A.
3. Après l’huilage, faire marcher la machine rapidement sans fil pen-
dant un court moment.
4. Veiller à essuyer tout excédent d’huile de la machine.
REMARQUE:
La machine doit être huilée une fois par semaine si utilisée plus d’une
heure par jour. Si elle est utilisée plus souvent, l’huiler tous les jours.
On peut acheter de l’huile chez les revendeurs ou centres de service
locaux.
Ne pas utiliser trop d’huile pour éviter qu’elle ne tâche le tissu ou le fil.
Engrasado
1. Desenchufe la máquina.
2. Ponga 2 ó 3 gotas de aceite en cada uno de los puntos señala-
dos en la fig. A.
3. Después de lubricar la máquina, hágala funcionar rápidamente
unos instantes sin hilo.
4. Asegúrese de limpiar cualquier exceso de aceite de la máquina.
NOTA:
La máquina debe lubricarse una vez por semana si se usa más de
una hora diaria. Si se usa con más frecuencia, debe engrasarse cada
día.
Puede comprar aceite para máquina de coser a su distribuidor o
centro técnico local.
No conviene aplicar demasiado aceite ya que podría correr por el
hilo y el tejido.
Lubrificação
1. Remova o plugue de força CA da tomada elétrica.
2. Pingue 2 ou 3 gotas de óleo em cada ponto indicado na fig. A.
3. Após a lubrificação, acione a máquina a uma velocidade alta sem carre-
tel instalado por um breve período.
4. Certifique-se de limpar qualquer excesso de óleo da máquina.
NOTA:
A máquina deve ser lubrificada uma vez por semana, se usada por mais de
uma hora por dia. Se a máquina for utilizada ainda com maior frequência,
lubrifique-a todos os dias.
O óleo para máquina de costura está disponível no seu representante ou
centro de assistência local para máquinas de costura.
Não aplique demasiado óleo, pois, se o fizer, o óleo poderá atingir a sua
linha ou tecido.
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1317 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1317 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info