555741

Brother LS1217 Manual

22
Zoom out
Zoom in
Previous page
1/81
Next page
12
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
Needle Position Selector
By shifting this lever to L (left), M (middle) or R (right), you can sew
straight and zigzag stitches on the baseline.
When you sew close to the edge of the fabric, select L or R so the fabric
is fed more easily.
This selector should be set at M (middle) for almost all stitches, but set
it to other positions for the following applications.
1. Buttonhole Sewing (See page 36.)
2. Button Sewing (See page 40.)
3. Decorative Stitches (See page 33.)
NOTE:
1. Do not move the selector while the needle is in the fabric.
2. Always set the selector to M when using the twin needle.
L
M
R
L
M
R
L
M
R
Sélecteur de position de l’aiguille
En plaçant ce levier sur L (gauche), M (milieu) ou R (droite), il est pos-
sible de piquer des points droits et en zigzag sur les ourlets.
Lorsque l’on coud près du bord du tissu, sélectionner L ou R pour que
le tissu soit plus facilement entraîné.
Ce sélecteur doit être sur M (milieu) pour presque tous les points, mais
sur d’autres positions pour les coutures suivantes :
1. Boutonnières (Voir page 36.)
2. Boutons (Voir page 40.)
3. Points fantaisie (Voir page 33.)
REMARQUE :
1. Ne pas tourner le sélecteur lorsque l’aiguille se trouve dans le tissu.
2. Toujours mettre le sélecteur sur M lors de l’utilisation de l’aiguille
jumelée.
Selector de posición de la aguja
Si coloca esta palanca en “L” (izquierda), “M” (medio), o “R” (dere-
cha), podrá coser puntadas rectas y zigzag como línea principal.
Al coser cerca de la orilla del tejido, conviene seleccionar L ó R para
que el tejido se alimente más fácilmente.
Conviene colocar el selector en “M” (medio) para la mayoría de las
puntadas, pero es necesario cambiarlo de posición para las siguien-
tes aplicaciones:
1. Costura de ojales (véase página 37.)
2. Costura de botones (véase página 41.)
3. Puntadas decorativas (véase página 33.)
NOTA:
1. No se puede mover el selector cuando la aguja está picada en el
tejido.
2. Ponga siempre el selector en “M” si usa la aguja doble.
Seletor de Posição da Agulha
Mediante o deslocamento desta alavanca a L (esquerda), M (meio) or R
(direita), você pode costurar pontos retos e zig-zag como linha-base.
Quando for costurar perto da borda do tecido, selecione L ou R de forma
que o tecido avance com maior facilidade.
Este seletor deve ser ajustado a M (meio) para quase todos os pontos, mas
para as aplicações a seguir, regule-o a outras posições.
1. Costura de Casas para Botões (Veja página 37.)
2. Fixação de Botões (Veja página 41.)
3. Pontos Decorativos (Veja página 33.)
NOTA:
1. Não mova o seletor enquanto a agulha estiver no tecido.
2. Ajuste sempre o seletor a M quando for usar a agulha dupla.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info