555741
19
Zoom out
Zoom in
Previous page
1/81
Next page
9
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
VARIOUS CONTROLS
Stitch Length Dial
The stitch length is regulated by turning this knob.
The numbers above the knob represent the stitch length in millimeters
(mm).
The larger numbers set a longer stitch length.
When the knob is set to 0, the fabric is not fed. This setting is used for
sewing on a button.
The F area is used for making a Satin Stitch (a close zigzag stitch),
which can be used in making buttonholes and decorative stitches. The
position needed for making the Satin Stitch may need to be adjusted
according to the fabric and thread being used. To determine the cor-
rect knob position, first test the length settings on a fabric scrap.
1 Stitch length dial
2 Shorter
3 Longer
1
0
F
1
2
4
3
DIVERSES COMMANDES
Sélecteur de longueur de point
La longueur du point est réglée en tournant ce bouton.
Les chiffres au-dessus du bouton représentent la longueur du point en
millimètres (mm).
Plus le chiffre est élevé, plus le point est long.
Lorsque le sélecteur est sur 0, le tissu ne sera pas entraîné. Ce réglage
est utilisé pour coudre des boutons.
La plage F est utilisée pour les points bourdon (un point zigzag serré),
les boutonnières ou les points fantaisie . Il est parfois nécessaire de
régler la position pour un point bourdon en fonction du tissu et du fil
utilisés. Pour déterminer la position exacte du sélecteur, il est préféra-
ble dessayer en premier les réglages de longueur sur une chute de
tissu.
1
Sélecteur de longueur de point
2
Plus court
3
Plus long
VARIOUS CONTROLS
Selector de largo de puntada
Este botón permite ajustar el largo de puntada.
Los números marcados arriba representan el largo de la puntada en
milímetros (mm).
Los números más altos dan una puntada más larga.
El ajuste 0 no alimenta el tejido. Sirve para coser botones.
La zona F se usa para realizar puntadas de realce (puntadas zigzag
muy cerradas) que pueden servir para ojales o decoración. La posi-
ción exacta necesaria para realizar puntadas de realce varía depen-
diendo del tejido e hilo utilizados. Para determinar la posición más
adecuada del botón, conviene primero probar los ajustes de largo
en un pedazo de tela.
1 Selector de largo de puntada
2 Más corto
3 Más largo
OS VÁRIOS CONTROLES
Seletor de Comprimento do Ponto
O comprimento do ponto pode ser regulado girando-se este botão.
Os números acima do botão representam o comprimento do ponto em milí-
metros (mm).
Números maiores definem um comprimento de ponto também maior.
Quando o botão for ajustado a 0, o tecido não avançará. Este ajuste é utiliza-
do para costurar botões.
A área F é utilizada para confeccionar um Ponto Cheio (um ponto em zig-
zag fechado), o qual pode ser usado para fazer casas para botões e pontos
decorativos. A posição requerida para fazer o Ponto Cheio pode precisar ser
regulada de acordo com o tecido e a linha em uso. Para determinar a posi-
ção correta do botão, primeiro teste os ajustes de comprimento num pedaço
de tecido.
1 Seletor de comprimento do ponto
2 Mais curto
3 Mais longo
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info