Manual Brother LS1217 (page 14 of 81) (English, French, Portuguese, Spanish)

555741

Zoom out

Zoom in

1/81

CONTENTS INDEXMAINTENANCE

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

OPERATING YOUR SEWING

MACHINE

Connecting Plugs

1. Insert the foot controller plug, located between the foot controller

and the power supply plug on the cord, into the jack on the ma-

chine.

2. Insert the power supply plug into an electrical outlet.

CAUTION:

1. When changing the light bulb or when the sewing machine is not

in use, the power supply plug must be disconnected from the wall

socket to avoid electrical hazards.

2. For U.S.A. only

This appliance has a polarized plug (one blade wider than the

other). To reduce the risk of electric shock, this plug is intended to

fit in a polarized outlet only one way. If the plug does not fit com-

pletely in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the

proper outlet. Do not modify the plug in any way.

FONCTIONNEMENT DE LA MA-

CHINE A COUDRE

Branchement des prises

1. Brancher la fiche de la pédale, située entre la pédale et la fiche

d’alimentation du cordon, dans la prise de la machine.

2. Brancher la fiche d’alimentation à une prise secteur.

PRECAUTION :

1. Lors du remplacement de l’ampoule ou lorsque la machine n’est

pas utilisée, la fiche d’alimentation doit être débranchée de la

prise secteur pour éviter toute décharge électrique.

2. Uniquement pour les Etats-Unis

Cette machine comprend une fiche polarisée (une broche plus

large que l’autre). Pour réduire le risque d’électrocution, cette

fiche est conçue afin d’être enfoncée dans une prise polarisée d’une

seule manière. Si la fiche ne s’enfonce pas totalement dans la prise,

la retourner.

Si elle ne s’enfonce toujours pas correctement, contacter un élec-

tricien qualifié pour l’installation de la prise nécessaire. Ne pas

modifier la fiche de quelque façon que ce soit.

FUNCIONAMIENTO DE LA MÁ-

QUINA DE COSER

Conexión de los enchufes

1. Conecte el enchufe del pedal, situado entre el pedal y el enchufe

de alimentación en el cordón, a la máquina.

2. Conecte el enchufe de alimentación a una toma de corriente

ATENCIÓN:

1. Cuando se cambie la bombilla de luz o la máquina esté apa-

gada, se recomienda siempre retirar el enchufe de la toma

de corriente para evitar riesgos eléctricos.

2. Sólo para EE.UU.

Este aparato tiene un enchufe polarizado (una hoja más an-

cha que la otra). Para reducir el riesgo de descarga eléctrica,

este enchufe sólo encaja en una toma de corriente polariza-

da de una manera. Si el enchufe no encaja completamente,

dé la vuelta al enchufe.

Si aún así no encaja, póngase en contacto con un profesio-

nal cualificado para instalar la toma de corriente adecuada.

No modifique el enchufe bajo ningún concepto.

OPERANDO A SUA MÁQUINA DE

COSTURA

Conexão dos plugues

1. Insira na tomada da máquina, o plugue do reostato, localizado entre o

reostato e o plugue de força CA.

2. Insira o plugue de força CA numa tomada da rede elétrica.

AVISO:

1. Quando for trocar a lâmpada ou quando a máquina de costura não

estiver em uso, o plugue de força CA deverá ser desconectado da

tomada de parede para evitar riscos de descargas elétricas.

2. Somente para os E.U.A.

Este aparato possui um plugue polarizado (uma lâmina mais larga

que a outra). Para reduzir o risco de choques elétricos, este plugue

foi concebido para encaixar numa tomada polarizada de uma única

maneira. Se o plugue não se encaixar completamente na tomada,

inverta-o.

Se ainda assim o plugue não se encaixar na tomada, contate um

eletricista qualificado para instalar a tomada apropriada. Não mo-

difique o plugue de nenhuma maneira.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother LS1217 Manual

Product: