631286
43
Zoom out
Zoom in
Previous page
1/68
Next page
34
Buttonhole Fine Adjustment
If the stitching on the two sides of the buttonhole do not appear
uniform, the following adjustments can be made.
1. After sewing the left side of the buttonhole, stitch the right side
and observe the feeding.
2. If the right side is too coarse or fine compared to the left side,
adjust the buttonhole fine-adjusting screw as described
below.
If the right side is too coarse, turn the buttonhole fine-adjusting
screw with a large screw driver in the – direction.
If the right side is too fine, turn the buttonhole fine-adjusting
screw with a large screw driver in the + direction.
This adjustment allows both sides of the buttonhole to appear
uniform.
a Buttonhole fine-adjusting screw
b Right row
c Too coarse
d Too fine
Equilibrage des boutonnières
Si les points de chaque côté de la boutonnière sont
dissemblables, procéder aux réglages suivants:
1. Lorsque l’on obtient un entraînement satisfaisant pour la lèvre
gauche, coudre la lèvre droite de la boutonnière et observer
l’entraînement.
2. Si la lèvre droite est trop dense ou trop espacée par rapport à
la lèvre gauche, régler la vis d’équilibrage des boutonnières,
comme indiqué ci-dessous.
Si le côté droit est trop gros, tournez la vis d'équilibrage des
boutonnières à l'aide d'un grand tournevis dans le sens -.
Si le côté droit est trop fin, tournez la vis d'équilibrage des
boutonnières à l'aide d'un grand tournevis dans le sens +.
Ce réglage rend les deux lèvres de la boutonnière uniformes.
a Vis d’équilibrage des boutonnières
b Lèvre droite
c Trop dense
d Trop fin
Ajuste fino de los ojales
Si las puntadas en ambos lados del ojal no parecen ser uniformes, se
pueden hacer los siguientes ajustes.
1. Después de coser la parte izquierda del ojal, cosa la parte derecha
y mire la alimentación del tejido.
2. Si la parte derecha del ojal es demasiada gruesa o fina con
relación a la parte izquierda, apriete o suelte el tornillo para
ajuste fino del ojal tal como se describe a continuación.
Si la parte derecha es demasiado gruesa, con un destornillador
grande gire el tornillo de ajuste fino de ojales en el sentido de -.
Si la parte derecha es demasiado fina, con el destornillador grande
gire dicho tornillo en el sentido de +.
Este ajuste permite que ambos lados del ojal parezcan uniformes.
a Tornillo de ajuste fino de ojal
b Lado derecho
c Demasiado grueso
d Demasiado fino
Точная настройка при выметывании
петель
Если строчка на двух сторонах петли выглядит неодинаково,
может быть произведена следующая регулировка:
1. После вымётывания левой части петли начинайте
выметывание правой части и наблюдайте за подачей
ткани.
2. Если правая сторона слишком рыхлая или слишком
плотная по сравнению с левой, выполните регулировку с
помощью винта точной настройки, как описано ниже.
Если правая сторона слишком рыхлая, большой отверткой
поверните винт точной настройки выметывания петель в
направлении “–”.
Если правая сторона слишком плотная, большой отверткой
поверните винт точной настройки выметывания петель в
направлении “+”.
Эта регулировка позволяет добиться того, чтобы обе стороны
петли выглядели одинаково.
a Винт точной настройки выметывания петель
b Правый ряд
c Слишком рыхло
d Слишком плотно
1
2
+
3
4
+
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-3125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-3125 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info