458318

Brother LS-2129 Manual

36
Zoom out
Zoom in
Previous page
1/67
Next page
28
Elastic Stitching
The Elastic Stitch can be used in 3 ways: mending, sewing elastic
or joining fabric. Each is explained below.
Set the pattern selection dial to 14.
MENDING
1. Place the reinforcement fabric under the tear to be mended.
2. Following the line of the tear, sew using the Elastic Stitch as
illustrated in fig. A.
SEWING ELASTIC
1. Place the elastic on the fabric.
2. As you sew, stretch the elastic both in the front and behind the
presser foot as shown in fig. B.
JOINING FABRIC
The Elastic Stitch can be used to join two pieces of fabric together
and is very effective when sewing knitted fabrics. When nylon
thread is used, the stitch will not be visible.
1. Place the edge of the two pieces of fabric together and center
them under the presser foot.
2. Sew them together using the Elastic Stitch taking care to keep
the two fabric edges close together as shown in fig. C.
Pattern
14 (Elastic Stitch)
Point élastique
Le point élastique possède trois fonctions principales: le
raccommodage, la couture d’élastiques ou l’assemblage de tissus.
Chacune de ces trois fonctions se trouve détaillée ci-dessous.
Mettre le sélecteur de modèle sur 14.
REPRISAGE
1. Placer une pièce de renfort sous la déchirure à réparer.
2. Coudre en suivant la ligne de la déchirure. Coudre au point
élastique comme le montre la fig. A.
COUTURE D’ELASTIQUES
1. Placer l’élastique sur le tissu.
2. A mesure que l’on coud, tendre l’élastique de part et d’autre
du pied-de-biche (voir fig. B).
ASSEMBLAGE DE TISSUS
Le point élastique peut servir à assembler deux morceaux de
tissu. Il s’avère particulièrement efficace pour la couture de
tricots. Avec du fil nylon, la couture sera invisible.
1. Placer bord à bord les deux pièces de tissu et les centrer sous
le pied-de-biche.
2. Les assembler avec le point élastique, en prenant bien soin de
garder les deux pièces bord à bord, comme le montre la fig.C.
Modèle
14 (Point élastique)
Puntada elástica
Se puede usar la puntada elástica para tres operaciones: los remiendos, la
inserción de gomas elásticas y como puntada de unión para juntar dos tejidos.
Cada una de estas operaciones se detalla a continuación.
Ponga el selector de puntadas en 14.
REMIENDOS
1. Coloque una tela de refuerzo debajo de la parte a remendar.
2. Siguiendo la línea de la rasgadura, cosa con la puntada elástica
tal como ilustrado en la fig. A.
INSERCIÓN DE GOMAS ELÁSTICAS
1. Ponga la goma sobre el tejido.
2. A medida que esté cosiendo, estire el elástico tanto delante como
detrás del prensatelas tal como se muestra en la fig. B.
PUNTADA DE UNIÓN
La puntada elástica puede servir para unir dos trozos de tejido y
resulta muy eficiente para la costura de prendas de punto. Si se usa un
hilo de nylón, la puntada resultará invisible.
1. Junte las orillas de ambos trozos de tejido y céntrelas debajo del
prensatelas.
2. Cósalas juntas con la puntada elástica, teniendo sumo cuidado en mantener
las dos orillas de los tejidos muy juntas, tal como se aprecia en la
fig. C
.
Número de puntada
14 (puntada elástica)
Costura elástica
O Ponto elástico pode ser utilizado para 3 finalidades: remendar,
pregar elásticos ou unir tecidos. Cada uma delas é a seguir explicada.
Coloque o seletor de pontos em 14.
COMO FAZER REMENDOS
1. Coloque algum tipo de eforço (tela, papel, etc.) sob a área do
tecido a ser remendado.
2. Seguindo a linha do rasgo, costure com o ponto elástico (fig. A).
COMO COSTURAR ELÁSTICOS
1. Coloque o elástico sobre o tecido.
2. A medida que for costurando, estique o elástico tanto à frente
quanto atrás do pé calcador (fig. B).
COMO UNIR DOIS TECIDOS
O ponto elástico usa-se para unir dois tecidos e é recomendado para
costurar malhas. Para que a costura não seja percebida (ponto
invisível) use fio de nylon.
1. Faça uma dobra de 1,5 cm nos dois tecidos e junte as duas beiradas
sob o pé calcador, no centro.
2. Costure guiando o trabalho de tal maneira que os pontos elásticos
preguem, em sua largura, os dois tecidos por igual (fig. C).
Nº do ponto
14 (Ponto elástico)
AB C
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-2129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-2129 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info