631281
52
Zoom out
Zoom in
Previous page
1/82
Next page
42
USING ATTACHMENTS AND APPLICATIONS
UTILISATION DES ACCESSOIRES ET LEURS APPLICATIONS
USO DE ACCESORIOS Y APLICACIONES
UTILIZAÇÃO DE ACESSÓRIOS E APLICAÇÕES
Zipper Insertion
STITCH LENGTH 2-3
STITCH WIDTH 0
NEEDLE POSITION M
PRESSER FOOT Zipper Foot
NEEDLE Single
The zipper foot is used to sew on various types of zippers and can
easily be positioned to the right or left side of the needle.
When sewing the right side of the zipper, attach the shank to the left
pin of the zipper foot. When sewing the left side of the zipper, attach
the shank to the right pin of the zipper foot. See fig. A.
1. Lower the presser foot lever and attach either the left or right pin of
the zipper foot onto the shank.
2. Fold the edge of the fabric 2 cm (3/4") back and place the zipper
under the folded portion.
3. Lower the needle into the notch located on the side of the zipper
foot.
4. Sew from the bottom of the zipper toward the top on both sides.
The needle should be positioned on the zipper side of the foot for
best results. See fig. B. Sew through the fabric close to the edge of
the zipper guiding the zipper foot along the zipper teeth.
5. To sew the opposite side of the zipper, release the foot by raising
the lever located at the back of the presser foot holder assembly,
install the zipper foot on the other side of the zipper and continue
sewing using the other side notch.
1 Zipper foot
2 Right pin for sewing the left side of the zipper
3 Left pin for sewing the right side of the zipper
4 Lower the needle into the notch
Insertion de fermeture à glissière
Longueur de point 2-3
Largeur de point 0
Position de laiguille M
Pied-de-biche Pied-de-biche pour fermetures
Aiguille Simple
Le pied à semelle étroite permet de coudre de nombreux types de
fermetures à glissière et peut aisément être installé à droite ou à gau-
che de laiguille.
Lors de la couture de la partie droite de la fermeture à glissière, fixer la
semelle à la partie gauche du pied approprié. Lors de la couture du
côté droit, installer la semelle à la partie droite du pied. Voir fig. A.
1. Abaisser le levier du pied-de-biche et fixer la partie gauche ou droite
du pied pour fermetures à glissière dans lencoche.
2. Plier le bord du tissu à 2 cm et placer la fermeture à glissière sous la
partie pliée.
3. Abaisser laiguille et la faire passer dans lencoche située sur le
côté du pied pour fermetures à glissière.
4. Coudre la fermeture à glissière de bas en haut, des deux côtés.
Pour obtenir les meilleurs résultats, il est recommandé de placer
laiguille du côté de la fermeture à glissière par rapport au pied.
Voir fig. B. Coudre le tissu près du bord de la fermeture en guidant
le pied-de-biche pour fermetures le long des dents de la fermeture.
5. Pour coudre le côté opposé de la fermeture à glissière, libérer le
pied en relevant le levier situé à larrière du support, installer le
pied pour fermeture à glissière de lautre côté de la fermeture et
continuer à coudre en faisant passer laiguille par lautre encoche.
1
Pied pour fermetures à glissière
2
Axe de droite pour coudre le côté gauche de la fermeture
à glissière
3
Axe de gauche pour coudre le côté droit de la fermeture à
glissière
4
Abaisser laiguille et la faire glisser dans lencoche.
4
A
1
2
B
4
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-1717 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-1717 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother LS-1717

Brother LS-1717 User Manual - German, Dutch, French, Italian - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info