718836
62
Zoom out
Zoom in
Previous page
1/72
Next page
60
APPENDIX
a Lower side of fabric
b Lower thread visible from upper side of fabric
c Upper thread
d Upper side of fabric
e Lower thread
f Upper thread visible from lower side of fabric
Cause/remedy/check details
Cause 1
The machine is not correctly threaded.
<With symptoms 1 and 2 described above>
The lower threading is incorrect.
Return the upper tension-control dial to “4”,
and then refer to “Upper thread tightened up”
(page 59) to correct the threading.
<With symptoms 3 through 5 described above>
The upper threading is incorrect.
Return the upper tension-control dial to “4”,
and then refer to “Tangled thread on wrong side
of fabric” (page 59) to correct the upper
threading.
Cause 2
A needle and thread appropriate for the fabric
are not being used.
Refer to “Needle types and their uses”
(page 19) to check that a needle and thread
appropriate for the fabric are being used.
Cause 3
An appropriate setting on the upper tension-
control dial is not selected.
Turn the upper tension-control dial to select an
appropriate thread tension.
* Adjust the thread tension while test sewing
on a piece of scrap fabric that is the same as
that used in your project.
Note
If the upper threading and lower threading are
incorrect, the thread tension cannot be adjusted
correctly, even by turning the upper tension-control
dial. Check the upper threading and lower
threading first, and then adjust the thread tension.
When the lower thread is visible from the
upper side of the fabric, turn the dial
counterclockwise.
When the upper thread is visible from the
lower side of the fabric, turn the dial
clockwise.
If the fabric is caught in the sewing machine and
cannot be removed, the thread may have become
tangled under the needle plate. Follow the procedure
described below to remove the fabric from the
machine. If the operation could not be completed
according to the procedure, instead of attempting to
complete it forcefully, contact your nearest authorized
service center.
Removing the fabric from the machine
a
Immediately stop the sewing machine.
b
Turn off the sewing machine.
c
Remove the needle.
If the needle is lowered into the fabric, turn the
handwheel away from you (clockwise) to raise
the needle out of the fabric, and then remove the
needle.
Refer to “Replacing the needle” (page 20).
d
Remove the presser foot and presser foot holder.
Refer toReplacing the presser foot” (page 22)
and “Removing the presser foot holder”
(page 23).
e
Lift up the fabric and cut the threads below it.
If the fabric can be removed, remove it.
f
Remove the needle plate cover.
a Needle plate cover release
b Needle plate cover (front part)
g
Cut out the tangled threads, and then remove
the bobbin.
4
3
5
4
3
5
Fabric is caught in the machine
and cannot be removed
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info