718836
44
Zoom out
Zoom in
Previous page
1/72
Next page
42
UTILITY STITCHES
a
Determine the desired length of the bar tack.
Set the button guide plate on buttonhole foot “A”
to the desired length. (The distance between the
markings on the presser foot scale is 5 mm (3/16
inch).)
A bar tack with a maximum length of about 28
mm (1-1/8 inches) can be sewn.
b
Attach buttonhole foot “A”.
c
Select stitch .
d
Position the fabric so that the opening of the
pocket faces toward you, and then lower the
presser foot lever so that the needle drops 2 mm
(1/16 inch) in front of the pocket opening.
Pass the upper thread down through the hole in
the presser foot.
When lowering the presser foot, do not push in
the front of the presser foot, otherwise the bar
tack will not be sewn with the correct size.
a Do not reduce the gap.
e
Pull down the buttonhole lever as far as
possible.
a Buttonhole lever
b Bracket
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
f
Gently hold the end of the upper thread in your
left hand, and then start sewing.
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops.
g
Raise the needle and the presser foot lever,
remove the fabric, and cut the thread.
h
Raise the buttonhole lever to its original
position.
Memo
If the fabric does not feed, for example, because it is
too thick, increase the stitch length. For details, refer
to “Selecting a stitch” (page 24).
Various decorative stitches can be sewn with this
sewing machine.
a Presser foot scale
b Length of bar tack
c 5 mm (3/16 inch)
1
DECORATIVE STITCHING
Stitch Name
Pattern
Presser Foot
Pattern No.
100 stitches
model
80/90 stitches
model
60/70 stitches
model
50 stitches
model
40 stitches
model
30 stitches
model
20 stitches
model
Fagoting
stitch
J 19191717171715
J 202018181818 -
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info