718836
30
Zoom out
Zoom in
Previous page
1/72
Next page
28
SEWING BASICS
d
Release the presser foot locking pin (black button).
The presser foot remains level, allowing the
fabric to be fed.
After the seam is sewn, the presser foot will
return to its original angle.
Note
Before start sewing, baste together the fabric and the
hook-and-loop fastener.
Make sure that the needle passes through the hook-and-loop
fastener by turning the handwheel and lower the needle into
the hook-and-loop fastener before sewing. And then, sew the
edge of the hook-and-loop fastener at a slow speed.
If the needle does not pass through the hook-and-loop
fastener, replace the needle with the needle for thick
fabrics (
page 19
).
a Edge of the hook-and-loop fastener
When sewing thin fabrics, the stitching may become
misaligned or the fabric may not feed correctly. If this
occurs, place thin paper or stabilizer material under
the fabric and sew it together with the fabric. When
you have finished sewing, tear off any excess paper.
a Stabilizer material or paper
First, baste the pieces of fabric together, and then sew
without stretching the fabric.
a Basting
Removing the flat bed attachment makes it easier to sew cylindrical
pieces such as cuffs and pant legs, or hard-to-reach areas.
a
Slide the flat bed attachment to the left to release it.
a Flat bed attachment
With the flat bed attachment removed, free-
arm sewing is possible.
When sewing cylindrical pieces, follow the next step.
Note
When you are finished with free-arm sewing, install
the flat bed attachment back in its original position.
b
Slide the part that you wish to sew onto the arm,
and then sew from the top.
CAUTION
If fabric more than 6 mm (15/64 inch) thick is
sewn or if the fabric is pushed with too much
force, the needle may bend or break.
Sewing hook-and-loop fastener
CAUTION
Use only the ungummed hook-and-loop fastener
which is for sewing. If the glue is attached to the
needle or the bobbin hook race, it may cause
malfunction.
If the hook-and-loop fastener is sewn with the thin
needle (65/9-75/11), the needle may bend or break.
Sewing thin fabrics
Sewing stretch fabrics
Stitching cylindrical pieces
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info