718836
24
Zoom out
Zoom in
Previous page
1/72
Next page
22
KNOWING YOUR SEWING MACHINE
j
Select a stitch.
For details on selecting a stitch, refer to
“Selecting a stitch” (page 24).
For details on the stitches that can be sewn
with the twin needle, refer to “STITCH
SETTINGS” (page 50).
k
Start sewing.
For details on starting to sew, refer to “Starting to
sew” (page 25).
X Two lines of stitching are sewn parallel to
each other.
Note
When using the twin needle, the stitches may
become bunched together, depending on the types
of thread and fabric that are used. If this occurs,
increase the stitch length. For details on adjusting
the stitch length, refer to “Adjusting the stitch
length and width” (page 24).
Replace the presser foot as described below.
a
Raise the needle by turning the handwheel
toward you (counterclockwise) so that the mark
on the wheel points up. (With models equipped
with (needle position button), raise the
needle by pressing once or twice.)
b
If the sewing machine has been turned on, turn
it off.
c
Raise the presser foot lever.
CAUTION
After adjusting the stitch width, slowly turn the
handwheel toward you (counterclockwise) and
check that the needle does not touch the presser
foot. If the needle hits the presser foot, the
needle may bend or break.
CAUTION
When changing the sewing direction, be sure to
raise the needle from the fabric, and then raise
the presser foot lever and turn the fabric.
Otherwise the needle may break or the machine
may be damaged.
Do not try turning the fabric with the twin
needle left down in the fabric, otherwise the
needle may break or the machine may be
damaged.
REPLACING THE PRESSER
FOOT
CAUTION
Always turn off the power before you change
the presser foot. If you leave the power on and
step on the controller, the machine will start
and you may be injured.
Always use the correct presser foot for the stitch
pattern you have chosen. If you use the wrong
presser foot, the needle may strike the presser
foot and bend or break, and may cause injury.
Use presser feet that have been designed to be
used with this machine.
Replacing the presser foot
a Mark b Needle position button
CAUTION
Before replacing the presser foot, be sure to
turn off the sewing machine, otherwise injuries
may occur if the foot controller or the start/stop
button is accidentally pressed and the machine
starts sewing.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info