718836
12
Zoom out
Zoom in
Previous page
1/72
Next page
10
KNOWING YOUR SEWING MACHINE
This section describes how to wind the thread onto the
bobbin.
For details on the fast bobbin winding, see page 12.
a
Press down on the spool pin lever to swing up
the spool pin. Then remove the spool cap.
a Spool pin
b Spool cap
b
Fully insert the spool of thread for the bobbin,
and then slide the spool cap onto the spool pin.
The thread should be unwound from the
bottom to the front.
Memo
When sewing with fine, cross-wound thread, use
the small spool cap, and leave a small space
between the cap and the spool.
THREADING THE MACHINE
Winding the bobbin
CAUTION
Use bobbins (part code: SA156, SFB: XA5539-
151) that have been designed for this sewing
machine.
We designed the bobbin that comes with this
machine. If you use bobbins from other models,
the machine will not work properly. Use the
bobbin that comes with this machine or bobbins
of the same type (part code: SA156, SFB:
XA5539-151).
Actual size
This model Other models
11.5 mm
(7/16 inch)
CAUTION
Do not grab the bar to raise the spool pin,
otherwise, the spool pin may bend or break.
Be sure to raise the spool pin when winding the
bobbin. The thread may become tangled if the
bobbin winder is used without raising the spool
pin.
CAUTION
If the spool or the spool cap is not positioned
correctly, the thread may become tangled
around the spool pin or the machine may be
damaged.
Three spool cap sizes are available, allowing
you to choose a spool cap that best fits the size
of spool being used. If the spool cap is too small
for the spool being used, the thread may catch
on the slit in the spool or the machine may be
damaged.
a
c
b
a Spool cap (small)
b Spool
(cross-wound thread)
c Space
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info