718712
60
Zoom out
Zoom in
Previous page
1/72
Next page
58
APPENDIX
g
Insert the bobbin case so that the
mark on the
bobbin case aligns with the
mark on the machine.
Align the and marks.
Make sure that the indicated points are aligned
before installing the bobbin case.
h
As shown, insert the tab on the needle plate
cover into the hole in the needle plate, and then
correctly position of the needle plate cover.
a Needle plate cover
b Tab
c Hole
Check that the needle plate cover is flush with
the top surface of the machine.
i
From the front, slide the needle plate cover back
into position.
a Needle plate cover
If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself. If you need
additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at “ http://
support.brother.com/ ” .
If the problem persists, contact your dealer or the
nearest authorized service center.
Detailed causes and remedies for common
troubleshooting topics are described below. Be sure to
refer to this before contacting us.
CAUTION
Never use a bobbin case that is scratched, otherwise
the upper thread may become tangled, the needle
may break or sewing performance may suffer. For a
new bobbin case (part code: XE7560-001), contact
your nearest authorized service center.
Make sure that you fit the bobbin case properly,
otherwise the needle may break.
a Bobbin case
b mark
c mark
CAUTION
If the needle plate cover is not flush with the
surface of the machine as shown below, remove
the needle plate cover (step d), and then install
it again (steps
h and i). Sewing while the
needle plate cover is not flush with the surface
of the machine may cause the needle plate
cover to come off of the machine, resulting in
injuries if your fingers touch the race.
TROUBLESHOOTING
Frequent troubleshooting topics
Upper thread tightened up page 59
Tangled thread on wrong side of
fabric
page 59
Incorrect thread tension page 59
Fabric is caught in the machine and
cannot be removed
page 60
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info