718712
35
Zoom out
Zoom in
Previous page
1/72
Next page
33
3
The maximum buttonhole length is about 28 mm (1-1/
8 inches) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot
to the back, as shown below.
a Reinforcement stitching
Part names of the buttonhole foot “A”
a Button guide plate
b Presser foot scale
c Pin
d Marks on buttonhole foot
e 5 mm (3/16 inch)
a
Use chalk to mark the position and length of the
buttonhole on the fabric.
a Marks on fabric
b Buttonhole sewing
b
Pull out the button guide plate of buttonhole
foot “A”, and then insert the button that will be
put through the buttonhole.
The size of the buttonhole is set.
If the button does not fit in the button guide
plate
Add together the diameter and thickness of the
button, and then set the button guide plate to
the calculated length. (The distance between
the markings on the presser foot scale is 5 mm
(3/16 inch).)
Example: For a button with a diameter of 15 mm (9/
16 inch) and a thickness of 10 mm (3/8 inch), the
button guide plate should be set to 25 mm (1 inch)
on the scale.
c
Attach buttonhole foot “A”.
d
Select a stitch.
e
Pass the upper thread down through the hole in
the presser foot.
CAUTION
Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or (start/
stop button) is accidentally pressed and the
machine starts sewing.
A
A
a Presser foot scale
b Length of buttonhole
(Diameter + thickness of button)
c 5 mm (3/16 inch)
4
5
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info