718712
32
Zoom out
Zoom in
Previous page
1/72
Next page
30
UTILITY STITCHES
Straight stitches are used for sewing plain seams.
a
Baste or pin together the fabric pieces.
b
Attach zigzag foot “J”.
c
Select a stitch.
For details, refer to “Selecting a stitch”
(page 24).
d
Lower the needle into the fabric at the
beginning of the stitching.
e
Start sewing.
For details, refer to “Starting to sew” (page 25).
For details on sewing reverse/reinforcement
stitches, refer to “Sewing reinforcement
stitches” (page 26).
f
When sewing is finished, cut the thread.
For details, refer to “Starting to sew” (page 25).
Changing the needle position
With the straight stitch (left needle position) and the
triple stretch stitch, the needle position can be
adjusted. Pressing the “+” side of the stitch width
adjustment key moves the needle to the right;
pressing the “–” side of the stitch width adjustment
key moves the needle to the left.
a Stitch width
b Stitch width adjustment key
c Left needle position
d Right needle position
You can use the Blind Hem Stitch to finish the edge of a
project, like the hem of a pair of trousers, without the stitch
showing.
Memo
When selecting stitch or . Stitch numbers
“0”, “-1”, “-2” or “-3” may be displayed on the LCD
by pressing “-” side of the stitch width adjustment
key, then the needle drop point will be changed to
the left. Stitch numbers “0”, “1”, “2” or “3” may be
displayed on the LCD by pressing “+” side of the
stitch width adjustment key, then the needle drop
point will be changed to the right.
When the size of cylindrical pieces is too small to
slide onto the arm or the length is too short, the
fabric will not feed and desired results may not be
achieved.
BASIC STITCHING
Stitch Name
Pattern
Presser Foot
Pattern No.
100 stitches
model
80/90 stitches
model
60/70 stitches
model
50 stitches
model
40 stitches
model
30 stitches
model
20 stitches
model
Straight
Left J 00000000000000
Center
J 01010101010101
Triple stretch
stitch
J 02020202020202
CAUTION
Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or (start/
stop button) is accidentally pressed and the
machine starts sewing.
Basic stitching
BLIND HEM STITCHING
Stitch Name
Pattern
Presser Foot
Pattern No.
100 stitches
model
80/90 stitches
model
60/70 stitches
model
50 stitches
model
40 stitches
model
30 stitches
model
20 stitches
model
Blind hem
stitch
R 10100909090909
R 11111010101010
CAUTION
Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or (start/
stop button) is accidentally pressed and the
machine starts sewing.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info