718712
27
Zoom out
Zoom in
Previous page
1/72
Next page
25
2
b
Press the “+” or “–” side of (stitch length
adjustment key) to increase or reduce the stitch
length.
a Stitch length
b Stitch length adjustment key
c Short
d Long
c
Press the “+” or “–” side of (stitch width
adjustment key) to increase or reduce the stitch
width.
a Stitch width
b Stitch width adjustment key
c Narrow
d Wide
Note
When the stitch length or stitch width is changed
from the standard setting, around or
disappears from the LCD.
a
Raise the needle by turning the handwheel toward
you (counterclockwise) so that the mark on the
wheel points up. (With models equipped with
(needle position button), raise the needle by
pressing once or twice.)
b
Raise the presser foot lever.
c
Place the fabric under the presser foot, pass the thread
under the presser foot, and then pull out about 5 cm (2
inches) of thread toward the rear of the machine.
d
While holding the end of the thread and the fabric
with your left hand, turn the handwheel toward you
(counterclockwise) with your right hand to lower
the needle to the starting point of the stitching.
e
Lower the presser foot lever.
f
On models equipped with a sewing speed controller, slide
the sewing speed controller to the left or right to adjust
the sewing speed. Refer to “Sewing speed controller (for
models equipped with the start/stop button)” (page 9).
a Sewing speed controller
g
Slowly press down on the foot controller. (With
models equipped with (start/stop button), if the
foot controller is not connected, press once.)
aStart/stop button
The machine starts sewing.
CAUTION
After adjusting the stitch width, slowly turn the
handwheel toward you (counterclockwise) and
check that the needle does not touch the presser
foot. If the needle hits the presser foot, the
needle may bend or break.
If the stitches are bunched together, increase the stitch
length. Continuing to sew with the stitches bunched
together may result in the needle bending or breaking.
Starting to sew
a Mark b Needle position button
a Presser foot lever
a 5 cm (2 inches)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info