718712
8
Zoom out
Zoom in
Previous page
1/72
Next page
6
KNOWING YOUR SEWING MACHINE
a Needle threader (for models equipped with the needle
threader) (page 17)
b Buttonhole lever (page 34 and 42)
c Presser foot holder
The presser foot is installed onto the presser foot holder.
d Presser foot holder screw
Use the presser foot holder screw to hold the presser foot
holder in place.
e Presser foot
The presser foot applies pressure consistently on the fabric
as the sewing takes place. Attach the appropriate presser
foot for the selected stitching.
f Needle plate cover release
Use when removing the needle plate cover.
g Needle plate cover
h Feed dogs
The feed dogs feed the fabric in the sewing direction.
i Quick-set bobbin (for models equipped with the quick-set
bobbin)
You can start sewing without pulling up the bobbin thread.
j Bobbin cover
k Needle plate
The needle plate is marked with guides for sewing straight
seams.
l Needle bar thread guide (page 16)
m Presser foot lever
Raise and lower the presser foot.
n Needle clamp screw
The operation buttons differ depending on the sewing
machine model.
a Reverse/reinforcement stitch button
Press the reverse/reinforcement stitch button to sew
reverse stitches. Reverse stitches are sewn by keeping the
button pressed down to sew in the opposite direction. For
details, refer to “Sewing reinforcement stitches” (page 26).
Buttons provided on some models
b Start/stop button
Press the start/stop button to start or stop sewing. The
machine sews at a slow speed at the beginning of sewing
while the button is depressed. When sewing is stopped,
the needle is lowered in the fabric. For details, refer to
“Starting to sew” (page 25).
c Needle position button
Press this button to raise or lower the needle.
d Sewing speed controller
Slide this controller to adjust the sewing speed.
The operation panel allows you to select a stitch and
specify how the stitch will be sewn. The operation
panel differs depending on the sewing machine model.
a LCD (liquid crystal display)
The number of the selected stitch (
1), the presser foot
type to be used (
2), the stitch length (mm) (3), and the
stitch width (mm) (
4) are displayed here.
b Stitch selection keys (page 24)
Select the number for the stitch that you wish to use.
c Stitch length adjustment key
Press the “–” side to reduce the stitch length; press the “+”
side to increase the stitch length.
d Stitch width adjustment key
Press the “–” side to reduce the stitch width; press the “+”
side to increase the stitch width.
Keys and indicators provided on some models
Needle and presser foot section
Operation buttons
Operation panel
56
78
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info