631250
42
Zoom out
Zoom in
Previous page
1/67
Next page
34
1
2
+
3
4
+
Buttonhole Fine Adjustment
If the stitching on the two sides of the buttonhole do not appear
uniform, the following adjustments can be made.
1. After sewing the left side of the buttonhole, stitch the right side
and observe the feeding.
2. If the right side is too coarse or fine compared to the left side,
adjust the buttonhole fine-adjusting screw as described
below.
If the right side is too coarse, turn the buttonhole fine-adjusting
screw with the enclosed large screwdriver in the – direction.
If the right side is too fine, turn the buttonhole fine-adjusting
screw with the enclosed large screwdriver in the + direction.
This adjustment allows both sides of the buttonhole to appear
uniform.
a Buttonhole fine-adjusting screw
b Right row
c Too coarse
d Too fine
Equilibrage des boutonnières
Si les points de chaque côté de la boutonnière sont
dissemblables, procéder aux réglages suivants:
1. Lorsque l’on obtient un entraînement satisfaisant pour la lèvre
gauche, coudre la lèvre droite de la boutonnière et observer
l’entraînement.
2. Si la lèvre droite est trop dense ou trop espacée par rapport à
la lèvre gauche, régler la vis d’équilibrage des boutonnières,
comme indiqué ci-dessous.
Si le côté droit est trop dense, à l’aide du grand tournevis fourni,
tourner la vis d’équilibrage des boutonnières dans le sens du -.
Si le côté droit est trop fin, à l’aide du grand tournevis fourni,
tourner la vis d’équilibrage des boutonnières dans le sens du +.
Ce réglage rend les deux lèvres de la boutonnière uniformes.
a Vis d’équilibrage des boutonnières
b vre droite
c Trop dense
d Trop fin
Ajuste fino de los ojales
Si las puntadas en ambos lados del ojal no parecen ser uniformes, se
pueden hacer los siguientes ajustes.
1. Después de coser la parte izquierda del ojal, cosa la parte derecha
y mire la alimentación del tejido.
2. Si la parte derecha del ojal es demasiada gruesa o fina con
relación a la parte izquierda, apriete o suelte el tornillo para
ajuste fino del ojal tal como se describe a continuación.
Si la parte derecha es demasiada gruesa, con el destornillador que se
incluye, gire el tornillo en el sentido del -.
Si la parte derecha es demasiada fina, con el grande destornillador
incluido, gire dicho tornillo en el sentido del +.
Este ajuste permite que ambos lados del ojal parezcan uniformes.
a Tornillo de ajuste fino de ojal
b Lado derecho
c Demasiado grueso
d Demasiado fino
Ajuste do caseado
Se as costuras de ambos os lados da botoeira não estiverem uniformes,
seguleas como fegue:
1. Depois de costurer o lado esquerdo da casa, costure o lado direito e
observe a alimentação do teado.
2. Se o lado direito estiver mais fino ou mais cheio do que o lado
esquerdo, gise o parafuso de ajuste do caseado da forma abaixo
indicada.
Se o lado direito estiver muito fino, gire o parafuso regulagem do
caseado com a chave de fendas grande, na direção -. Se o lado
direito estiver muito (cheio/largo), gire o botão na direção +.
Esta regulagem permite uniformizar os dois lados do caseado.
a Parafuso de ajuste do caseado
b Lado direito (do caseado)
c Muito cheio
d Muito fino
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JS-23 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JS-23 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother JS-23

Brother JS-23 User Manual - German, Dutch, French, Italian - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info