631249
42
Zoom out
Zoom in
Previous page
1/84
Next page
31
STRAIGHT AND ZIGZAG STITCHING
SUORA- JA SIKSAKOMMEL
PUNTADAS RECTAS Y ZIGZAG
ПРЯМАЯ СТРОЧКА И СТРОЧКА “ЗИГЗАГ”
Zigzag Stitching
STITCH LENGTH 1-4 (For the Satin Stitch, set at F.)
STITCH WIDTH 1-5 (For twin needle sewing, always use a
setting of less than 3.)
NEEDLE POSITION M, L, R (For twin needle sewing, always set
at M.)
PRESSER FOOT Zigzag
NEEDLE Single or Twin
Simple Zigzag Stitch
Set the stitch length between 1 and 4 for a simple zigzag stitch.
NOTE:
Zigzag stitching requires less upper thread tension than straight stitch-
ing.
1. With the stitch length set between 0 and 1, sew 5-6 straight stitches
for reinforcement.
2. Set the stitch width to your desired width and begin sewing.
3. Reset the stitch width to between 0 and 1 to reinforce the stitches
again before removing the work from the machine.
Satin Stitch
When the stitch length is set in the F range and the stitch width is set
above 1, it produces a Satin Stitch (a close zigzag stitch). The Satin
Stitch can be used for making buttonholes and decorative stitches or
edging.
NOTE:
It is recommended that a test sample be made on a fabric scrap before
sewing on your project.
Siksakommel
PISTON PITUUS 1-4 (käytä laakapistoille asetusta F)
PISTON LEVEYS 1-5 (käytä kaksoisneulan kanssa aina 3:a
alhaisempaa asetusta)
NEULA-ASENTO M, L tai R (käytä kaksoisneulan kanssa aina
asentoa M)
PAININJALKA Siksak
NEULA Tavallinen tai kaksoisneula
Yksinkertainen siksakommel
Kun ompelet yksinkertaista siksakommelta, aseta piston pituudeksi arvo
1-4.
VINKKI :
Siksakompeleessa ylälanka on löysemmällä kuin suoraompeleessa.
1. Aseta piston pituus arvoon 0-1 ja ompele 5-6 suoraa
vahvistusommelta.
2. Aseta piston pituus haluamaasi arvoon ja aloita ompeleminen.
3. Aseta piston pituus uudelleen arvoon 0-1 ja ompele vahvistuspistot
ennen kankaan poistamista koneesta.
Laakaommel
Kun piston pituus on asetettu F-alueelle ja piston leveys on yli 1, saa-
daan tulokseksi laakapistoja (tiheää siksakommelta). Laakaommel so-
veltuu napinläpien ompeluun, koristeompeluun ja reunojen ompeluun.
VINKKI :
Suosittelemme ompeleen testausta kankaanpalalle ennen varsinaisen
ompelun aloittamista.
08C713_XE4683-001_P25-32 2008.04.02, 09:3131
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JS-20 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info