631248
64
Zoom out
Zoom in
Previous page
1/116
Next page
UTILITY STITCHES ——————————————————————————————————————————————————————————————————
——
62
Changing the stitch length
Press the “+” or “–” side of the stitch length key to
adjust the stitch length.
Pattern numbers vary depending on the
machine model. Refer to “Stitch Settings”
(page 89) for pattern numbers.
a Stitch length key
b Stitch length
c Fine
d Coarse
If the fabric does not feed (for example, if it is
too thick), increase the coarseness of the
stitching.
Changing the stitch width
Press the “+” or “–” side of the stitch width key to
adjust the stitch width.
Pattern numbers vary depending on the
machine model. Refer to “Stitch Settings”
(page 89) for pattern numbers.
a Stitch width key
b Stitch width
c Narrow
d Wide
Memo
Before sewing buttonholes, check the stitch
length and width by sewing a trial
buttonhole on a scrap piece of fabric.
Sewing buttonholes on stretch fabrics
When sewing buttonholes on stretch fabrics, use a
gimp thread.
a
Hook the gimp thread onto the part of
buttonhole foot “A” shown in the illustration
so that it fits into the grooves, and then
loosely tie it.
b
Turn on the sewing machine.
c
Select stitch or .
d
Attach buttonhole foot “A”.
For details, refer to “Replacing the presser
foot” (page 33).
e
Adjust the stitch width to the thickness of the
gimp thread.
f
Lower the presser foot lever and the
buttonhole lever, and then start sewing.
g
When sewing is finished, gently pull the gimp
thread to remove any slack.
h
Use a handsewing needle to pull the gimp
thread to the wrong side of the fabric, and
then tie it.
i
With a seam ripper, cut the middle part of the
gimp thread remaining at the top end of the
buttonhole.
Trim off any excess of the gimp thread.
+
+
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JK7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JK7000 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info