631247
27
Zoom out
Zoom in
Previous page
1/116
Next page
25
1
d
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
a 5 cm (2 inches)
X The upper threading is finished.
Now that the upper threading and the
lower threading are finished, you are
ready to begin sewing.
Note
If the needle is not raised, the needle
threader cannot thread the needle. Be sure
to press (needle position button) to raise
the needle before using the needle threader.
For models without the thread guide disk
a
While lowering the needle threader lever,
hook the thread onto the guide.
a Needle threader
b Thread
c Guide
b
Catch the thread on the hook as shown below.
a Needle threader lever
c
Raise the needle threader lever, and then pull
the end of the thread which passed through
the eye of the needle.
d
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
a 5 cm (2 inches)
X The upper threading is finished.
a
Be careful not to pull on the thread with force
or it may bend the needle.
a
CAUTION
a
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JK4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JK4000 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info