631233

Brother JK1700 Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
—
————————————————————————————————————————————————
—————
5
THE MAIN PARTS
1 Bobbin winder (Page 11)
This winds the thread onto the bobbin for use as the
lower thread.
2 Spool pin (Page 11, 15)
This holds the spool of thread.
3 Upper tension-control dial (Page 25)
This controls the tension of the upper thread.
4 Thread guide (Page 11, 15)
This is used when winding the thread onto the
bobbin and then threading the machine.
5 Thread take-up lever (Page 16)
6 Thread cutter (Page 22)
Pass the threads through the thread cutter to cut
them.
7 Needle threader (Page 17)
(This is only available on certain models.)
8 Quick-set bobbin (Page 14, 19)
(This is only available on certain models.)
9 Flat bed attachment with accessory compartment
(Page 5)
0 Presser foot (Page 8)
A Reverse sewing lever (Page 10)
Push this lever to stitch in the reverse direction.
B Pattern selection dial (Page 9)
Rotate the dial in either direction to choose the
stitch you want.
C Handwheel
Used to manually raise and lower the needle.
D Buttonhole fine-adjustment screw (Page 31)
E Main power and sewing light switch (Page 7)
You can turn the main power and sewing light
switch on and off.
F Foot controller jack / socket (Page 6)
Plug in the foot controller plug and connect the
machine to the power supply.
G Presser foot lever (Page 15)
Used to raise and lower the presser foot.
H Foot controller (Page 7)
You can use this to control the sewing speed, and to
start and stop sewing.
Foot Controller:
Model KD-1902 for 110-120V area
KD-1902 for 110-127V area (Brazil only)
Model KD-2902 for 220-240V area
The foot controller part code differs depending on the
country or region. Contact your dealer or the nearest
authorized service center.
Flat bed attachment
The accessories can be stored in a compartment inside
the flat bed attachment.
1
Slide the flat bed attachment to the left to
open it.
1 Flat bed attachment
2 Storage compartment
1
2
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JK1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JK1700 in the language / languages: English as an attachment in your email.

The manual is 12,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info