631232
37
Zoom out
Zoom in
Previous page
1/40
Next page
36
6
The needle is bent or blunt. Replace the needle. 7
The upper
thread
breaks.
The needle is incorrectly installed. Correctly install the needle. 7
The area around the hole in the needle
plate or the presser foot is scratched.
Replace the needle plate.
Contact your retailer or the nearest
authorized service center.
The bobbin case is scratched, or has a burr
on it.
Replace the bobbin case.
Contact your retailer or the nearest
authorized service center.
You have not used a bobbin that has been
designed for this machine.
Use a bobbin that has been designed for
this machine.
11
The lower
thread is
tangled or
breaks.
You have not wound the bobbin thread
properly.
Wind the bobbin thread properly. 11
The bobbin is scratched or does not turn
smoothly.
Replace the bobbin.
The thread is tangled.
Remove the tangled thread and clean
the race.
33
You have not used a bobbin that has been
designed for this machine.
Use a bobbin that has been designed for
this machine.
11
Bobbin is set incorrectly. Reset the bobbin thread correctly. 13
The thread
tension is
incorrect.
You have not threaded the upper thread
properly.
Correct the upper threading. 14
You have not wound the bobbin thread
properly.
Wind the bobbin thread properly. 11
You have not threaded the right
combination of thread and needle for the
fabric you are using.
Choose a thread and needle that are
appropriate for the type of fabric.
17
You have not attached the presser foot
holder properly.
Attach the presser foot holder properly.
The thread tension is incorrect. Adjust the tension of the upper thread. 20
You have not used a bobbin that has been
designed for this machine.
Use a bobbin that has been designed
for this machine.
11
Bobbin is set incorrectly. Reset the bobbin thread correctly. 13
The fabric is
wrinkled.
You have not threaded the upper thread
properly or fitted the bobbin properly.
Thread the upper thread and wind the
bobbin thread properly.
11-16
You have not fitted the spool properly. Fit the spool properly. 14
You have not used the right
combination of fabric, thread and
needle.
Choose a thread and needle that are
appropriate for the type of fabric.
17
The needle is bent or blunt. Replace the needle. 7
If thin fabrics are being sewn, the fabric is
not being fed correctly.
Sew with stabilizer material under the
fabric.
20
The presser foot you are using is not
appropriate for the type of stitch that you
want to sew.
Attach the presser foot that is correct
for the type of stitch that you want to
sew.
28
The thread tension is incorrect. Adjust the tension of the upper thread. 20
Symptom Possible cause How to put it right Page
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother J17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother J17 in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother J17

Brother J17 User Manual - German - 40 pages

Brother J17 User Manual - Dutch - 40 pages

Brother J17 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info