718833
27
Zoom out
Zoom in
Previous page
1/47
Next page
26
2
Attaching the extra spool pin
Put the extra spool pin in the hole on the top of the
machine. Put the second spool of thread onto the
extra spool pin.
Twin needle threading
You should thread each needle separately.
Note
Models equipped with a needle threader
You cannot use the needle threader to
thread the twin needle. Instead, thread the
twin needle by hand, from front to back.
Using the needle threader may damage the
machine.
1
Use the thread from the first spool to
thread the machine to the needle bar
thread guide.
The path for threading the machine to the
needle bar thread guide is the same as for
normally threading the machine (for a single
needle). See page 18 for more details.
2
Thread the left needle from front to back.
3
Use the thread from the second spool to
thread the machine to the thread take-up
lever.
The path for threading the machine to the thread
take-up lever is the same as for normally
threading the machine (for a single needle). See
page 18 for more details.
4
Thread the right needle from front to
back.
Do not pass the thread behind the needle bar
thread guide.
1 Left needle thread passes through the needle
bar thread guide.
2 Right needle thread passes in front of the needle
bar thread guide.
3 Needle bar thread guide
5
Attach zigzag foot “J”.
For details on changing the presser foot, refer
to “Changing the presser foot” on page 10.
CAUTION
6
Turn on the machine.
CAUTION
1 First spool
2 Second spool
When using the twin needle, be sure to
attach zigzag foot “J”, otherwise the
needle may break or the machine may be
damaged.
Do not turn on the machine while
pressing down the foot controller. The
machine may start unexpectedly and
cause personal injury or damage to the
machine.
1
3
2
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother J14S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother J14S in the language / languages: English as an attachment in your email.

The manual is 12,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother J14S

Brother J14S User Manual - German - 47 pages

Brother J14S User Manual - Dutch - 47 pages

Brother J14S User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info