718773
81
Zoom out
Zoom in
Previous page
1/236
Next page
SEWING
Sewing Basics
79
2
a
Insert the foot controller plug into its jack
on the machine.
a Foot controller
b Foot controller jack
b
Slowly depress the foot controller to start
sewing.
Pressing down on the foot controller increases the
sewing speed; releasing the pressure on the foot
controller decreases the sewing speed.
c
Release the foot controller to stop the
machine.
Sewing Reinforcement Stitches
Reverse/reinforcement stitches are generally
necessary at the beginning and end of sewing. You
can use the “Reverse Stitch” button to sew reverse/
reinforcement stitches. When you keep pressing
“Reinforcement Stitch” button, the machine will
sew reinforcement stitch at that point 3 to 5
stitches, and then stop. (page 15)
a “Reverse Stitch” button
b “Reinforcement Stitch” button
If the automatic reinforcement stitch is selected on
the screen, reverse stitches (or reinforcement
stitches) will be sewn automatically at the
beginning of sewing when the “Start/Stop” button
is pressed. Press “Reverse Stitch” button or
“Reinforcement Stitch” button to sew reverse
stitches (or reinforcement stitches) automatically at
the end of sewing (Refer to the next procedure
“Automatic Reinforcement Stitching”.).
a Reverse stitch
b Reinforcement stitch
The operation performed when the button is
pressed differs depending on the selected stitch
pattern. (Refer to “STITCH SETTING CHART” on
page 218.)
Automatic Reinforcement
Stitching
After selecting a stitch motif, turn on the automatic
reinforcement stitching function before sewing,
and the machine will automatically sew
reinforcement stitches (or reverse stitches,
depending on the stitch motif) at the beginning
and end of sewing.
Memo
The speed that is set using the sewing
speed controller is the foot controller’s
maximum sewing speed.
a
b
Memo
When you press the “Reinforcement Stitch”
button while sewing character/decorative
stitch pattern, you can end sewing with a
full stitch instead of at a mid-point.
The green light on the right of the
“Reinforcement Stitch” button lights up
while the machine is sewing a full motif, and
it automatically turns off when the sewing is
stopped.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Innov-is XP1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is XP1 in the language / languages: English as an attachment in your email.

The manual is 8,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is XP1

Brother Innov-is XP1 User Manual - English - 204 pages

Brother Innov-is XP1 User Manual - German - 204 pages

Brother Innov-is XP1 User Manual - German - 236 pages

Brother Innov-is XP1 User Manual - Dutch - 204 pages

Brother Innov-is XP1 User Manual - Dutch - 236 pages

Brother Innov-is XP1 User Manual - French - 204 pages

Brother Innov-is XP1 User Manual - French - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info